|
|
|
|
|
|
Valve Adjustment Sticker, Fits on Fan Shroud, 1969+ Beetle, Super Beetle, Ghia, THING, 1968-71 Bus, and 1968-73 Type 3, Gray Background with Red Ink
|
Price: $3.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Valve Adjustment Sticker, Goes on Fan Shroud, 1969+ Beetle, Super Beetle, Ghia, THING, 1968-71 Bus, and 1968-73 Type 3, Gray Background with Red Ink is usually missing!
|
|
|
|
|
|
|
|
|
|
Stock Valve Spring (per EACH), 1200-1600cc Engines, 113-109-623C
|
|
|
Stock Valve Spring, 1200-1600cc Engines, 113-109-623C are high quality stock valve springs that work great for RPMs up to 4500. Over that and you should get HD Springs. Original springs are likely completely soft and worn out, and risk breakage!
|
|
|
|
|
|
|
|
|
|
Valvespring Shims, Single Springs, Set of 8
|
|
|
Hardened Valve Spring Shims are used to set proper spring height and tension. These provide an excellent seat surface for springs, preventing them from digging into the soft aluminum of the head. Each kit includes 8 shims.
|
|
|
|
|
|
|
|
|
|
HD Single Valve Spring, SINGLE SPRING
|
|
|
HD Single Valve Spring, SINGLE is for you guys who have a broken HD spring, and don't want to buy a complete set! You can simply swap the single broke spring, and be back on the road!
|
|
|
|
|
|
|
|
|
|
Valvespring Shims, Dual Springs, Set of 8
|
|
|
Hardened Valve Spring Shims are used to set proper spring height and tension. These provide an excellent seat surface for springs, preventing them from digging into the soft aluminum of the head. Each kit includes 8 shims.
|
|
|
|
|
|
|
|
|
|
|
Valve Spring, Type 4 Engines (Fit Both Solid and Hydraulic Lifters), EACH, 021-109-623K
|
|
|
Valve Spring, Type 4 Engines (Fit Both Solid and Hydraulic Lifters), EACH, 021-109-623K are high quality stock valve springs to replace the stockers that have lost a lot of tension over all those miles! Original springs are likely to be completely soft and worn out, and risk breakage!
|
|
|
|
|
|
|
|
|
|
Valvespring Shim Kit, Dual Springs, 20 Pieces
|
|
|
Hardened Valve Spring Shims are used to set proper spring height and tension. These provide an excellent seat surface for springs, preventing them from digging into the soft aluminum of the head. This kit includes (8) .015", (8) .030", and (4) .060".
|
|
|
|
|
|
|
|
|
|
Valvespring Shim Kit, Single Springs, 20 Pieces
|
|
|
Hardened Valve Spring Shims are used to set proper spring height and tension. These provide an excellent seat surface for springs, preventing them from digging into the soft aluminum of the head. This kit includes (8) .015", (8) .030", and (4) .060".
|
|
|
|
|
|
|
|
|
|
SCAT HD Single Valve Springs, Set of 8, 20011
|
|
|
SCAT HD Single Valve Springs, Set of 8, 20011 are a good choice for mild engines. These are typically used with Chromoly or Titanium Retainers, and work great with cams up to 280 Adv Duration, and limited to 6000 RPMs. A growing trend with VWs is to use LIGHT components, and lighter springs. A common combination is Titanium retainers, and these HD Single springs, for valve control without excessive oil temps associated with high spring pressures.
|
|
|
|
|
|
|
|
|
|
Dual Valve Spring Guide Boss Cutting Tool Rental Fee
|
Rental Fee $30.00
$100 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
|
|
Dual Valve Spring Guide Boss Cutting Tool Rental is a tool designed to cut down the valve guide bosses to make room for the inner springs on dual valve springs. You can use this in a drill press, mill, or even a hand drill if you are careful. Just make your cut so the valve spring surface is flat, then be sure to use a DUAL valve spring shim beneath the springs to protect the head from the ends of your valve springs. We include a 9mm shaft so you can also use this cutter on FI Type 1 and Type 4 exhaust guides!
One side of this tool cuts the boss for the inner spring on dual springs, the other side of it is used to trim the top of the valve guide down for more clearance to the retainer. If there is less than .060" clearance between the guide and retainer at full lift, you can bend push rods!
|
|
|
|
|
|
|
|
|
|
|
HD Single Valve Springs, Set of 8
|
|
|
These HD Single Springs are OUTSTANDING for mild engines. These are typically used with Chromoly or Titanium Retainers, and work great with cams up to 280 Adv Duration, and limited to 6000 RPMs.
A growing trend with VWs is to use LIGHT components, and lighter springs. A common combination is Titanium retainers, and these HD Single springs, for valve control without excessive oil temps associated with high spring pressures.
|
|
|
|
|
|
|
|
|
|
Bench Mount Head Assembly Tool, 00-5742-0
|
|
|
Bench Mount Head Assembly Tool, 00-5742-0 makes the disassembly and assembly of your cylinder heads are piece of cake! Sure beats fighting valve springs with wonky compressors! Leverage makes the job EASY!
|
|
|
|
|
|
|
|
|
|
Dual Hi-Performance Valve Springs, Regular, Set of 8 Duals
|
|
|
Dual Valve Springs, Regular, Set of 8 are good for RPMs up to about 7K. Will lift to .550". Installed height is 1.550", 150lbs seat pressure, and 300lbs open at .550" lift. Spring OD is 1.260", and ID is .690". Spring wire diameter is .162". Excellent VW beetle valvespring.
|
|
|
|
|
|
|
|
|
|
Racing Dual Valve Springs, Set of 8
|
|
|
These VW Springs will lift to .630". Installed height is 1.550", 165lbs seat pressure, and 370lbs open at .575" lift. Spring OD is 1.260", and ID is .690". Spring wire diameter is .156". Better steel and heat treat is why the smaller wire is stiffer!
|
|
|
|
|
|
|
|
|
|
Chevy Valve Springs (1 3/8"/K-800), Set of 8
|
|
|
Matched set of 8; designed for LONGER than stock valves to retain proper spring tension. Will lift to .550". Installed height is 1.750", 175lbs seat pressure, and 450lbs open at .750" lift. IMPORTANT: You need .200" longer then stock valves to use these!
|
|
|
|
|
|
|
|
|
|
HD Single Valvespring Kit w/Chromoly Retainers, (8) Springs, (8) Retainers, (16) Keepers
|
|
|
HD Single Valvespring Kit w/Chromoly Retainers, (8) Springs, (8) Retainers, (16) Keepers will upgrade your VW's valve train with this kit! HD Single Valvesprings, Chromoly Retainers, and Hardened Keepers, in a kit that saves you $ over buying the components separately!
|
|
|
|
|
|
|
|
|
|
Heavy Duty Valve Spring Removal Tool (Valve Spring Compressor), Type 4 Based Engines, Purchase
|
|
|
Heavy Duty Valve Spring Removal Tool (Valve Spring Compressor), Type 4 Based Engines, Purchase is a professional grade tool which allows you to remove the valve springs from a TYPE 4 Engine WITHOUT engine dis-assembly or removal! Capable of removing stock or HD valve springs, without removing the engine (Engine still in the car!). This can really save your bacon! This tool comes with the Rocker Shaft and Leverage Tool. This newest version of this tool is machined for a 3/8" Square drive, so you use your ratchet as the "Lever" to compress the spring, and to get the optimal angle to compress and hold the spring while you work.
|
|
|
|
|
|
|
|
|
|
Performance Dual Valvespring Kit w/Chromoly Retainers
|
|
|
Upgrade your VW's valvetrain with this kit! Dual Valvesprings, Chromoly Retainers, and Hardened Keepers, in a kit that saves you $ over buying the components separately!
|
|
|
|
|
|
|
|
|
|
Racing Dual Valvespring Kit w/Chromoly Retainers
|
|
|
Upgrade your VW's valvetrain with this kit! HD Racing Dual Valvesprings, Chromoly Retainers, and Hardened Keepers, in a kit that saves you $ over buying the components separately!
|
|
|
|
|
|
|
|
|
|
Heavy Duty Valve Spring Removal Tool (Valve Spring Compressor), Type 1 Based Engines, Purchase
|
|
|
Heavy Duty Valve Spring Removal Tool (Valve Spring Compressor), Type 1 Based Engines, Purchase is a professional grade tool which allows you to remove the valve springs WITHOUT engine dis-assembly or removal! Capable of removing stock or HD valve springs, without removing the engine (Engine still in the car!). This can really save your bacon! This tool comes with the Rocker Shaft, Leverage Tool, and either a 12 or 14mm (you choose the size) Spark Plug insert (to pressurize with air). The new version of this tool is machined for a 3/8" Square drive, so you use your ratchet as the "Lever" to compress the spring, and to get the optimal angle to compress and hold the spring while you work.
When ordering, select the plug thread size you have to receive the proper air chuck adapter for your heads. If you have multiple sets of heads (or are a tool "Junkie"), then get both 12 and 14mm for a small surcharge.
|
|
|
|
