|
|
|
|
|
|
Window Rubber Removal Tool (Window Rubber Cutter), N-008
|
|
|
Window Rubber Removal Tool (Window Rubber Cutter), N-008 is used to cut the window rubber, so you can remove the glass without breaking or scratching it! Simply cut parallel to the glass into the rubber, then peel out the outside portion. Then the glass lifts out!
|
|
|
|
|
|
|
|
|
|
Window Rubber Installation Tool, Window Rubber Peeling and Pulling, N-003
|
|
|
Window Rubber Installation Tool, Window Rubber Peeling and Pulling, N-003 is great for the final tweaking of the rubber, after you have done the initial window installation. The blunt end of this tool allows you to pull on the rubber without ripping it. You just slip this behind the rubber, and then slide it along the body to pull the rubber out further on any sections that the rope didn't fully do. Makes quick work of the finishing of the window and window rubber installation!
Remember to lubricate the groove in the window rubber with some liquid dish soap, it's very slippery and cleans up easily with water after you are done!
Note that tool PNs
N-003
N-004
N-005
are all the same tools, but with slightly different shapes to access a little differently.
|
|
|
|
|
|
|
|
|
|
Window Rubber Installation Tool, Window Rubber Peeling and Pulling, N-004
|
|
|
Window Rubber Installation Tool, Window Rubber Peeling and Pulling, N-004 is great for the final tweaking of the rubber, after you have done the initial window installation. The blunt end of this tool allows you to pull on the rubber without ripping it. You just slip this behind the rubber, and then slide it along the body to pull the rubber out further on any sections that the rope didn't fully do. Makes quick work of the finishing of the window and window rubber installation!
Remember to lubricate the groove in the window rubber with some liquid dish soap, it's very slippery and cleans up easily with water after you are done!
Note that tool PNs
N-003
N-004
N-005
are all the same tools, but with slightly different shapes to access a little differently.
|
|
|
|
|
|
|
|
|
|
Window Rubber Installation Tool, Window Rubber Peeling and Pulling, N-005
|
|
|
Window Rubber Installation Tool, Window Rubber Peeling and Pulling, N-005 is great for the final tweaking of the rubber, after you have done the initial window installation. The blunt end of this tool allows you to pull on the rubber without ripping it. You just slip this behind the rubber, and then slide it along the body to pull the rubber out further on any sections that the rope didn't fully do. Makes quick work of the finishing of the window and window rubber installation!
Remember to lubricate the groove in the window rubber with some liquid dish soap, it's very slippery and cleans up easily with water after you are done!
Note that tool PNs
N-003
N-004
N-005
are all the same tools, but with slightly different shapes to access a little differently.
|
|
|
|
|
|
|
|
|
|
Window Rubber Removal Tool (Window Rubber Cutter) SET OF 2, N-007
|
|
|
Window Rubber Removal Tool (Window Rubber Cutter) SET OF 2, N-007 is used to cut the window rubber, so you can remove the glass without breaking or scratching it! Simply cut parallel to the glass into the rubber, then peel out the outside portion. Then the glass lifts out!
|
|
|
|
|
|
|
|
|
|
Window Rubber Installation Tool, 9 meter Rope With Grab Handle, N-002
|
|
|
Window Rubber Installation Tool, 9m Rope With Grab Handle, N-002 is a great tool for window installation! Put the rubber on the glass, then slide the rope from this tool into the rubber's groove, as you pull the rope the rubber lifts the rubber over the lip, without tearing the rubber. Be sure to pull the rope in toward the center of the glass, pulling parallel to the glass itself. This technique minimizes pressure on the rubber, and the chance of tearing the rubber is much lower than pulling perpendicular to the glass.
Normally pulling on the rope can be a challenge, but the integrated handle of this tool makes that a breeze!
|
|
|
|
|
|
|
|
|
|
|
Window Rubber Installation Tool, 6 meter Rope With Grab Handle, N-001
|
|
|
Window Rubber Installation Tool, 6 meter Rope With Grab Handle, N-001 is a great tool for window installation! Put the rubber on the glass, then slide the rope from this tool into the rubber's groove, as you pull the rope the rubber lifts the rubber over the lip, without tearing the rubber. Be sure to pull the rope in toward the center of the glass, pulling parallel to the glass itself. This technique minimizes pressure on the rubber, and the chance of tearing the rubber is much lower than pulling perpendicular to the glass.
Normally pulling on the rope can be a challenge, but the integrated handle of this tool makes that a breeze!
|
|
|
|
|
|
|
|
|
|
Bugpack Cal-Look Rear Window Rubber, 1953-57 Beetle Sedan, 62" Long
|
|
|
Bugpack makes some of the finest window rubber period! It's made in the USA in their own facility. This piece fits the 1953-57 Oval Beetle Sedan Rear WindowWe have some of this window rubber on a car that's been parked outside for over 20 years, and the rubber still looks new! It fits and installs easily, without hardening or cracking, even many years later.
|
|
|
|
|
|
|
|
|
|
|
Bugpack Cal-Look Rear Window Rubber, Split Rear Windows, Beetle Sedan, PAIR
|
|
|
Bugpack makes some of the finest window rubber period! It's made in the USA in their own facility. This piece fits the Split Rear Window in the Beetle Sedan.We have some of this window rubber on a car that's been parked outside for over 20 years, and the rubber still looks new! It fits and installs easily, without hardening or cracking, even many years later.
|
|
|
|
|
|
|
|
|
|
|
Bugpack Cal-Look Windshield Rubber, 1953-57 Beetle Sedan, 98" Long
|
|
|
Bugpack makes some of the finest window rubber period! It's made in the USA in their own facility. This piece fits the 1953-57 Oval Beetle Sedan WindshieldWe have some of this window rubber on a car that's been parked outside for over 20 years, and the rubber still looks new! It fits and installs easily, without hardening or cracking, even many years later.
|
|
|
|
|
|
|
|
|
|
Bugpack Cal-Look Window Rubber Kit (4 Pieces), 1953-57 Beetle Sedan
|
|
|
Bugpack Cal-Look Window Rubber Kit (4 Pieces), 1953-57 Beetle Sedan. Bugpack makes some of the finest window rubber period! It's made in the USA in their own facility. We have some of this window rubber on a car that's been parked outside for over 20 years, and the rubber still looks new! It fits and installs easily, without hardening or cracking, even many years later.
|
|
|
|
|
|
|
|
|
|
Bugpack Cal-Look Window Rubber Kit (4 Pieces), 1965-71 Beetle Sedan and 1971 Superbeetle Sedan
|
|
|
Bugpack makes some of the finest window rubber period! It's made in the USA in their own facility. We have some of this window rubber on a car that's been parked outside for over 20 years, and the rubber still looks new! It fits and installs easily, without hardening or cracking, even many years later.This kit will do the windshield, rear quarter windows, and rear window in one complete kit!
|
|
|
|
|
|
|
|
|
|
|
Cal Look Window Rubber Kit, 1943-52 VW Beetle Sedan, 5pc, 111-0146C
|
|
|
Cal Look Window Rubber Kit, 1943-52 VW Beetle Sedan, 5pc, 111-0146C include the windshield seal, (2) rear quarter window seals, and (2) rear window seals! This rubber omits the window chrome, for a simple all glass and rubber look.
|
|
|
|
