OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Suspension - Rear > Vanagon 1980-92
37 products found
SUBCATEGORIES:
Axle Bearings & Seals, etc Brake Drum & Axle Nut
CV Joint & Boot Kits Rubber Grommets & Snubbers
Shocks Swaybars
Sort By:
1
CV Bolt Serrated Lock Washer, 8mm, Fits All Aircooled CV Joints, EACH
CV Bolt Serrated Lock Washer, 8mm, Fits All Aircooled CV Joints, EACH
Price: $0.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

CV Bolt Serrated Lock Washer, 8mm, Fits All Aircooled CV Joints, EACH go between the CV Joint Bolt Head, and the Torque Distribution Washer (plate). The serrations prevent the CV joint from backing off! We recommend you torque the bolts to 33lb/ft! more info
CV Joint Bolt, Type 1, 2, and 3, 12pt Triple Square, EACH, 113-598-229
CV Joint Bolt, Type 1, 2, and 3, 12pt Triple Square, EACH, 113-598-229
Price: $1.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

CV Joint Bolt, Type 1, 2, and 3, 12pt Triple Square, EACH, 113-598-229 is a replacement CV Bolt that you may have snapped off, or more likely stripped the ID of trying to get it out! We strongly recommend you use the CV Bolt tool AND grab the bolt head with Vice-Grips! more info
CV Joint Bolt, Type 1, 2, and 3, 6pt Allen, EACH, 113-598-229D
CV Joint Bolt, Type 1, 2, and 3, 6pt Allen, EACH, 113-598-229D
Price: $1.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

CV Joint Bolt, Type 1, 2, and 3, 6pt Allen, EACH, 113-598-229D is a replacement CV Bolt that you may have snapped off, or more likely stripped the ID of trying to get it out! We strongly recommend you use an Allen Wrench or Allen Socket, AND grab the bolt head with Vice-Grips! The 6pt Allen bolts were usually used on Type 2s, while the 12pt Triple Square were used on the Type 1s and 3s. more info
CV Joint Torque Distribution Washer, THING and Type 2 (100mm CV Joints with 60mm Hole Spacing), EACH, 211-501-357
CV Joint Torque Distribution Washer, THING and Type 2 (100mm CV Joints with 60mm Hole Spacing), EACH, 211-501-357
Price: $1.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

CV Joint Torque Distribution Washer, THING and Type 2 (100mm CV Joints with 60mm Hole Spacing), EACH, 211-501-357 spreads the load from the CV Joint Bolt across the flange of the CV Joint Boot. 3 of these go between the bolt(s) and the CV Joint on each CV Joint! more info
CV Joint Flange Grease Cap, 1968-92 VW Type 2, and VW Type 4, EACH (Need 2), 002-517-289A
CV Joint Flange Grease Cap, 1968-92 VW Type 2, and VW Type 4, EACH (Need 2), 002-517-289A
Price: $4.95

CV Joint Flange Grease Cap, 1968-92 VW Type 2, and VW Type 4, EACH (Need 2), 002-517-289A are the cap that taps into the CV Flange that is the output of the transmission. These should be replaced if the flange is removed, they are not reusable. You need 2 of these to do one transmission. more info
CV Joint Grease, 3oz Packet, EACH
CV Joint Grease, 3oz Packet
Price: $4.95

CV Joint Grease, 3oz Packet, EACH is specifically made for CV Joints. CV Grease has Molybdenum Disulfide in it, and it "flows" a certain way at the temperatures that CV Joints operate at, and this keeps the wear areas properly protected. The "Drop Point" of CV Grease is around 380F, which is too low for wheel bearings, but this low temperature allows it to flow well inside the CV Joint!

You want to put a lot of grease in the CV Joint and CV Boot. Not so much that the CV Boot bulges, because if you overfill it will eventually expand and leak. But you do want a lot of grease on the boot side of the joint, which prevents the grease inside of the joint from pushing out as the joint flexes. One boot will typically need between 3 to 4 oz.

IMPORTANT: CV Grease is heavy in metals, IE: Lead, Molybdenum, graphite, etc. You absolutely should ALWAYS wear gloves, and don't let the grease contact your skin! more info
Rear Axle Seal, Fits Inner or Outer, 1968-92 Type 2 (Bus and Vanagon), 211-501-317
Rear Axle Seal, Fits Inner or Outer, 1968-92 Type 2 (Bus and Vanagon), 211-501-317
Price: $5.95

Rear Axle Seal, Fits Inner or Outer, 1968-92 Type 2 (Bus and Vanagon), 211-501-317 is used in 2 locations, both inner and outer axle bearing seal in the rear diagonal arm. You must remove the stub axle to change the inner, do this when you are doing CVs! more info
6 Point CV Joint Allen Socket, 3/8" Drive, 7057-11
6 Point CV Joint Allen Socket, 3/8" Drive, 7057-11
Price: $6.95

6 Point CV Joint Allen Socket, 3/8" Drive, 7057-11 is WAY easier to use than bent allen keys! 6 pt is standard Allen design! We recommend cleaning out the CV Bolt head, then TAP THIS IN with a hammer. Then you can connect the ratchet and extension. Super-Tight bolts can be aided by grabbing the OD of the bolt with 10" Vice-Grips, and turn the Vice-Grips AND ratchet AT THE SAME TIME to crack it loose. Never fails! more info
Final Drive Seal, 1976-92 Type 2 (091 Transmission), 091-301-189A
Final Drive Seal, 1976-92 Type 2 (091 Transmission), 091-301-189A
Price: $6.95

Final Drive Seal, 1976-92 Type 2 (091 Transmission), 091-301-189A is the seat between the transmission case, and seals the shaft of the output shaft. These often leak, and the leak can mimic a CV Joint Boot failure! IF the axles are off, replace these! more info
12 Point CV Joint Allen Socket, 3/8" Drive
12 Point CV Joint Allen Socket, 3/8" Drive, 00-5796-0
Price: $7.95

12 Point CV Joint Allen Socket, 3/8" Drive, 00-5796-0 is WAY easier to use than bent allen keys! 12 pt design really grips without stripping! We recommend cleaning out the CV Bolt head, then TAP THIS IN with a hammer. Then you can connect the ratchet and extension. Super-Tight bolts can be aided by grabbing the OD of the bolt with 10" Vice-Grips, and turn the Vice-Grips AND ratchet AT THE SAME TIME to crack it loose. Never fails! more info
CV Joint Bolt, 3/8 x 24 x 1 3/4", 12pt Head, Set of 6, 16-2412-0
CV Joint Bolt, 3/8 x 24 x 1 3/4", 12pt Head, Set of 6, 16-2412-0
Price: $9.95

CV Joint Bolt, 3/8 x 24 x 1 3/4", 12pt Head, Set of 6, 16-2412-0 are used to fit 3/8 drilled stub axles or axle flanges. The 12pt head is much easier to loosen and tighten without the risk of stripping like internally "grabbed" CV Joint Bolts are! You also don't need to carry around a "special" CV Joint socket if you use these! more info
CV Joint Bolt, 3/8 x 24 x 1 3/4", Allen Head, Set of 6, 16-2410-0
CV Joint Bolt, 3/8 x 24 x 1 3/4", Allen Head, Set of 6, 16-2410-0
Price: $9.95

CV Joint Bolt, 3/8 x 24 x 1 3/4", Allen Head, Set of 6, 16-2410-0 are used to fit 3/8 drilled stub axles or axle flanges. requires a 6pt allen wrench to install or remove. These are hardened bolts, very strong and durable! more info
46mm Socket for Bus & Vanagon Axle Nuts, 5769
46mm Socket for Bus & Vanagon Axle Nuts, 5769
Price: $14.95

This 3/4" drive 46mm Socket can be used to remove stubborn VW Bus and Vanagon 46mm axle nuts. High Quality tool for repeated use. more info
46mm Axle Nut Removal/Installation Tool
46mm Axle Nut Removal/Installation Tool
Price: $15.95

These "Bang" type axle nut removal/installation tools are NOT the preferred method to remove/install the axle nut since they hammer the rear wheel bearing, but they work good enough in the field to get you home! more info
CV Joint Axle Boot Kit, 1968-92 Type 2 Rear, IRS THING Rear, and 1968-74 Type 4, EUROPEAN, 251-598-201
CV Joint Axle BOOT KIT (EUROPEAN), 1968-92 Type 2 Rear, IRS THING Rear, and 1968-74 Type 4, 251-598-201
Price: $15.95

CV Joint Axle Boot Kit, 1968-92 Type 2 Rear, IRS THING Rear, and 1968-74 Type 4, EUROPEAN, 251-598-201 are the best quality CV Axle Boots we can get! Changing these is such a miserable job, you ONLY want to do this once! Kit includes Axle Boot, CV Grease, and new CV Bolts. This kit fits IRS THINGs, and also 1968 and newer Busses, and 2WD Vanagons. It also fits the rear of Syncro Vanagons, and the VW 411 and 412!

 more info
Wheel Bearing (Axle Bearing), Rear Outer, 1971-92 Type 2 (Bus and Vanagon), 211-501-283D
Wheel Bearing (Axle Bearing), Rear Outer, 1971-92 Type 2 (Bus and Vanagon), 211-501-283D
Price: $21.95

Wheel Bearing (Axle Bearing), Rear Outer, 1971-92 Type 2 (Bus and Vanagon), 211-501-283D is a single bearing in the diagonal arm. You load this with good quality wheel bearing grease. There is also a seal at either end of the diagonal arm! more info
Wheel Bearing (Axle Bearing), Rear Inner, 1968-92 Type 2 (Bus and Vanagon), 211-501-287
Wheel Bearing (Axle Bearing), Rear Inner, 1968-92 Type 2 (Bus and Vanagon), 211-501-287
Price: $21.95

Wheel Bearing (Axle Bearing), Rear Inner, 1968-92 Type 2 (Bus and Vanagon), 211-501-287 is a single bearing in the diagonal arm. You load this with good quality wheel bearing grease. There is also a seal at either end of the diagonal arm! more info
CV Joint Axle BOOT KIT (GERMAN), 1968-92 Type 2 Rear, IRS THING Rear, and 1968-74 Type 4, 251-598-201GR
CV Joint Axle BOOT KIT (GERMAN), 1968-92 Type 2 Rear, IRS THING Rear, and 1968-74 Type 4, 251-598-201GR
Price: $29.95

CV Joint Axle BOOT KIT (GERMAN), 1968-92 Type 2 Rear, IRS THING Rear, and 1968-74 Type 4, 251-598-201GR are the best quality CV Axle Boots we can get! Changing these is such a miserable job, you ONLY want to do this once! Kit includes Axle Boot, CV Grease, and new CV Bolts. This kit fits IRS THINGs, and also 1968 and newer Busses, and 2WD Vanagons. It also fits the rear of Syncro Vanagons, and the VW 411 and 412!

 more info
Axle & Gland Nut Leverage Tool (Buddy Bar)
Axle & Gland Nut Leverage Tool (Buddy Bar)
Price: $39.95

This tool is used to hold 200 and 180mm flywheels AND 4 or 5 lug brake drums from turning when tightening/loosening. Doesn't risk case breakage (the case ears) like a standard flywheel lock. This is a great tool to have around the garage for the do-it-yourselfer. This tool eliminates the need for an assistant when tightening or loosening rear axle nuts, or the flywheel gland nut. This tool is strong enough to withstand over 2x the recommended torque spec. Bolt pattern fits both 180 and 200mm flywheels, AND both 4 lug and 5 lug brake drums! Also fits 5 x 130mm Small-5 Bus & Vanagon Brake Drums! more info
CV Joint and Boot Kit (ECONO KIT), 1968+ IRS Type 2 (1968-1992 Type 2) and VW THING, 251-598-101EC
CV Joint and Boot Kit (ECONO KIT), 1968+ IRS Type 2 (1968-1992 Type 2) and VW THING, 251-598-101EC
Price: $49.95

CV Joint and Boot Kit (ECONO KIT), 1968+ IRS Type 2 (1968-1992 Type 2) and VW THING, 251-598-101EC is a decent quality Economy branded joint kit for guys that are on a shoestring budget!

These joints fit 1968+ Type 2s (Busses and Vanagons), and IRS VW Things.

 more info
CV Joint Bolt, 8 x 1.25 x 45mm, LOCKING, Type 1, 2, and 3, 8mm 12pt Head, Set of 12 (Does one axle), 8320
CV Joint Bolt, 8 x 1.25 x 45mm, LOCKING, Type 1, 2, and 3, 8mm 12pt Head, Set of 12 (Does one axle), 8320
Price: $49.95

CV Joint Bolt, 8 x 1.25 x 45mm, LOCKING, Type 1, 2, and 3, 8mm 12pt Head, Set of 12 (Does one axle), 8320 is an incredible product to prevent CV Bolt loosening, which is a common and messy problem! Instead of thread locker, have a true locking fastener! 12pt head is small and gives you a lot of room for the socket, and there is a large flange beneath the head to spread the clamping load. Once the bolts are tight, you simply slip on the locking tab into a location to prevent the bolt from any loosening, then secure it with the included snap ring (small tipped snap ring pliars will be needed).

There is no longer any chance of the bolt loosening or coming off, which can be a major hassle on the road or out on the dunes! This is also a fantastic product for off road cars, where the constant pounding knocks CV Joint Bolts loose regularly!

We sell these in packs of 12 units, which will do 2 CV Joints (One Axle Shaft, both ends). You'll need 2 of these to do one car.

 more info
Wheel Bearing (Axle Bearing), Rear Outer, 1964-70 Type 2, 211-501-283
Wheel Bearing (Axle Bearing), Rear Outer, 1964-70 Type 2, 211-501-283
Price: $59.95

Wheel Bearing (Axle Bearing), Rear Outer, 1964-70 Type 2, 211-501-283 is a single bearing nearest the wheel (outside). You load this with good quality wheel bearing grease for IRS, but NOT with Swing Axle, since the redux box is full of gear lube! 1968-70 uses wheel bearing grease and 2 grease seals (inside and outside). more info
Rear Shock Absorber, 1980-92 Vanagon, 251-513-031FBR
Rear Shock Absorber, 1980-92 Vanagon, 251-513-031FBR
Price: $64.95

Rear Shock Absorber, 1980-92 Vanagon, 251-513-031FBR is an excellent quality shock for the money. We prefer non-gas shocks for the front of VWs because these ride SO much better than gas shocks do! more info
Coil Spring Compressor Tool Rental, KTC-A1047
Coil Spring Compressor Tool Rental Fee, KTC-A1047
Rental Fee $65.00
$500 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)

Coil Spring Compressor Tool Rental, KTC-A1047 is THE easiest and safest way to remove and install coil springs on your VW Super Beetle, Vanagon, or even other makes! Includes 110, 120, and 130mm Jaws to do most models of car, including Macpherson struts! The rental period for this kit is: ONE MONTH. Please note that the core charge/replacement cost for this kit is $500.00, so be sure to return it on time! more info
CV Joint and Boot Kit, Front Inner (EUROPEAN), 1986-91 Vanagon Syncro, 251-498-103A
CV Joint and Boot Kit, Front Inner (EUROPEAN), 1986-91 Vanagon Syncro, 251-498-103A
Price: $84.95

CV Joint and Boot Kit, Front Inner (EUROPEAN), 1986-91 Vanagon Syncro, 251-498-103A are usually GKN/Lobro brand CV Joints. We do NOT recommend non-German CV joints, nor rebuilt CV Joints nor rebuilt CV Axle Assemblies, the defect rate is too high for this messy job, and the job IS a bear so you do not want to repeat it! more info
CV Joint and Boot Kit, 1968+ IRS Type 2 (1968-1992 Type 2) and VW THING, EUROPEAN, 251-598-101
CV Joint and Boot Kit (EUROPEAN), 1968+ IRS Type 2 (1968-1992 Type 2) and VW THING, 251-598-101
Price: $89.95

CV Joint and Boot Kit, 1968+ IRS Type 2 (1968-1992 Type 2) and VW THING, EUROPEAN, 251-598-101 are the best quality currently available. These joints fit 1968+ Type 2s (Busses and Vanagons), but also fit the VW THING with IRS Rear!

 more info
CV Joint and Boot Kit, 1986-91 Vanagon Syncro, Front Outer CV Joint, EACH (Does one outer joint only), ECONOMY, 251-498-099E
CV Joint and Boot Kit, 1986-91 Vanagon Syncro, Front Outer CV Joint, EACH (Does one outer joint only), ECONOMY, 251-498-099E
Price: $99.95

CV Joint and Boot Kit, 1986-91 Vanagon Syncro, Front Outer CV Joint, EACH (Does one outer joint only), ECONOMY, 251-498-099E is what you use to retain your factory axles, on more of a budget than the European made CVs! more info
Flywheel and Brake Drum Torque Tool Kit, 36mm Gland Nut and Axle Nuts
Flywheel and Brake Drum Torque Tool Kit, 36mm Gland Nut and Axle Nuts
Price: $109.95

Flywheel and Brake Drum Torque Tool Kit, 36mm Gland Nut and Axle Nuts is used to tighten and loosen the flywheel gland nut, and 36mm Axle Nuts at the brake drum! This was initially introduced under the "Torque-meister" brand name years ago. Mechanical advantage (leverage) makes seemingly impossibly tight nuts come off WITH EASE! Accurate too! This is a great tool to have around the garage for the do-it-yourselfer. This tool eliminates the need for an assistant when tightening or loosening rear axle nuts, or the flywheel gland nut. If you've ever used this, you realize it's a MUST in the garage of the Vee-Dubber!

This tool comes with 2 pinion gears, for both 6V/180mm flywheels, AND 12V/200mm flywheels!

 more info
Front Outer Boot Kit for ALL Syncro Vanagons (with clamp and hardware) 251-203A
Front Outer Boot Kit for ALL Syncro Vanagons (with clamp and hardware) 251-203A
Price: $109.95

more info
EMPI Axle Assembly (CV Joint Half Shaft), Front Left OR Right, 1986-91 Vanagon Syncro, EACH (Does one side only), 80-7000
EMPI Axle Assembly (CV Joint Half Shaft), Front Left OR Right, 1986-91 Vanagon Syncro, EACH (Does one side only), 80-7000
Price: $119.95

EMPI Axle Assembly (CV Joint Half Shaft), Front Left OR Right, 1986-91 Vanagon Syncro, EACH (Does one side only), 80-7000 is a complete assembly for you guys that have to get on the road FAST! These are not as good as you rebuilding with German parts! We always recommend buying German CVs and Boots, and rebuilding your original axles, but we do understand the need sometimes to do a R&R to get on the road, where time is critical! These are great for that purpose. more info
IRS Axle Assembly (CV Joint Half Shaft), 1980-82 Type 2 w/Automatic Transmission, LEFT Side (EACH), 90-6800
IRS Axle Assembly (CV Joint Half Shaft), 1980-82 Type 2 w/Automatic Transmission, LEFT Side (EACH), 90-6800
Price: $119.95

IRS Axle Assembly (CV Joint Half Shaft), 1980-82 Type 2 w/Automatic Transmission, LEFT Side (EACH), 90-6800 is a brand new Hardened Steel Axle, 2 CV Joints, and 2 CV Boots ready to install! Far nicer than the messy rebuilding of your current unit!

Price is for one unit to do one SIDE, you need 2 do to a whole car. These are NOT as high a quality as you would get if you were to buy new German CVs and CV Boots, but it's far easier and less mess! These are a good choice for you to put into your car to keep your bus on the road, while you PROPERLY rebuild the original axle assemblies with good German parts! more info
IRS Axle Assembly (CV Joint Half Shaft), 1980-82 Type 2 w/Automatic Transmission, RIGHT Side (EACH), 90-6801
IRS Axle Assembly (CV Joint Half Shaft), 1980-82 Type 2 w/Automatic Transmission, RIGHT Side (EACH), 90-6801
Price: $119.95

IRS Axle Assembly (CV Joint Half Shaft), 1980-82 Type 2 w/Automatic Transmission, RIGHT Side (EACH), 90-6801 is a brand new Hardened Steel Axle, 2 CV Joints, and 2 CV Boots ready to install! Far nicer than the messy rebuilding of your current unit!

Price is for one unit to do one SIDE, you need 2 do to a whole car. These are NOT as high a quality as you would get if you were to buy new German CVs and CV Boots, but it's far easier and less mess! These are a good choice for you to put into your car to keep your bus on the road, while you PROPERLY rebuild the original axle assemblies with good German parts! more info
IRS Axle Assembly (CV Joint Half Shaft), 1983-91 Type 2 w/Std Transmission (ALSO FITS SYNCRO REAR!), Fits Left or Right Side (EACH), 90-6805
IRS Axle Assembly (CV Joint Half Shaft), 1983-91 Type 2 w/Std Transmission (ALSO FITS SYNCRO REAR!), Fits Left or Right Side (EACH), 90-6805
Price: $119.95

IRS Axle Assembly (CV Joint Half Shaft), 1983-91 Type 2 w/Std Transmission (ALSO FITS SYNCRO REAR!), Fits Left or Right Side (EACH), 90-6805 is a brand new Hardened Steel Axle, 2 CV Joints, and 2 CV Boots ready to install! Far nicer than the messy rebuilding of your current unit!

Price is for one unit to do one SIDE, you need 2 do to a whole car. These are NOT as high a quality as you would get if you were to buy new German CVs and CV Boots, but it's far easier and less mess! These are a good choice for you to put into your car to keep your bus on the road, while you PROPERLY rebuild the original axle assemblies with good German parts! more info
IRS Axle Assembly (CV Joint Half Shaft), 1983-92 Type 2 w/Automatic Transmission, LEFT Side (EACH), 90-6804
IRS Axle Assembly (CV Joint Half Shaft), 1983-92 Type 2 w/Automatic Transmission, LEFT Side (EACH), 90-6804
Price: $119.95

IRS Axle Assembly (CV Joint Half Shaft), 1983-92 Type 2 w/Automatic Transmission, LEFT Side (EACH), 90-6804 is a brand new Hardened Steel Axle, 2 CV Joints, and 2 CV Boots ready to install! Far nicer than the messy rebuilding of your current unit!

Price is for one unit to do one SIDE, you need 2 do to a whole car. These are NOT as high a quality as you would get if you were to buy new German CVs and CV Boots, but it's far easier and less mess! These are a good choice for you to put into your car to keep your bus on the road, while you PROPERLY rebuild the original axle assemblies with good German parts! more info
IRS Axle Assembly (CV Joint Half Shaft), 1983-92 Type 2 w/Automatic Transmission, RIGHT Side (EACH), 90-6803
IRS Axle Assembly (CV Joint Half Shaft), 1983-92 Type 2 w/Automatic Transmission, RIGHT Side (EACH), 90-6803
Price: $119.95

IRS Axle Assembly (CV Joint Half Shaft), 1983-92 Type 2 w/Automatic Transmission, RIGHT Side (EACH), 90-6803 is a brand new Hardened Steel Axle, 2 CV Joints, and 2 CV Boots ready to install! Far nicer than the messy rebuilding of your current unit!

Price is for one unit to do one SIDE, you need 2 do to a whole car. These are NOT as high a quality as you would get if you were to buy new German CVs and CV Boots, but it's far easier and less mess! These are a good choice for you to put into your car to keep your bus on the road, while you PROPERLY rebuild the original axle assemblies with good German parts! more info
Front Outer Boot with Clamps for Syncro Vanagon 251-203F
Front Outer Boot with Clamps for Syncro Vanagon 251-203F
Price: $134.95

more info
CV Joint and Boot Kit, 1986-91 Vanagon Syncro, Front Outer CV Joint, EACH (Does one outer joint only), EUROPEAN, 251-498-099E
CV Joint and Boot Kit, 1986-91 Vanagon Syncro, Front Outer CV Joint, EACH (Does one outer joint only), EUROPEAN, 251-498-099E
Price: $159.95

CV Joint and Boot Kit, 1986-91 Vanagon Syncro, Front Outer CV Joint, EACH (Does one outer joint only), EUROPEAN, 251-498-099E is what you use to retain your factory axles, instead of using the "Economy" Half Shafts which have Chinese parts! High quality! more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.