|
|
|
|
|
|
Fast Fab Truss Bar (Torque Bar), 1" TIG Welded Chromoly Steel- Bug, Superbeetle, and Ghia, 5400-00022
|
|
|
Fast Fab Truss Bar (Torque Bar), 1" TIG Welded Chromoly Steel- Bug, Superbeetle, and Ghia is engineered to limit flex in the chassis under load. By connecting the shock towers & frame horns together you transfer more power to the ground normally lost in wheel hop. Fits 1961 and Later Beetles, Super Beetles, and Ghias, both Swing Axle and IRS Rear Suspensions.This is a 100% complete BOLT IN kit, with no welding required! Kit includes all necessary hardware for installation. Made in USA too!
This is designed for Beetles and Ghias, if you have a custom body on a VW chassis, there is no guarantee of fitment. You MAY have fitment issues (interference), if the builder didn't follow the same lines as VW did.
|
|
|
|
|
|
|
|
|
|
Fast Fab Gauge Mounting Plate (2 Hole Gauge Panel), 1950-1977 Beetle and 56-65 Ghia, 5150-65187
|
|
|
This fantastic custom gauge panel makes mounting (2) 2 1/16" VDO gauges into your 1950-77 VW Beetle or 56-65 Ghia radio hole, without any modifications to your dash! All gauges mount behind the panel and are held in place with a metal backing plate. The steel insert is paintable (so you can color match to your dash) or you can use the panel with the matt black powder-coated panel provided.
Also included are the trim parts that match your factory trim on the glove box and fuel gauge surround, which gives your car a look that could have come from the factory. This product includes all parts needed to install in your car. Gauges not included!
|
|
|
|
|
|
|
|
|
|
Fast Fab Gauge Mounting Plate (Gauge Panel), 1958-1967 Beetle, Accepts (3) 2 1/16" Gauges, 1158-67143
|
|
|
Fast Fab Gauge Mounting Plate (Gauge Panel), 1958-1967 Beetle, Accepts (3) 2 1/16" Gauges, 1158-67143 is designed to mount in your 1958-1967 VW Beetle radio hole without any modifications to your dash! All gauges mount behind the panel and are held in place with a metal back plate. The steel insert is paintable (so you can color match to your dash) or you can use the panel with the matte black powder-coated panel provided.
Also included are the trim parts that match your factory trim on the glove box and fuel gauge surround, which gives your car a look that could have come from the factory. This product includes all parts needed to install in your car. Gauges are not included!
|
|
|
|
|
|
|
|
|
|
Fast Fab Door Sill Plates, Beetle and Super Beetle Sedan - Squares, PAIR, 1150-79003
|
|
|
Fast Fab Door Sill Plates, Beetle and Super Beetle Sedan - Squares, Pair, 1150-79003 fits all year beetle sedans. They are manufactured in the USA to factory specifications. These sill plates are made of high quality thick stainless steel that has the embossed squares pattern just like the original ones did when the cars were new. They are also embossed with the Wolfsburg crest for a finished look. All hardware included.
|
|
|
|
|
|
|
|
|
|
Fast Fab Super Beetle Strut Brace
|
|
|
If you have a Super Beetle and want it to handle, YOU NEED THIS!This product is a simple installation that simply that ties the front strut towers together (it triangulates them), giving your Super Beetle a tighter, more rigid front suspension by dramatically reducing chassis deflection. You will IMMEDIATELY notice quicker steering response, improved stability and more consistent alignment. Made in USA! This strut tower brace is a new product for strengthening the Super Beetle's weak front end structure. Plasma cut steel side plates are fixture drilled for perfect fit. The crossmember is 6061-T6 heavy wall aluminum for maximum strength. Spacer washers and all hardware are supplied to fit the bar to your chassis perfectly. We recommend that this bar be installed with our urethane lower control arm bushings for best results. If your car is suffering from the "Super Beetle Shimmy", make sure that the suspension is repaired properly BEFORE installing this item. We DO NOT make any claims that this device will stop your shimmies on its own merit. However, it will add a feeling of stability and quietness over rough roads and turns that you can feel!
|
|
|
|
|
|
|
|
|
|
Fast Fab Breather Box, 1 Quart, AN-8 Fittings
|
|
|
Construction is all Aluminum and TIG welded, and is designed to vent from the sides instead of the top like all the other brands. This allows higher mounting in a sedan and the foam filter element can be removed and cleaned without taking anything apart.
|
|
|
|
|
|
|
|
|
|
Fast Fab Billet Aluminum Oil Filter Mounting Bracket with Oil Pressure Bypass
|
|
|
Fast Fab Billet Aluminum Oil Filter Mounting Bracket with Oil Pressure Bypass, Made in USA offers top quality & looks to boot! Inlets and outlets are drilled/tapped to a standard 3/8" NPTMatches all other Fast Fab anodized products too! MADE IN USA! This is a fantastic product for you guys that use those 30mm and larger oil pumps, ESPECIALLY with 20-50 oil! The bypass sends the excess oil back to the sump, to keep oil pressures in check! You simply plumb as normal, but the third oil hose is your RETURN hose to route the excess oil volume back to the case (you'll have to put a fitting in the case or your deep sump to connect the hose to) This product lets you use the huge oil pumps and thick oil, preventing you from your oil pressure going too high, which causes the cooler relief piston to open BYPASSING THE STOCK OIL COOLER, which causes oil temps to skyrocket. The anodizing will match all other Fast Fab products too!
|
|
|
|
|
|
|
|
|
|
Fast Fab VW Beetle Bolt-On Street Wing Kit (Rear Spoiler), 1550-79189
|
|
|
Fast Fab VW Beetle Bolt-On Street Wing Kit (Rear Spoiler), 1550-79189 is a completely bolt on part, no cutting, drilling, nor welding necessary! Takes minutes to install! All parts are CNC laser cut and bent on a CNC brake from .063" thick 6061-T6 Aluminum Sheet.
The installation of this rear wing will help your car's stability over 60mph, and actually improves aerodynamics and MPG slightly.
|
|
|
|
|
|
|
|
|
|
Fast Fab Breather Box, 1 Quart, Push On Fittings
|
|
|
Construction is all Aluminum and TIG welded, and is designed to vent from the sides instead of the top like all the other brands. This allows higher mounting in a sedan and the foam filter element can be removed and cleaned without taking anything apart.
|
|
|
|
|
|
|
|
|
|
Fast Fab Door Sill Plates, Convertible Bug � Squares (Sold In PAIRS)
|
|
|
This kit fits all year convertible beetle body cars, and are made in the USA to factory specifications. These sill plates are made of high quality thick stainless steel that has the embossed squares pattern just like the original ones did when the cars were new. All hardware included.This is a PAIR. Fits Bug Convertible
|
|
|
|
|
|
|
|
|
|
Fast Fab Cruiser Pedal, fits up to 1966 Beetle
|
|
|
This Cruiser Pedal kit fits up to 1966 VW beetles. It's CNC machined from 6061 aluminum to look like the original German pedals from back in the day! This Billet Pedal will hold up better than the cheaper cast alloy versions, as well as polish brighter and stay that way longer.
This Cruiser Pedal can be taken apart with a simple Allen wrench for any maintenance without the worry of having to press any pins out. It simply presses against the stock roller pedal! "Color" is the color of the PAD on the pedal face; this picture is "Black".
|
|
|
|
|
|
|
|
|
|
Fast Fab Seal Pro Spring Loaded Push Rod Tubes, Set of 8
|
|
|
Fast Fab Seal Pro Spring Loaded Push Rod Tubes, Set of 8 are CNC machined push-rod tubes which are machined from 6061 aluminum, anodized and laser etched for long lasting good looks. Includes stainless steel washers, USA made o-rings and the best silicone push rod tube seals!
|
|
|
|
|
|
|
|
|
|
Fast Fab Billet Aluminum Etched Oil Filter Mount
|
|
|
Made in USA. This mounts is CNC machined from billet aluminum, then laser etched, and finally hard anodized for long lasting good looks. Fittings are tapped the Industry Standard 3/8" NPT. This matches all the other Fast Fab Anodized Products.
|
|
|
|
|
|
|
|
|
|
Fast Fab CNC Aluminum Gas Pedal, 1958 & Newer Type 1 & 3, 1166-79107
|
|
|
Fast Fab CNC Aluminum Gas Pedal, 1958 & Newer Type 1 & 3, 1166-79107 fits 1966 and later beetles. This CNC machined gas pedals to look like the original German pedals from 6061 aluminum. It installs just like the factory pedal using your existing pin!
|
|
|
|
|
|
|
|
|
|
Aluminum T-Bar Set, 1968-73 Beetle and Ghia, Set of 4
|
|
|
Original Cal-Look T-bars are back in polished Aluminum! These fit "Late" 1968-73 Beetles and Ghias. One set does all 4 corners of your car in classic Cal-Look Style!. These will really lighten your car and clean up the looks!
|
|
|
|
|
|
|
|
|
|
Aluminum T-Bar Set, 1967 & Earlier, Beetle and Ghia, Set of 4
|
|
|
Original Cal-Look T-bars are back in Aluminum! These fit early 1956-67 Beetles and Ghias with a classic Cal-Look appearance! One set of these does all 4 corners of your car! These will really lighten your car and clean up the "look" -- They are NOT show quality finish though, so will need some polishing work.
|
|
|
|
|
|
|
|
|
|
Fast Fab Sump Plate, Fits CB & EMPI 8 Bolt Deep Sumps
|
|
|
Fast Fab 8 Bolt Sump Plate Fits Deep Sumps with the LARGER THAN STOCK Drain Plate (CB and EMPI 8 bolt sumps). These feature a drain plug hole as well as threaded holes to RETAIN THE FACTORY OIL SCREEN! Adding a stock strainer screen and oil drain plug to the use of THESE deep sumps is a huge improvement to these sumps!Available in 4 anodized finishes; Satin, Black, Red, and Blue. This item does NOT come with a drain plug, that must be purchased separately!
|
|
|
|
|
|
|
|
|
|
Fast Fab Tachometer Bracket, 1953-1957 Beetles (Ovals)
|
|
|
These high quality tachometer brackets are made in. Designed to fit your oval windows dash perfectly and give that "old school" Cal-look that the traditional enthusiast loves. Bracket is sold in raw finish and includes all hardware and wiring grommet.
|
|
|
|
|
|
|
|
|
|
Fast Fab Deck Lid Stand Off, 1958-1963 Beetle
|
|
|
For years these were home made, and they always worked well, but usually didn't turn out too pretty!This product holds the bottom of the decklid latched about 3" OPEN, secure but allowing cool air into your hot engine compartment! CNC machined aluminum, is designed to prop open the bottom of 1958-1963 decklids. Includes allen screws to fasten to your car. Designed to keep your carb linkage, dual carbs, throttle bodies or air cleaners from contacting your decklid, but it's best purpose is improved airflow & cooling to the engine compartment. This Stand-off will prop open the bottom of your decklid by about 3".
|
|
|
|
|
|
|
|
|
|
Fast FabTachometer Bracket, 1965-1977 Beetle with Defrost Vent (No Drilling)
|
|
|
Made in USA. This is the perfect way to add a tach to your 1965-1977 VW bug without cutting the dash up! This bracket bolts into the center defroster vent and positions the tach just right. Parts include all hardware and are sold in raw alloy finish.
|
|
|
|
|
|
|
|
|
|
Fast Fab Billet Aluminum Full Flow Oil Pump Cover, Made in USA
|
|
|
Precision machined billet aluminum VW oil pump cover offers top quality & looks to boot! Full flow outlet is drilled/tapped to a standard 3/8" NPT ,and is shorter in design for more pulley and tin clearance! Design for all 8mm stud cases.Matches all other Fast Fab anodized products too! MADE IN USA!
|
|
|
|
|
|
|
|
|
|
Fast Fab BIllet Aluminum Oil Cooler Block Off Plate
|
|
|
Made in USA. This CNC machined oil cooler block off plate is machined from 6061 aluminum, anodized and laser etched for long lasting good looks. Includes stainless steel hardware too!
These work great for anyone looking to eliminate the stock cooler and use a remote cooling system. Set you motor off with this great product!
NOTE: This block off does NOT come with the seals or gasket used for installation! You must use the oil cooler gasket (NOT STOCK SEALS) referenced in the Related Items field.
|
|
|
|
|
|
|
|
|
|
Dual Speaker Mounting Panel, Bay Window Bus (1968-79), EACH, 2168-69128
|
|
|
Dual Speaker Mounting Panel, Bay Window Bus (1968-79), EACH, 2168-69128 includes the mounting bracket ONLY! The speakers and attaching hardware are not included. This product is designed to enhance the sound provided by your modern stereo system allowing you to hook up TWO 3.5" speakers. Speakers with lower profiles work better!
|
|
|
|
|
|
|
|
|
|
Fast Fab Fuel Tank Hold Down Clamps, Bolts, and Washers, Set of 4, Made in USA
|
|
|
Fast Fab Fuel Tank Hold Down Clamps, Bolts, and Washers, Set of 4, Made in USA. Made from billet aluminum, matches all other Fast Fab products! Available in Satin, Black, Red, and Blue! Really sets off the detail in your trunk!
|
|
|
|
|
|
|
|
|
|
Fast Fab Oil Drain Plate (Engine Sump Plate)
|
|
|
Made in USA. This CNC machined sump cover. Made from billet aluminum with anodized finish and laser etched logo for long lasting good looks. This cover won't warp or bend. Great sealing surface and a very clean look to complete the look. Matches all the other Fast Fab anodized aluminum products! This Sump Plate fits Stock VW Cases, and deep sumps that use a stock drain plate (Berg, Bugpack, SCAT, etc).
|
|
|
|
|
|
|
|
|
|
Fast Fab Dashboard Repair Section, Ghia 1956-1965
|
|
|
This Made in USA Dashboard Repair Section fits 1956-1965 VW Ghias, it's a perfect reproduction to the original! Factory Radio Block Off Panels fit perfect (as expected). This needs to be welded into place and properly finished for the best job.
|
|
|
|
|
|
|
|
|
|
Fast Fab Brake Push Rod Clevis, 1953-1957 Beetle
|
|
|
This Brake Push Rod Clevis fits 1953-1957 Split and Oval Window VW Beetle hydraulic pedal assemblies. This piece is commonly lost when people tear the car apart for restoration, then thrown away thinking it was to something else!
|
|
|
|
|
|
|
|
|
|
Fast Fab Dash Repair Section, Beetle 1958-1967
|
|
|
Fast Fab has perfected a really nice panel to restore your 1958-1967 (metal dashboard) VW Bug's mangled/cut dash opening to factory specifications. This part should be welded and properly finished for optimal results!
|
|
|
|
|
|
|
|
|
|
Fast Fab Radio Delete Plate, 1958-1967 Beetle
|
|
|
Fast Fab makes these 1958-1967 Beetle Radio Delete plates in the USA. They have succeeded in making a really nice part that will fit your cars dash opening just like the factory part, without having to search all over for this needle in a haystack!
|
|
|
|
|
|
|
|
|
|
Fast Fab Degreed Distributor Clamp, Made in USA
|
|
|
Made in USA. This CNC machined Distributor Clamp. Made from billet aluminum, Set it up once an then adjust your timing with ease. Set you motor off with this great product!
ACN ALERT! We have received numerous reports that users can experience ignition "issues" with the use of anodized or painted distributor clamps. So now we strongly recommend that when installing a part like this, that you sand THROUGH the anodizing on the clamp in 2 locations; where the clamp grabs the distributor, and where the clamp contacts the case (Where it's invisible when installed).
This ensures that the distributors electrical connections (grounding) are intact, and that it will work properly! No misfires due to a lack of distributor ground!
|
|
|
|
|
|
|
|
|
|
Fast Fab 1949-1967 Bus Stainless Steel Window Latch Plate Set
|
|
|
Does your 1949-1967 VW bus have rusty scratched latch plates? Not anymore! These reproduction window latch plates are made from high grade stainless steel that can be polished or brush finished and never rust or look ruined ever again! It's laser cut and bent from .045" stainless steel IN THE USA . One set does both sides.
|
|
|
|
|
|
|
|
|
|
Fast Fab Radio Delete Plate, Bus 1967
|
|
|
This reproduction Radio Delete Plate fits 1967 VW Busses, it's so close to the impossibe to find originals it's difficult to discern them! But this high quality product is made in the USA (not China).
|
|
|
|
|
|
|
|
|
|
Fast Fab Oil Filter Header Mount
|
|
|
This 6061 Billet Aluminum bracket is designed for exhaust stud mounting of all 3-bolt remote oil filter adapters. Perfect for Baja's or Sandrails! This part allows you to keep the filter mounted to the engine, so you do not have to remove the lines or filter when R&Ring the engine!This is an Off-road or racing part only! The other shops and stores selling this don't know (and won't tell you) that THIS PART WILL NOT FIT SEDANS, THE FILTER WILL NOT CLEAR THE BODYWORK! MADE IN USA!
|
|
|
|
|
|
|
|
|
|
Fast Fab Fuel Pump Block Off With Breather
|
|
|
Beautiful CNC Machined Billet Aluminum VW Fuel Pump Block Off Plate, threaded to 3/8" NPT for routing to your turbo drain or a breather box inlet/outlet. This matches all other Anodized Fast Fab products! We recommend that you use Curil-T or Curil-K to seal it to the engine case. "Gaskets" in this application bleed oil and will need continual cleaning.
|
|
|
|
|
|
|
|
|
|
|
Fast Fab Alloy Oil Drain Nut, 14 x 1.5mm
|
|
|
Fast Fab Alloy Oil Drain Nut, 14 x 1.5mm is an anodized Alloy Drain Nut to match Fast Fab's beautiful oil drain plates, since some people don't want to use a gnarly old nut on that billet plate! Available in 4 anodized color finishes.
|
|
|
|
|
|
|
|
|
|
Fast Fab License Plate Mounting Bracket, Beetle 1958-1963
|
|
|
Fast Fab's License Plate Mounting Bracket fits 1958-1963 VW Beetles. It is laser cut and CNC bent from .080" thick steel IN THE USA It fits your car just like the dealer parts did when it was new! We have tried to make one of these because it was missing on our cars, WHAT A HEADACHE! It's worth the $20 for a new one!
|
|
|
|
|
|
|
|
|
|
Fast Fab Fuel Pump Block Off, Smooth
|
|
|
Beautiful CNC Machined Billet Aluminum VW Fuel Pump Block Off Plate, smooth version for a clean engine! This matches all other Anodized Fast Fab products! This block off does NOT come with a gasket! We recommend that you use Curil-T or Curil-K to seal it to the engine case. "Gaskets" in this application bleed oil and will need continual cleaning.
|
|
|
|
|
|
|
|
|
|
Fast Fab Pedal Stop Plate, 1953-1957 Beetle, 1750-57008
|
|
|
Fast Fab Pedal Stop Plate, 1953-1957 Beetle, 1750-57008 fits 1953-1957 Split and Oval VW Beetles as good as the factory part did! This is made to OEM German specification IN THE USA, with all the attention to detail you expect for a 60yo car! This part must be used along with PN 1750-57007.
|
|
|
|
|
|
|
|
|
|
Fast Fab Pedal Support Bracket, 1953-1957 Beetle, 1750-57007
|
|
|
Fast Fab Pedal Support Bracket, 1953-1957 Beetle, 1750-57007 fits all oval and split window VW Bug pedal assemblies. It's made in the USA to German VW Factory specifications for the best quality product. This part must be used with PN 1750-57008.
|
|
|
|
|
|
|
|
|
|
Fast Fab Polished Door Handle and Window Winder Bezel (Escutcheon), EACH
|
|
|
CNC machined from billet aluminum these bezels (Escutcheons) will really set off your VW Beetle or Ghia!. These are made to look factory made, but are brightly polished for an incredible appearance! Price per EACH.
|
|
|
|
|
|
|
|
|
|
AN Fitting, Male, Aluminum, Weld-On - 10 AN, 5100-00085
|
|
|
AN Fitting, Male, Aluminum, Weld-On - 10 AN, 5100-00085 is placed into a hole you drill, then you weld or braze it into place. This allows you to connect a -10 Hose End to the fitting to the bung, for a leak-free and reusable connection.
|
|
|
|
|
|
|
|
|
|
Fast Fab Dash Knob - Early Cars with 5mm Shafts, Polished
|
|
|
These CNC knobs fit 5mm VW shafts, and are machined from billet aluminum. These knobs REALLY set off your custom dash. They are made to look just like the factory design but brightly polished for a clean custom look.
|
|
|
|
|
|
|
|
|
|
AN Fitting STEEL, Male, Weld-On, -10 AN
|
|
|
This steel bung is placed into a hole you drill, then you weld or braze it into place. This allows you to connect a -10 Hose End to the fitting to the bung, for a leak-free and reusable connection.
|
|
|
|
|
|
|
|
|
|
|
AN Fitting, Male, Aluminum, Weld-On - 8 AN, 5100-00084
|
|
|
AN Fitting, Male, Aluminum, Weld-On - 8 AN, 5100-00084 is placed into a hole you drill, then you weld or braze it into place. This allows you to connect a -8 Hose End to the fitting to the bung, for a leak-free and reusable connection.
|
|
|
|
|
|
|
|
|
|
|
Polished Aluminum Turn Signal Switch End, 5100-00081, per EACH
|
|
|
Billet Aluminum Turn Signal Switch End finishes a normally "boring" part on the interior of your VW Bug or Ghia.
|
|
|
|
