OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Body Panels & Repair > Ghia > Floor Pan
11 products found
Sort By:
1
Floor Pan Bolt (Pan to Body, Chassis to Mounting Bolt), 8 x 1.25mm
Floor Pan Bolt (Pan to Body, Chassis to Mounting Bolt), 8 x 1.25mm
Price: $0.95
SALE ITEM! use code TOOMANY30

Floor Pan Bolt (Pan to Body, Chassis to Mounting Bolt), 8 x 1.25mm is the pointy bolt that you can drive through rust and the floor pan gasket, to bolt your VW Body down tight to the floor pan or chassis. This does not include the washer. more info
Floor Pan Washer (Pan to Body, Chassis to Mounting Washer), 311-899-131
Floor Pan Washer (Pan to Body, Chassis to Mounting Washer), 311-899-131
Price: $1.95
SALE ITEM! use code TOOMANY30

Floor Pan Washer (Pan to Body, Chassis to Mounting Washer), 311-899-131 is the washer the pointy pan bolt goes through, to bolt your VW Body down tight to the floor pan or chassis. This does not include the bolt. The Beetle needs 18 washers to do one full chassis, the Ghia needs 24. more info
"Large" Floor Pan BOLT (Pan to Body, Chassis to Mounting Bolt), 10 x 1.5 x 50mm, EACH, 111-899-147
"Large" (50mm long) Floor Pan BOLT (Pan to Body, Chassis to Mounting Bolt), 10 x 1.5 threads, EACH, 111-899-147
Price: $1.95
SALE ITEM! use code TOOMANY30

"Large" Floor Pan BOLT (Pan to Body, Chassis to Mounting Bolt), 10 x 1.5 x 50mm, EACH, 111-899-147 is the larger floor pan bolt near the front of the pan. Most kits don't include these, and they can be tough to find! more info
Shock Pad, Body to Axle Beam, Front, All Standard Beetle, Karmann Ghia, and Thing, PAIR, 111-899-123A-111-123A
Shock Pad, Body to Axle Beam, Front, All Standard Beetle, Karmann Ghia, and Thing, PAIR, 111-899-123A-111-123A
Price: $4.95

Shock Pad, Body to Axle Beam, Front, All Standard Beetle, Karmann Ghia, and Thing, PAIR, 111-899-123A-111-123A sit on top of the axle beam to prevent body flex and vibration. The pan bolts pass thru the washers then these pads, holding the body tight! more info
Shock Pad, Body to Chassis, Rear, 10mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-117B-113-115A
Shock Pad, Body to Chassis, Rear, 10mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-117B-113-115A
Price: $5.95
SALE ITEM! use code TOOMANY30

Shock Pad, Body to Chassis, Rear, 10mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-117B-113-115A sit between the pan and body, and dampen road vibration. Typically there are 2 thicknesses used, 10mm and 17mm, these are the 10mm. Ideally you'd buy 2 sets of the 10mm thick, and 1 set of the thicker ones. Put the thin ones on all 4s, and IF there is a gap at one of the locations (typically the rear one in the rear wheel well), swap them out for the thicker ones, then bolt it down.

Warning: it's very common for the bolt that holds the body to the chassis to be very seized, be sure to use a lot of penetrating oil and work it back and forth to loosen it, shearing it off is a pain to deal with!

Also, if you have a 1968 and later car with a "clunk" in the back that you can't figure out (you'd changed shocks with no luck), usually the rear pads are compressed, and the body has a gap to the chassis. The body is flexing when you hit a bump, and hitting the pad. Using the thick pad and tightening the bolt down to prevent the flex will solve the problem!

 more info
Shock Pad, Body to Chassis, Rear, 17mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-115A-113-115
Shock Pad, Body to Chassis, Rear, 17mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-115A-113-115
Price: $5.95

Shock Pad, Body to Chassis, Rear, 17mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-115A-113-115 sit between the pan and body, and dampen road vibration. Typically there are 2 thicknesses used, 10mm and 17mm, these are the 17mm. Ideally you'd buy 2 sets of the 10mm thick, and 1 set of the thicker ones. Put the thin ones on all 4s, and IF there is a gap at one of the locations (typically the rear one in the rear wheel well), swap them out for the thicker ones, then bolt it down.

Warning: it's very common for the bolt that holds the body to the chassis to be very seized, be sure to use a lot of penetrating oil and work it back and forth to loosen it, shearing it off is a pain to deal with!

Also, if you have a 1968 and later car with a "clunk" in the back that you can't figure out (you'd changed shocks with no luck), usually the rear pads are compressed, and the body has a gap to the chassis. The body is flexing when you hit a bump, and hitting the pad. Using the thick pad and tightening the bolt down to prevent the flex will solve the problem!

 more info
Battery Hold Down Clamp, 1967 and Later Beetle and Super Beetle, 1968-71 Ghia, 1968-71 Type 2, 1967 and Later Type 3, 131-915-313
Battery Hold Down Clamp, 1967 and Later Beetle and Super Beetle, 1968-71 Ghia, 1968-71 Type 2, 1967 and Later Type 3, 131-915-313
Price: $7.95
SALE ITEM! use code TOOMANY30

Battery Hold Down Clamp, 1967 and Later Beetle and Super Beetle, 1968-71 Ghia, 1968-71 Type 2, 1967 and Later Type 3, 131-915-313 hold the battery down tight, so it doesn't flop and bounce around, which can cause major clunking and even a fire if the battery grounds out! more info
Floor Pan Gasket, Beetle, Super Beetle, Thing, and Ghia, 19' Long, 113-701-605-113-605
Floor Pan Gasket, Beetle, Super Beetle, Thing, and Ghia, 19' Long, 113-701-605-113-605
Price: $27.95

Floor Pan Gasket, Beetle, Super Beetle, Thing, and Ghia, 19' Long, 113-701-605-113-605 seals the mating surfaces/gap between the body and the floor pan. Cushion design allows it to be used in locations other than it's intended use! Water tight seal, and you can finish the seal with some UV Resistant Household silicone. more info
Rattle Trap Extreme Super Stick Sound Deadener, 80 mil Nominal Thickness, 50sq' (33.5' x 18" Roll)
Rattle Trap Extreme Super Stick Sound Deadener, 80 mil Nominal Thickness, 50sq' (33.5' x 18" Roll)
Price: $109.95

Want to make your VW Quieter? Rattle Trap Extreme Super Stick Sound Deadener, 80 mil Nominal Thickness, 50sq' (33.5' x 18" Roll) is the finest sound deadener we have found! We tried them all, and they were either too expensive, smelled like you just paved the inside of your car, or didn't stick! Until we came across Fat Mat and Rattle Trap! These 2 products are from the same company, but in 40 mil and 80 mil thicknesses respectively. Rattle Trap is 1/3 less than Dynamat, and we feel it works better to boot! more info
Floor Pan Half, Left, 1956-74 VW Karmann Ghia Coupe and Convertible, 141-701-059A
Floor Pan Half, Left, 1956-74 VW Karman Ghia Coupe and Convertible, 141-701-059A
Price: $199.95

Floor Pan Half, Left, 1956-74 VW Karmann Ghia Coupe and Convertible, 141-701-059A does NOT include the seat tracks. These are not as nice as original German Pans, but these are the nicest we have been able to acquire! Don't forget the pan gaskets too!

These ship ONLY within the Continental USA via GREYHOUND FREIGHT to your nearest Greyhound Freight "GPX"Depot (not to your door!) This item cannot ship internationally. more info
Floor Pan Half, Right, 1956-74 VW Karman Ghia Coupe and Convertible, 141-701-060A
Floor Pan Half, Right, 1956-74 VW Karman Ghia Coupe and Convertible, 141-701-060A
Price: $199.95

Floor Pan Half, Right, 1956-74 VW Karman Ghia Coupe and Convertible, 141-701-060A does NOT include the seat tracks. These are not as nice as original German Pans, but these are the nicest we have been able to acquire! Don't forget the pan gasket too!

These ship ONLY within the Continental USA via GREYHOUND FREIGHT to your nearest Greyhound Freight "GPX"Depot (not to your door!) This item cannot ship internationally. more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.