OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Engine Parts > Chemicals and Sealants
7 products found
Sort By:
1
Quick Seat Piston Ring Assembly Lubricant, by Total Seal, 2 Grams
Quick Seat Piston Ring Assembly Lubricant, by Total Seal, 2 Grams
Price: $24.95

Quick Seat Piston Ring Assembly Lubricant, by Total Seal, 2 Grams is a dry Piston Ring Powder that aids in piston ring sealing and break in. This product is designed to be brushed into your cylinder walls (by hand, rub it in) during final assembly, and it fills the hone grooves during ring break in. This promotes quicker ring seating, longer ring life, and better leak-downs. It's cheap, and it works! 2g Tub. This compound is NOT abrasive, it is a substance that smoothes out the cylinder walls for an immediate ring-seal to promote proper ring break-in.

After honing and final cleaning of the cylinders, wipe the cylinderwalls with a lint-free rag using a lacquer thinner or brake cleaner. Then wipe the cylinders with a light penetrating oi, and wipe them dry with a clean rag (to ensure the crosshatch is clean).

Apply the Quick Seat with your finger to the entire cylinder. If the cylinder wall was clean the powder will turn the cylinder a greenish tint. If the powder turns the cylinder a black or silverish color, the crosshatch was still dirty, and you need to reclean the cylinders and re-apply.

 more info
Curil-T2 Engine Sealant, 70ml Tube
Curil-T2 Engine Sealant, 70ml Tube
Price: $16.95

CURIL-T2 by Elring, is the finest sealant we have found for case halfs. It NEVER hardens, so if you ever have to take it apart and reassemble, cleanup is as easy as a little alcohol or mineral spirits! We use it for case halves, generator stands, and oil pumps. It is also excellent for the cylinder head washers in the valve cover area. The "T2" sealant has replaced both of Elring's former sealant products: "Curil T" and "Curil-K2".


PLEASE NOTE THAT THIS PRODUCT IS FLAMMABLE SO IT CAN ONLY BE SHIPPED VIA UPS GROUND! more info
Race Rod Moly Assembly Lube, 2.0oz
Race Rod Moly Assembly Lube, 2.0oz
Price: $14.95

Race Rod Moly Assembly Lube, 2.0oz is used for critical assembly of high torque fasteners, particularly connecting rod bolts. This is done so your torque is measuring rod bolt STRETCH, instead of friction on the fastener threads. more info
Distributor Points and Input Shaft Bearing Grease, 3oz, 22058
Distributor Points and Input Shaft Bearing Grease, 3oz, 22058
Price: $13.95

Distributor Points and Input Shaft Bearing Grease, 3oz, 22058 is a great high temp grease to use on the distributor cam lobes, where the rubbing block of the points rubs against. This location is often dry, resulting in "squeaky" points operation.

This high temperature grease won't fly out onto your points like Vaseline, or other greases! STICKY to stay on the distributor shaft and centrifugal advance mechanism.

This is also EXCELLENT for the needle bearings for your transmission input shaft, it's usually inside the engine's gland nut.

You should put some of this on the point lobe every 3k miles. This is also GREAT for input shaft and throw out bearings (inside the gland nut or flywheel), since it won't get hot and then fly out onto your clutch! Also used for generator or alternator bearings. This is a must for your garage.

 more info
Race Rod Moly Assembly Lube, .5oz
Race Rod Moly Assembly Lube, 0.5oz
Price: $8.95

Race Rod Moly Assembly Lube, .5oz is used for critical assembly of high torque fasteners, particularly connecting rod bolts. This is done so your torque is measuring rod bolt STRETCH, instead of friction on the fastener threads. more info
U.S. Lubricants High Performance MoS2 Assembly Lube (Race Rod Moly Assembly Lube), 0.25oz
U.S. Lubricants High Performance MoS2 Assembly Lube (Race Rod Moly Assembly Lube), 0.25oz
Price: $5.95

U.S. Lubricants High Performance MoS2 Assembly Lube (Race Rod Moly Assembly Lube), 0.25oz is used for critical assembly of high torque fasteners, particularly connecting rod bolts. This is done so your torque is measuring rod bolt STRETCH, instead of friction on the fastener threads. more info
Distributor Points and Input Shaft Bearing Grease, 1 Jar
Distributor Points and Input Shaft Bearing Grease, 1 Jar
Price: $4.95

Distributor Points and Input Shaft Bearing Grease, 1 Jar is a great high temp grease to use on the distributor cam lobes, where the rubbing block of the points rubs against. This location is often dry, resulting in "squeaky" points operation. We sell this is small quantities like this, since you only use this in very small amounts!

This high temperature grease won't fly out onto your points like Vaseline, or other greases! STICKY to stay on the distributor shaft and centrifugal advance mechanism.

This is also EXCELLENT for the needle bearings for your transmission input shaft, it's usually inside the engine's gland nut.

The 1 jar size doesn't sound like much, but it will last you years! You only need a meager amount every time you use it.

You should put some of this on the point lobe every 3k miles. This is also GREAT for input shaft and throw out bearings (inside the gland nut or flywheel), since it won't get hot and then fly out onto your clutch! Also used for generator or alternator bearings. This is a must for your garage.

 more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.