OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Carbs & Fuel System >

SCAT Centerpull Linkage, (Twist Linkage), Dual Carbs on UPRIGHT ENGINES ONLY, Fits Dellorto DRLA, Weber IDF/IDA/ICT/DCNF, Kadron, and Solex PDSIT, 30050
SCAT Centerpull Linkage, (Twist Linkage), Dual Carbs on UPRIGHT ENGINES ONLY, Fits Dellorto DRLA, Weber IDF/IDA/ICT/DCNF, Kadron, and Solex PDSIT, 30050
2nd photo shows proper method to install carb and linkage return spring. Drill a hole in the rim of the alternator, at the same height as the throttle cable!
  
SCAT Centerpull Linkage, (Twist Linkage), Dual Carbs on UPRIGHT ENGINES ONLY, Fits Dellorto DRLA, Weber IDF/IDA/ICT/DCNF, Kadron, and Solex PDSIT, 30050 is an inexpensive linkage for Weber, Dellorto, and Kadron Dual Carburetors. Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage, like some buggies and trikes. Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good for as inexpensive as it is. This linkage only fits the upright engine, it does NOT fit Type 3 nor Type 4 engines!

It includes Forged right hand and left hand thread male rod ends for easy adjustment, a 6061`-T6 Billet Aluminum support stand with fan shroud support arm, and a throttle cable arm alignment for smooth operation.

We should mention that we prefer to OMIT the shroud support arm during installation, since it transmits vibration from shroud to carbs. It works better this way! It is also important to note that that this linkage does NOT fit dual IDFs or DRLAs on engines with fan shrouds with heater outlets.

TIP: For an inexpensive return spring, use a stock spring and connect it from the barrel clamp on the center of this linkage, and run it through a hole drilled into the rim of the alternator. Simple and works very well!

KADRON OWNERS: The carb arms included in the kit are for Weber and Dellorto carburetors, and WILL NOT work on the Kadrons. You must simply modify the arms already on your Kadrons. Simply grind or file the back of the linkage ball joint that is riveted to the carb arm, and then punch it off (drive it out) without bending the linkage arm (put the arm on a deep reach socket, and punch it out!). Finally, drill the hole big enough to insert the Allen screw through the hole, and adjust the linkage as usual. Easy, and works perfectly!
Price: $74.95


: 30050


QTY:
Overview
 
SCAT Centerpull Linkage, (Twist Linkage), Dual Carbs on UPRIGHT ENGINES ONLY, Fits Dellorto DRLA, Weber IDF/IDA/ICT/DCNF, Kadron, and Solex PDSIT, 30050 is an inexpensive linkage for Weber, Dellorto, and Kadron Dual Carburetors. Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage, like some buggies and trikes. Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good for as inexpensive as it is. This linkage only fits the upright engine, it does NOT fit Type 3 nor Type 4 engines!

TIP: For an inexpensive return spring, use a stock spring and connect it from the barrel clamp on the center of this linkage, and run it through a hole drilled into the rim of the alternator. Simple and works very well!

Related Items...
Carburetor Return Spring, 30 PICT, 30/31 PICT, and 34 PICT Carburetors, 113-129-881A
Price: $2.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
Carburetor Return Spring, 30 PICT, 30/31 PICT, and 34 PICT Carburetors, 113-129-881A
Snail Type Syncrometer Carb Sync Tool, GERMAN, SK Model
Price: $59.95
Snail Type Syncrometer Carb Sync Tool, GERMAN, SK Model

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.