|
|
|
|
|
|
Bugpack Extreme Off-Road Racing Collector ONLY, 1 5/8" Tubing, Downswept Exit (45 Degree Down), 2050-22
|
|
|
Bugpack Extreme Off-Road Racing Collector ONLY, 1 5/8" Tubing, Downswept Exit (45 Degree Down), 2050-22 is a replacement collector for the 1 1/2" Tubing Extreme Off Road Header. Spring attachment system minimizes fatigue and breakage! The spring attachment system connectes the merged collector to individual port pipes "firmly", but not so stiff that they vibrate, fatigue, then break! This absorbs vibration commonly found during those brutal off-road races, eliminating common exhaust breakage. MADE IN THE USA!
|
|
|
|
|
|
|
|
|
|
|
Bugpack Extreme Off-Road Racing Collector ONLY, 1 1/2" Tubing, Downswept Exit (45 Degree Down), 2052-22
|
|
|
Bugpack Extreme Off-Road Racing Collector ONLY, 1 1/2" Tubing, Downswept Exit (45 Degree Down), 2052-22 is a replacement collector for the 1 1/2" Tubing Extreme Off Road Header. Spring attachment system minimizes fatigue and breakage! The spring attachment system connectes the merged collector to individual port pipes "firmly", but not so stiff that they vibrate, fatigue, then break! This absorbs vibration commonly found during those brutal off-road races, eliminating common exhaust breakage. MADE IN THE USA!
|
|
|
|
|
|
|
|
|
|
2 Bolt Collector Flange, LARGE
|
|
|
These flanges are needed when you are building or repairing an exhaust system. This one fits the Baja Header Flange (2-bolt).
|
|
|
|
|
|
|
|
|
|
Heater Box Replacement Pipes (J-pipes), Type 3 (PAIR)
|
|
|
Heater Box Replacement Pipes (J-pipes), Type 3. These are used when removing your stock heater boxes off your Squareback, Fastback, or Notchback, and replace them with a light and inexpensive J-pipe. Price is for a pair to do both sides on your engine
|
|
|
|
|
|
|
|
|
|
Fiberous Heat Rise Gaskets, PAIR
|
|
|
These precision die cut gaskets are made from a fibrous heat resistant material for long life. This is for a pair of gaskets to do one engine.
|
|
|
|
|
|
|
|
|
|
Small Flange Muffler/Stinger Gaskets, PAIR, 2518
|
|
|
Small Flange Muffler/Stinger Gaskets, PAIR, 2518 are manufactured from heat resistant materials for long life. They are precision die cut for your exhaust. Good budget exhaust gaskets when you can't afford copper. Set of 2 so you have a spare!
|
|
|
|
|
|
|
|
|
|
Baja 2 Bolt Header/Muffler Gaskets, Set of 2
|
|
|
These fit the 2 bolt flange Baja systems. These gaskets are manufactured from heat resistant materials for long life. They are precision die cut for your exhaust. Good budget exhaust gaskets when you can't afford copper. Set of 2 so you have a spare! Fits 2055-10, 2056-10, 2524, 2527, and 2528.
|
|
|
|
|
|
|
|
|
|
Slanted Tail Pipe Set, Baffled, PAIR
|
|
|
Slanted Tail Pipe Set, Baffled, Pair replace your stock pea-shooters with an angled tip and perforated baffle. Finished with a Slash Cut end, these tips give a deep, mellow sound to your stock muffler compared to OEM Whistle pea-shooters. Price is for a pair to do one car
|
|
|
|
|
|
|
|
|
|
Muffler Insert for 2030 4 Pipe Exhaust, EACH
|
|
|
Use this insert in each of your 2030 4 Pipe Exhaust outlets to quiet that beast down when you need to!
|
|
|
|
|
|
|
|
|
|
Dual Quiet Pack Muffler, Type 3
|
|
|
Dual Quiet Pack Muffler fits the 2033-10 header, it's shaped correctly for installation on the VW Squareback, VW Notchback, and VW Fastback when using Bugpack's Type 3 exhaust header. Dual Quietpacks give a balanced "look" to the rear of the car, instead of being lopsided. And they are less restrictive than single QPs.
|
|
|
|
|
|
|
|
|
|
Stinger Brace Kit, Chrome
|
|
|
This kit will help prevent you from losing stingers and baffles on off road systems that are brutal to these components. Another level of protection for your baby!
|
|
|
|
|
|
|
|
|
|
Replacement Spring Kit for Off Road Racing Headers, Set of 4
|
|
|
These HD Springs keep the collector on, with a little bit (just enough!) of wiggle that prevents metal fatigue and the resultant header cracks that rigid systems exhibit. Set of 4 springs to do one header.
|
|
|
|
|
|
|
|
|
|
Bugpack Extreme Muffler Kit for 1 1/2" Header, Includes Flanged Collector and Flanged Muffler, Fits 1 1/2" Extreme Headers, 2581-11
|
|
|
Bugpack Extreme Muffler Kit for 1 1/2" Header, Includes Flanged Collector and Flanged Muffler, Fits 1 1/2" Extreme Headers, 2581-11 allows you to swap between straight pipe stinger, and muffler, depending on your mood (and your neighbors!). This product includes the flanged muffler AND the matching flanged collector, to fit together on the Extreme Header. You will be able to swap quickly between LOUD and quiet, depending on your mood!
|
|
|
|
|
|
|
|
|
|
|
Bugpack Extreme Muffler Kit for 1 5/8" Header, Includes Flanged Collector and Flanged Muffler, Fits 1 5/8" Extreme Headers, 2581-12
|
|
|
Bugpack Extreme Muffler Kit for 1 5/8" Header, Includes Flanged Collector and Flanged Muffler, Fits 1 5/8" Extreme Headers, 2581-12 allows you to swap between straight pipe stinger, and muffler, depending on your mood (and your neighbors!). This product includes the flanged muffler AND the matching flanged collector, to fit together on the Extreme Header. You will be able to swap quickly between LOUD and quiet, depending on your mood!
|
|
|
|
|
|
|
|
|
|
Bugpack Extreme Weld-On Muffler Kit, Includes Flanged Muffler and Extra Flange, 2581-21
|
|
|
Bugpack Extreme Weld-On Muffler Kit, Includes Flanged Muffler and Extra Flange, 2581-21 converts your Bobcat Style Exhaust to one with a flange, so you can run a stinger, OR the supplied muffler! Don't forget a stinger! Supplied flange must be welded to your existing header.
|
|
|
|
|
|
|
|
|
|
12mm Nut (8mm Thread), 12 Pieces
|
|
|
Nuts that use a 12mm wrench yet still fit on the 8mm stud, give you more working room! While not as nice as our 3/8" x 8mm nuts, these are great (and cheap!) for mild engines that need just a LITTLE extra room! 12 nuts will do both intakes, and all 4 exhaust ports!
|
|
|
|
|
|
|
|
|
|
Thick Exhaust Flange, Set of 4 (Choose Size)
|
|
|
THICK VW Exhaust flanges are used to make your own exhaust, or to fix one that is messed up (Usually with thin warped flanges). Thick flanges hold the gasket tighter, and prevent warping from compressible exhaust gaskets and tight nuts.Price is for 4 flanges.
|
|
|
|
|
|
|
|
|
|
Oxygen Sensor Adapter Pipe, Small 3 Bolt Flange
|
|
|
This slick adapter bolts between the muffler and header, and has an O2 bung welded in the side. This is designed for TEMPORARY use for engine tuning. By using this part you can tune many different cars without welding an O2 bung into each one. This adapter is 2 1/4" long from flange to flange, has a 1 1/2" ID Pipe (that will need weld cleanup if you want it perfect), and uses the VW Industry standard small bolt flange of 2 5/16" Center to Center bolt spacing.This part does NOT come with any exhaust flange gaskets, you will need 2 good ones to make sure it doesn't leak! If it leaks, you'll get "False Lean" readings on your O2 Gauge!
|
|
|
|
|
|
|
|
|
|
Muffler, 1962-65 Type 1, 40hp with Fresh Air, 111-251-051HEU
|
|
|
Muffler, 1962-65 Type 1, 40hp with Fresh Air, 111-251-051HEU is the stock muffler for Beetles and Ghias with the Fresh Air 40hp equipped engine. This is of European manufacture, we never EVER sell Brazilian exhaust parts if we can help it!
|
|
|
|
|
|
|
|
|
|
Doughnut Gasket (Exhaust Seal Ring), 13-1600cc Engines, 111-251-241A
|
Price: $3.95
SALE ITEM! use code TOOMANY30
|
|
|
Doughnut Gasket (Exhaust Seal Ring), 13-1600cc Engines, 111-251-241A is great when the ONLY thing wrong with your muffler kit is the cheesy doughnut rings blew out! These are high quality, not like those Brazilian or Chinese pieces of junk!
|
|
|
|
|
|
|
|
|
|
Exhaust Flange Gasket, 40hp-1600cc, EACH 111-251-261B
|
Price: $0.80
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Exhaust Flange Gasket, 40hp-1600cc, 111-251-261B fits all 40hp and newer T1 based engines, and also waterboxer engines. These are 3 piece gaskets, 2 thin pieces of metal sandwiching a fibrous layer. Nice to have in the toolbox for exhaust blowouts!
|
|
|
|
|
|
|
|
|
|
Muffler Installation Kit, GERMAN, 1963-73 Type 1, 1960-67 Type 2, 111-298-009A
|
|
|
Muffler Installation Kit, GERMAN, 1963-73 Type 1, 1960-67 Type 2, 111-298-009A will properly install the 1964-74 stock muffler on your beetle, super beetle, ghia, or bus. We STRONGLY recommend the German kits, that have bulletproof metal-woven doughnut gaskets; Brazilian ones don't! Does not fit Bug/Super Beetle dual heat riser Calif 1974 Models. DOES fit 1974 EGR single preheat models, but does not come with an EGR Gasket.his is NOT the correct kit to put a bus muffler on, that kit is 211-298-009A (The clamps use 1 bolt instead of 2, to clear the mustache bar), but a lot of guys still use this kit on their 1968-71 busses. One of these will install one muffler.
|
|
|
|
|
|
|
|
|
|
Muffler Installation Kit, BRAZILIAN, 1963-73 Type 1, 1960-67 Type 2, 111-298-009ABR
|
|
|
Muffler Installation Kit, BRAZILIAN, 1963-73 Type 1, 1960-67 Type 2, 111-298-009ABR will allow you to install the 1964-74 stock muffler on your beetle, super beetle, ghia, or bus. We STRONGLY recommend the German kits, that have bulletproof metal-woven doughnut gaskets; Brazilian ones don't, but we offer this kit for you guys that are pinching pennies!Does not fit Bug/Super Beetle dual heat riser Calif 1974 Models. DOES fit 1974 EGR single preheat models, but does not come with an EGR Gasket.This is NOT the correct kit to put a bus muffler on, that kit is 211-298-009A (The clamps use 1 bolt instead of 2, to clear the mustache bar), but a lot of guys still use this kit on their 1968-71 busses. One of these will install one muffler.
|
|
|
|
|
|
|
|
|
|
Tail Pipe Clamp Kit (Pea-Shooter Clamp Kit), 1956-74 Type 1, 111-298-051
|
|
|
Tail Pipe Clamp Kit (Pea-Shooter Clamp Kit), 1956-74 Type 1, 111-298-051 are the finest we can get! The included doughnut gaskets are woven METAL, which ends the self destruction of the crappy fibrous ones that come in the econo kits!
|
|
|
|
|
|
|
|
|
|
Muffler, EUROPEAN, 1966-71 Type 1, LH Pre-heater, 113-251-053AK
|
|
|
Muffler, European, 1966-71 Type 1, LH Preheater, 113-251-053AK is factory equipment on 1966-71 Beetles, Super Beetles, and Ghias. This muffler has the pre-heater on the Left Hand Side of it, and it will interfere with Filter-Pump Oil Pumps. If you have a 1966-71 model and need to clear a filter pump, or are thinking of getting one on the future, get a RH Preheater model, which will bolt on and work fine, AND will be compatible with a filter-pump in the future should you decide to do that.We always carry the finest quality muffler available, not the Brazilian and Chinese ones that rust out in under a year's time! These are European, and the actual country of origin can and does change. Sometimes it's German, sometimes it's Danish, or another quality European manufacture.
|
|
|
|
|
|
|
|
|
|
Chrome Pea Shooter (Tail Pipe) per EACH, 250mm Long, 1967-73 Type 1, 113-251-163C
|
|
|
Chrome Pea Shooter (Tail Pipe), 250mm Long, 1967-73 Type 1, 113-251-163C extend the exhaust out away from the body and bumper of your car, to prevent soot from depositing on them. They are also mufflers, resulting in the distinctive "FWEEM" sound on VWs. These are sold per EACH, you need 2 to do one muffler.This fits all T1 Stock mufflers from 1955-74, but the lengths are different. This one is "correct" for 1967-73 models, but the differences are minor.
|
|
|
|
|
|
|
|
|
|
Chrome Pea Shooter (Tail Pipe) per EACH, 265mm Long, 1955-67 Type 1, 113-251-163D
|
|
|
Chrome Pea Shooter (Tail Pipe), 265mm Long, 1955-67 Type 1, 113-251-163D extend the exhaust out away from the body and bumper of your car, to prevent soot from depositing on them. They are also mufflers, resulting in the distinctive "FWEEM" sound on VWs. These are sold per EACH, you need 2 to do one muffler.This fits all T1 Stock mufflers from 1955-74, but the lengths are different. This one is "correct" for 1955-67 models, but the differences are minor.
|
|
|
|
|
|
|
|
|
|
|
Chrome Pea Shooter (Tail Pipe) per EACH, 225mm, for 1974 and later Type 1, 113-251-163F/G
|
|
|
T-1 74 On
|
|
|
|
|
|
|
|
|
|
Preheater to Muffler Gasket (Preheater Gasket), Large Hole, 1963-74 Type 1, 1960-71 Type 2, 113-251-263 per EACH
|
Price: $0.75
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Preheater to Muffler Gasket (Preheater Gasket), Large Hole, 1963-74 Type 1, 1960-71 Type 2, 113-251-263 is the gasket that goes between the preheat flange on the muffler on upright engines, and the preheat pipe on the intake manifold. 2 are needed to do one engine.Having a couple spares is a wise idea. Price is for one gasket.
|
|
|
|
|
|
|
|
|
|
Muffler to Heater Hose Connector Pipe, EACH, 113-255-165
|
|
|
Muffler to Heater Hose Connector Pipe, Each, 113-255-165 connects the muffler pre-heater on the #2 and 4 muffler primary tubes to the heater hose, when using a stock muffler. Without this there is no easy way to connect your heater hoses up!
|
|
|
|
|
|
|
|
|
|
Muffler to Heater Box Air Clamp, Left or Right, EACH, 113-255-341A
|
|
|
Muffler to Heater Box Air Clamp, Left or Right, Each, 113-255-341A connects the heater box to the stock muffler pre-heater on the #2 and 4 muffler primary tubes. This is often missing, and a leak here means a massive loss of heat! 2 needed per car, there is one for each heater box.
|
|
|
|
|
|
|
|
|
|
|
Exhaust Damper Pipe, 1960-71 Type 2, 147-251-157
|
|
|
Exhaust Damper Pipe, 1960-71 Type 2, 147-251-157 routes the exhaust from the muffler's exhaust outlet, turns sideways, while providing additional noise dampening. Don't forget the Damper Mounting Bracket, and the Tail Pipe!
|
|
|
|
|
|
|
|
|
|
Tail Pipe, 1963-71 Type 2 with Upright 1500 and 1600cc Engine, 211-251-237B
|
Price: $16.95
SALE ITEM! use code TOOMANY30
|
|
|
Tail Pipe, 1963-71 Type 2 with Upright 1500 and 1600cc Engine, 211-251-237B is the final outlet for the exhaust, routing the noise and fumes away and clear from the bus body. If this is missing the exhaust is much louder!
|
|
|
|
|
|
|
|
|
|
Muffler Install Kit, GERMAN, 1968-71 Type 2, 211-298-009A
|
|
|
Muffler Kit, GERMAN, 1968-71 Type 2, 211-298-009A will properly install the stock muffler or header on your VW bus. We STRONGLY recommend the German kits, that have bulletproof metal-woven doughnut gaskets; Brazilian ones don't!One of these will install one muffler. This kit has a wrap around style clamp to clear the mustache bar on the 1968-71 VW Bus with the upright engine and rear engine hanger (Mustache Bar), the beetle style kits are very difficult to install due to interference, which is not the case with this kit.
|
|
|
|
|
|
|
|
|
|
Tail Pipe and Damper Mounting Kit, 1960-71 Type 2, 211-298-055
|
|
|
Tail Pipe and Damper Mounting Kit, 1960-71 Type 2, 211-298-055 is the kit required to mount both the Tail Pipe and the Damper. It includes clamps and gaskets from the muffler OUT.
|
|
|
|
|
|
|
|
|
|
Hex Bolt, 8 X 1.25 X 35mm, Full Thread, Class 8.8, EACH, N102473
|
|
|
Hex Bolt, 8 X 1.25 X 35mm, Full Thread, Class 8.8, EACH, N102473 can be used for applications like bolting exhaust flanges together. They are a little longer than most bolts you have lying around, so will aid with flanges that "aren't cooperating". Nice to have in the garage!
|
|
|
|
|
|
|
|
|
|
|
Hex Nut, 8 X 1.25mm, EACH, N110082 (or N110088)
|
Price: $0.15
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Hex Nut, 8 X 1.25mm, EACH, N110082 are the most commonly used nut on your VW! They are used all over the place, engine and elsewhere. It's a good ideal to have a lot of these lying around for those times you'll need them!
|
|
|
|
|
|
|
|
|
|
Lock Washer, 10mm, EACH, N120102
|
Price: $0.30
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Lock Washer, 10mm, EACH, N120102
|
|
|
|
|
|
|
|
|
|
8 x 1.25 x 38mm Stud, Non-Threaded Middle, EACH, N144438
|
Price: $2.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
8 x 1.25 x 38mm Stud, Non-Threaded Middle, EACH, N144438 is typically used on exhaust studs, intake manifold studs, oil pumps, and mechanical fuel pump mounting. Weber intakes too! You can use the "double nut" technique to remove and install OR grab the non-threaded middle! Price is for one stud.
|
|
|
|
|
|
|
|
|
|
|
GlassPack Muffler for 2086-10 (72-74 & 80-83 Header)
|
|
|
Single Glass mufflers has a distinctive, louder than stock tone, with great ground clearance and performance. This Single Glass Pack is compatible with the 2086-10 header, but has been discontinued. This is the last one we have!
|
|
|
|
|
|
|
|
|
|
Plastic Heater Hoses, Upright Engines, PAIR
|
|
|
Plastic Heater Hoses, Upright Engines, Pair, are fantastically good looking and durable black plastic heater hoses that run from your fan shroud outlets to your heater boxes, or your pre-heaters on your stock muffler.
|
|
|
|
|
|
|
|
|
|
Muffler, 1975-79 Non-California Fuel Injected Type 1, 043-251-051B
|
|
|
Muffler, 1975-79 Non-California Fuel Injected Type 1, 043-251-051B is a difficult to find 1975-79 Fuel Injected VW Beetle or Super Beetle muffler. This has 2 inlets and 1 exhaust which exits the stock rear apron cutout.
|
|
|
|
|
|
|
|
|
|
Muffler, 1975-79 California Fuel Injected Type 1, 043-251-051C
|
|
|
Muffler, 1975-79 California Fuel Injected Type 1, 043-251-051C is a difficult to find 1975-79 Fuel Injected VW Beetle or Super Beetle muffler, with a single inlet and single outlet.
|
|
|
|
|
|
|
|
|
|
Tail Pipe, 1975-79 Non-California Fuel Injected Type 1, 043-251-187B
|
|
|
Tail Pipe, 1975-79 Non-California Fuel Injected Type 1, 043-251-187B is a difficult to find 1975-79 Fuel Injected VW Beetle or Super Beetle Tail Pipe.
|
|
|
|
|
|
|
|
|
|
Tail Pipe Installation Kit, 43mm 1975-79 Non-California Fuel Injected Type 1, 070-298-051
|
|
|
Tail Pipe Installation Kit, 43mm 1975-79 Non-California Fuel Injected Type 1, 070-298-051 is a difficult to find 1975-79 Fuel Injected VW Beetle or Super Beetle Tail Pipe installation kit.
|
|
|
|
|
|
|
|
|
|
Vintage Speed Adjustable Flange Heater Style Muffler Gasket and Stud Kit, 155-052-ADJGASKET
|
|
|
Vintage Speed Adjustable Flange Heater Style Muffler Gasket and Stud Kit, 155-052-ADJGASKET is the required gaskets, bolts, studs, washers, and nuts to seal and re-seal the ADJUSTABLE Heater Style Mufflers on Type 1 Engines for various engine widths.
|
|
|
|
|
|
|
|
|
|
Vintage Speed Stainless Steel 38mm (1 1/2") J-pipes (Includes Flange Adapters) for Type 1 Engine, FLANGED, PAIR, 155-200-038FG
|
|
|
Vintage Speed Stainless Steel 38mm (1 1/2") J-pipes (Includes Flange Adapters) for Type 1 Engine, FLANGED, Pair, 155-200-038FG is the highest quality set of J-pipes you can get for upright VW engines. This is the Flanged version for a leak resistant connection! Never ever rust or corrode again!
These J-pipes ONLY fit exhausts using a stock heater box location, such as the Vintage Speed exhausts, stock mufflers, Tri-Mil systems, Bugpack Street Headers, etc. These do NOT fit alternate J-pipe locations like A-1 fully merged or sidewinder headers, etc.
|
|
|
|
|
|
|
|
|
|
Vintage Speed Stainless Steel Sport Muffler (Up to 125hp) for 1300-1600cc Based Type 1 Engine in 1956-74 Beetle, Super Beetle, and Ghia, 155-203-05200
|
|
|
Vintage Speed Stainless Steel Sport Muffler (Up to 125hp) for 1300-1600cc Based Type 1 Engine in 1956-74 Beetle, Super Beetle, and Ghia, 155-203-05200 is the finest "Pea Shooter" exhaust available for your VW Beetle or Ghia! This model exits the pea shooters like stock, in the stock Rear Apron Cutouts on 1955+ carbureted models! This is a 1 1/2" (38mm) exhaust system, which is a HUGE upgrade from the stock 1 1/4" (32mm) system.
|
|
|
|
|
|
|
|
|
|
|
Vintage Speed Stainless Steel Super Flow Muffler (Up to 150hp) for Type 1 Engine in 1966-74 Beetle, Super Beetle, and Ghia, 155-203-052SF
|
|
|
Vintage Speed Stainless Steel Super Flow Muffler (Up to 150hp) for Type 1 Engine in 1966-74 Beetle, Super Beetle, and Ghia, 155-203-052SF is the finest "Pea Shooter" exhaust available for your VW Beetle or Ghia! This model exits the pea shooters like stock, in the stock Rear Apron Cutouts on 1955+ carbureted models! This is a 1 1/2" (38mm) exhaust system, which is a HUGE upgrade from the stock 1 1/4" (32mm) system. 150hp model is louder but better flowing than 125hp version.
|
|
|
|
|
|
|
|
|
|
Vintage Speed Stainless Steel Sport Muffler (Up to 125hp) for Type 1 Engine in 1949-79 Beetle, Super Beetle, and Ghia (BELOW APRON), 155-203-05100
|
|
|
Vintage Speed Stainless Steel Sport Muffler (Up to 125hp) for Type 1 Engine in 1949-79 Beetle, Super Beetle, and Ghia (BELOW APRON), 155-203-05100 is the finest Twin Tip exhaust available for your VW Beetle or Ghia, exiting BELOW the rear apron. This is a 1 1/2" (38mm) exhaust system, which is a HUGE upgrade from the stock 1 1/4" (32mm) system.
|
|
|
|
