Scat Procar Slider Model Seat Adapter (Seat Tracks; Seat Mounting Brackets), Left Side, 1956-70 VW Beetle, 81380 are used to make the job of installing your new Procar seats into your car as easy as possible! These sliders/adapters make the installation a truly "Bolt In" job, without the need for heavy equipment or power tools!These adapters on the inside of your welded floor rails. VW factory rails have holes already drilled through the sides and rear areas. Simply line up the adapter so the holes line up with the factory holes, and insert a through bolt with washer and nut. This is designed this way to strengthen your seat frame on the floor pan, and also installs with no drilling, grinding, or welding. The seat with attached slider mounts to this fixed adapter. You have 3 available notches to dial in your seat height desired too!
Seat Sliders bolt directly to the Procar seat base, which then allow your new seats to move fore/aft for proper seat adjustment for drivers and passengers of various sizes! To move the seat fore or aft, you simply lifte the handle of the seat track or the slider assembly, and then push back or pull forward.
Easy to follow illustrated instructions, and mounting hardware, are included!
The Seat Adapter then adapt the Sliders to the actual car you are using, which fit over the stock floor pan rail using the stock seat rail slider and lock.
Both of these items are a true "Bolt-On" part, which is a rare thing in the VW Industry!
Don't be confused by our terminology of "Left" or "Right. We do it this way because many of our customers live in areas that have RHD cars, so refering to the side as "Driver's Side" would often be incorrect and confusing, so we have chosen to refer to them as LEFT and RIGHT, as is the case with you sitting in the car. Left is Driver's Side in North America, and Right is Driver's Side in Japan, Australia, England, etc etc.