OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Suspension - Rear > Vanagon 1980-92 > Axle Bearings & Seals, etc
8 products found
Sort By:
1
Rear Axle Seal, Fits Inner or Outer, 1968-92 Type 2 (Bus and Vanagon), 211-501-317
Rear Axle Seal, Fits Inner or Outer, 1968-92 Type 2 (Bus and Vanagon), 211-501-317
Price: $5.95

Rear Axle Seal, Fits Inner or Outer, 1968-92 Type 2 (Bus and Vanagon), 211-501-317 is used in 2 locations, both inner and outer axle bearing seal in the rear diagonal arm. You must remove the stub axle to change the inner, do this when you are doing CVs! more info
46mm Socket for Bus & Vanagon Axle Nuts, 5769
46mm Socket for Bus & Vanagon Axle Nuts, 5769
Price: $14.95

This 3/4" drive 46mm Socket can be used to remove stubborn VW Bus and Vanagon 46mm axle nuts. High Quality tool for repeated use. more info
46mm Axle Nut Removal/Installation Tool
46mm Axle Nut Removal/Installation Tool
Price: $15.95

These "Bang" type axle nut removal/installation tools are NOT the preferred method to remove/install the axle nut since they hammer the rear wheel bearing, but they work good enough in the field to get you home! more info
Wheel Bearing (Axle Bearing), Rear Outer, 1971-92 Type 2 (Bus and Vanagon), 211-501-283D
Wheel Bearing (Axle Bearing), Rear Outer, 1971-92 Type 2 (Bus and Vanagon), 211-501-283D
Price: $21.95

Wheel Bearing (Axle Bearing), Rear Outer, 1971-92 Type 2 (Bus and Vanagon), 211-501-283D is a single bearing in the diagonal arm. You load this with good quality wheel bearing grease. There is also a seal at either end of the diagonal arm! more info
Wheel Bearing (Axle Bearing), Rear Inner, 1968-92 Type 2 (Bus and Vanagon), 211-501-287
Wheel Bearing (Axle Bearing), Rear Inner, 1968-92 Type 2 (Bus and Vanagon), 211-501-287
Price: $21.95

Wheel Bearing (Axle Bearing), Rear Inner, 1968-92 Type 2 (Bus and Vanagon), 211-501-287 is a single bearing in the diagonal arm. You load this with good quality wheel bearing grease. There is also a seal at either end of the diagonal arm! more info
Axle & Gland Nut Leverage Tool (Buddy Bar)
Axle & Gland Nut Leverage Tool (Buddy Bar)
Price: $39.95

This tool is used to hold 200 and 180mm flywheels AND 4 or 5 lug brake drums from turning when tightening/loosening. Doesn't risk case breakage (the case ears) like a standard flywheel lock. This is a great tool to have around the garage for the do-it-yourselfer. This tool eliminates the need for an assistant when tightening or loosening rear axle nuts, or the flywheel gland nut. This tool is strong enough to withstand over 2x the recommended torque spec. Bolt pattern fits both 180 and 200mm flywheels, AND both 4 lug and 5 lug brake drums! Also fits 5 x 130mm Small-5 Bus & Vanagon Brake Drums! more info
Wheel Bearing (Axle Bearing), Rear Outer, 1964-70 Type 2, 211-501-283
Wheel Bearing (Axle Bearing), Rear Outer, 1964-70 Type 2, 211-501-283
Price: $59.95

Wheel Bearing (Axle Bearing), Rear Outer, 1964-70 Type 2, 211-501-283 is a single bearing nearest the wheel (outside). You load this with good quality wheel bearing grease for IRS, but NOT with Swing Axle, since the redux box is full of gear lube! 1968-70 uses wheel bearing grease and 2 grease seals (inside and outside). more info
Flywheel and Brake Drum Torque Tool Kit, 36mm Gland Nut and Axle Nuts
Flywheel and Brake Drum Torque Tool Kit, 36mm Gland Nut and Axle Nuts
Price: $109.95

Flywheel and Brake Drum Torque Tool Kit, 36mm Gland Nut and Axle Nuts is used to tighten and loosen the flywheel gland nut, and 36mm Axle Nuts at the brake drum! This was initially introduced under the "Torque-meister" brand name years ago. Mechanical advantage (leverage) makes seemingly impossibly tight nuts come off WITH EASE! Accurate too! This is a great tool to have around the garage for the do-it-yourselfer. This tool eliminates the need for an assistant when tightening or loosening rear axle nuts, or the flywheel gland nut. If you've ever used this, you realize it's a MUST in the garage of the Vee-Dubber!

This tool comes with 2 pinion gears, for both 6V/180mm flywheels, AND 12V/200mm flywheels!

 more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.