|
|
|
|
|
|
Rear Decklid Seal, Beetle and Superbeetle, Econo
|
|
|
This rubber seal fits on the body of the car and flips up against the decklid, keeping dust and water out of your engine compartment. This is the econo version of this part, we also have a deluxe one made in USA.
|
|
|
|
|
|
|
|
|
|
Engine Compartment Seal, Rear, 1949-66 T1
|
|
|
This rubber seal that fits in the C-groove on the body of the car, and seals against the engine's sheetmetal to prevent hot air that just cooled the engine from getting back into the engine compartment. If it's split or gapped, engine temps skyrocket.
|
|
|
|
|
|
|
|
|
|
Engine Firewall Seal (Top Seal above Transaxle), All Upright Engines, 111-813-741G-111-741G
|
|
|
Engine Firewall Seal (Top Seal above Transaxle), All Upright Engines, 111-813-741G-111-741G is the rubber seal that fits into the C-Groove on the body, and runs over the bellhousing of the transaxle. It seals the tin and prevents hot air from re-entering the engine compartment.
|
|
|
|
|
|
|
|
|
|
Rear Decklid Seal, Beetle and Superbeetle, Deluxe
|
|
|
This rubber seal fits on the body of the car and flips up against the decklid, keeping dust and water out of your engine compartment. This is our Deluxe version of this seal, made in USA.
|
|
|
|
|
|
|
|
|
|
Engine Compartment Seal, Rear, 1967-79 T1 and 1968-71 Type 2, 111-813-705D-111-705D
|
|
|
Engine Compartment Seal, Rear, 1967-79 T1 and 1968-71 Type 2, 111-813-705D-111-705D fits in the C-groove on the body of the car, and seals against the engine's sheet metal to prevent hot air that just cooled the engine from getting back into the engine compartment. If it's split or gapped, engine temps skyrocket.
|
|
|
|
|
|
|
|
|
|
|
Rear Engine Seal, 1975-79 FI Beetle and Super Beetle, 133-813-705-133-705
|
|
|
Rear Engine Seal, 1975-79 FI Beetle and Super Beetle, 133-813-705-133-705 fits in the C-groove on the body of the car, and seals against the engine's sheetmetal to prevent hot air that just cooled the engine from getting back into the engine compartment.
|
|
|
|
|
|
|
|
|
|
Rear Decklid Seal, Beetle and Superbeetle, Mexibeetle
|
|
|
This is the best decklid seal available for your VW bug or superbeetle. It slips on (without screws) to your decklid, and the air-filled bubble-seal presses against the body of the car, for a leakless seal. Even works if your normal seal channel is gone!MADE IN USA!
|
|
|
|
|
|
|
|
|
|
Rear Decklid Liner, ABS Plastic, 1967 ONLY Beetle
|
|
|
Rear Decklid Liner, ABS Plastic, 1967 ONLY Beetle is EZ to install, it just slips in! Keeps the engine looking CLEAN! This item is very popular, indestructible panels made out of .060” ABS plastic which never falls apart due to moisture in the air, resists normal engine heat too!
MADE IN USA!
THESE LINERS ARE OVERSIZE and COSTLY TO SHIP. Estimated shipping may not be accurate.
|
|
|
|
|
|
|
|
|
|
|
Rear Decklid Liner, ABS Plastic, 1968 and Newer Beetle and Super Beetle
|
|
|
Rear Decklid Liner, ABS Plastic, 1968 and Newer Beetle and Super Beetle is EZ to install, it just slips in! Keeps the engine looking CLEAN! This item is very popular, indestructible panels made out of .060” ABS plastic which never falls apart due to moisture in the air, resists normal engine heat too!
MADE IN USA!
THESE LINERS ARE OVERSIZE and COSTLY TO SHIP. Estimated shipping may not be accurate.
|
|
|
|
|
|
|
|
|
|
|
Rear Decklid Liner, ABS Plastic, 1954-66 Beetle
|
|
|
Rear Decklid Liner, ABS Plastic, 1954-66 Beetle is EZ to install, it just slips in! Keeps the engine looking CLEAN! This item is very popular, indestructible panels made out of .060” ABS plastic which never falls apart due to moisture in the air, resists normal engine heat too!
MADE IN USA!
THESE LINERS ARE OVERSIZE and COSTLY TO SHIP. Estimated shipping may not be accurate.
|
|
|
|
|
|
|
|
|
|
Firewall, Tarboard Insulation Kit for ALL BUG Convertibles
|
|
|
|
|
|
|
|
|
|
|
|
|
Engine Tarboard Kit, OEM Style, Through 1974 Beetle or Superbeetle SEDAN
|
|
|
This is a very close replication of the German Engine Compartment Tarboards. Tarboards lined the engine bay to absorb noise and vibration, to make for a quieter ride. This 3 piece kit is a full 5mm thick. You will have to cut your own holes for installation.
|
|
|
|
|
|
|
|
|
|
|
Tarboard Insulation Firewall Set for BEETLE SEDAN 1956-79
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Engine Tarboard Set (Firewall Insulation) 5 pcs, 1956-74 Karmann Ghia, 141-805T
|
|
|
Engine Tarboard Set (Firewall Insulation), 1956-74 Karmann Ghia, 141-805T (5 pc kit) is used to prevent engine noise and heat from making it's way from the engine bay forward to the cabin. These are often in pretty ratty shape; Replace them and they really quiet it down.
|
|
|
|
|
|
|
|
|
|
Engine Compartment Seal, 1972-79 Type 2 and Type 4, 411-813-225
|
|
|
Engine Compartment Seal, 1972-79 Type 2 and Type 4, 411-813-225 is a replacement engine seal for VW Busses with the Type 4 engine. This can also be used to Type 1s, if you don't want to have to remove the engine to change the engine seal! This engine seal is installed after the engine is put in, and removed prior to engine removal. It's shaped like an "H" with one slit fitting the engine tin, and the other fitting the body. When using this instead of the stock type 1 engine seal, it's more forgiving of "gaps" or poor alignment of the engine and/or the body sheet metal due to accidents having tweaked the body. Remember, when installing this seal the shiny side goes DOWN toward the road! This seal is 121" long, 2-1/4" wide overall, and has a 5/8" wide center section in the slotted portion.
|
|
|
|
|
|
|
|
|
|
|
Sound Pads, Under Carpet Tarboard Set for ALL BEETLES 1973-79
|
|
|
|
|
|
|
|
|
|
|
|
|
Smooth Stainless Steel Firewall, 3 Pieces, Beetle & Superbeetle
|
|
|
vw bug ss firewalls,vw bug stainless steel firewalls,vw bug aluminum firewall,vw bug ss engine,vw bug stainless steel engine compartment
|
|
|
|
|
|
|
|
|
|
Louvered Stainless Steel Firewall, 3 Pieces, Beetle & Superbeetle
|
|
|
This is a great item to dress up your engine compartment. It covers the front and both sides of the engine compartment with a louvered polished stainless steel finish. MAY need to be trimmed for your car. Does not fit 1975+ Beetles or Superbeetles well.
|
|
|
|
|
|
|
|
|
|
Aluminum Engine Firewall Kit, Beetle and Super Beetle, 3 Piece Set
|
|
|
Aluminum Engine Firewall Kit, Beetle and Super Beetle, 3 Piece Set is made of top quality thick (.050") 6061 aluminum sheet, with a rolled bead around the perimeter for strength and rigidity. These panels are precision cut for a fantastic fit, secure with rivets, screws, etc. 3 Pieces do front and both sides.
|
|
|
|
