|
|
|
|
|
|
Horseshoe Clip, E-brake Pin on Rear Brake Shoes, 211-609-619C
|
Price: $0.75
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Horseshoe Clip, E-brake Pin on Rear Brake Shoes, 211-609-619C is the little clip that pinches onto the groove on the E-brake lever pin on the rear brake shoes. These are often missing or mangled. They are cheap, and nice to have around for a quick fix!
|
|
|
|
|
|
|
|
|
|
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, 311-129-777
|
Price: $1.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, 311-129-777 is used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! This version with the flat blade head is preferred by many because they can quickly tighten or loosen it with a screwdriver, instead of finding that pesky 8mm wrench!
|
|
|
|
|
|
|
|
|
|
Barrel Clamp HEX head, for Accelerator Cable and Heater Box Cable, 8 x 12mm, EACH, 111-129-921-311-129-777
|
Price: $1.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Barrel Clamp, Accelerator Cable and Heater Box Cable, 8 x 12mm, EACH, 111-129-921-311-129-777 are used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea!
|
|
|
|
|
|
|
|
|
|
Clutch Cable Clevis Pin. 1955-71 Type 2, 211-721-351
|
|
|
Clutch Cable Clevis Pin. 1955-71 Type 2, 211-721-351 is what holds the front end of the clutch cable to the pedal mechanism. This often gets worn out or "tweaked" by hasty mechanics. Be sure to grease it up during installation!
|
|
|
|
|
|
|
|
|
|
Clutch Cable Clevis Pin. 1972-79 Type 2, 211-721-351A
|
|
|
Clutch Cable Clevis Pin. 1972-79 Type 2, 211-721-351A is what holds the front end of the clutch cable to the pedal mechanism. This often gets worn out or "tweaked" by hasty mechanics. Be sure to grease it up during installation!
|
|
|
|
|
|
|
|
|
|
Throttle Cable Shortener or Lengthener, EACH
|
|
|
Shortened or custom chassis usually require control cables to be set to a custom length. This kit makes shortening your Throttle Cable a simple task. This part can also be used to extend cables that are just a little too short!
|
|
|
|
|
|
|
|
|
|
Clutch Return Spring (On Trans Axle), 1961-71 Type 1, 1961-75 Type 2, and 1964-73 Type 3, 113-141-723
|
|
|
Clutch Return Spring (On Trans Axle), 1961-71 Type 1, 1961-75 Type 2, and 1964-73 Type 3, 113-141-723 is the spring on the side of the trans axle that prevents the throw out bearing from riding the pressure plate wearing it out! These are often broken from rust and fatigue.
|
|
|
|
|
|
|
|
|
|
Heater Cable Boots, ALL MODELS 1945-79', PAIR, 113-711-691 PR
|
Price: $4.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Heater Cable Boots, ALL MODELS 1945-79', PAIR, 113-711-691 PR are the rubber boots that keep the cable grease IN the cable tube, and keep salt, dirt, and creatures from going into your heater cable tube messing things up!
|
|
|
|
|
|
|
|
|
|
Clutch Cable Shortening Kit
|
|
|
Shortened or custom chassis usually require control calbes to be set to a custom length. This kit makes shortening your Clutch Cable a simple task, and you can adjust it to length as needed.
|
|
|
|
|
|
|
|
|
|
Throttle Cable Guide Tube, 1967 and Later Upright Engines, 043-129-893
|
|
|
Throttle Cable Guide Tube, 1967 and Later Upright Engines, 043-129-893 allows the throttle cable a nice straight run through the fan shroud, without getting cut up or kinked. When installed you don't see this tube, but it's really important!
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 3655mm, 1973-74 Type 2, 211-721-555T
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Barrel Clamp HEX head, for Accelerator Cable and Heater Box Cable, 8 x 12mm, Pack of 5, 111-129-921
|
|
|
Barrel Clamp, Accelerator Cable and Heater Box Cable, 8 x 12mm, Pack of 5, 111-129-921 are used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea!
|
|
|
|
|
|
|
|
|
|
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, Pack of 5 Clamps, 311-129-777
|
Price: $6.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, Pack of 5 Clamps, 311-129-777 is used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! This version with the flat blade head is preferred by many because they can quickly tighten or loosen it with a screwdriver, instead of finding that pesky 8mm wrench!
|
|
|
|
|
|
|
|
|
|
Heater Cable, 1955-67 Type 2, 5715mm, 211-711-629B
|
|
|
Heater Cable, 1955-67 Type 2, 5715mm, 211-711-629B is the cable that runs from your heater control knob thru the heater cable tube, to the heater box on each side of the engine. Kinked or rusty cables will stick and bind, and make heater control a pain! You need one of these to do your bus, it's actually a split cable and will control both heater boxes when installed.
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 3668mm, 1973-79 CARBURETED Type 2, 211-721-555R
|
|
|
Throttle Cable, 3668mm, 1973-79 CARBURETED Type 2, 211-721-555R is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH.This cable can be used on all Type 2s with T4 engines that have been converted to dual carbs too, included the ones that had FI!
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 1980-83 Vanagon with Manual Trans, 251-721-555
|
|
|
Throttle Cable, 1980-83 Vanagon with Manual Trans, 251-721-555 is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH. This fits the FI Equipped Vanagons.
|
|
|
|
|
|
|
|
|
|
Throttle Cable Extension or Shortening Kit
|
|
|
Throttle Cable Extension or Shortening Kit is a clever kit which allows you to get another 1 1/2" of reach on a cable that snapped off, or it just a hair too short! You can also use this on shortened chassis cars, to make the throttle cable the correct length for your application. This is a "must have" for your toolbox or glove box.
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 3557mm, 1955-64 Type 2, 211-721-555A
|
|
|
Throttle Cable, 3557mm, 1955-64 Type 2, 211-721-555A is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH.
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 3455mm, 1975-79 FI Type 2, 211-721-555AA
|
|
|
Throttle Cable, 3455mm, 1975-79 FI Type 2, 211-721-555AA is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH.
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 3566mm, 1964-68 Type 2, 211-721-555C
|
|
|
Throttle Cable, 3566mm, 1964-68 Type 2, 211-721-555C is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH.
|
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 3660mm, 1968-69 Type 2, 211-721-555D
|
|
|
Throttle Cable, 3660mm, 1968-69 Type 2, 211-721-555D is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH.
|
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 3680mm, 1969-71 Type 2, 211-721-555G
|
|
|
Throttle Cable, 3680mm, 1969-71 Type 2, 211-721-555G is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH.
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 3700mm, 1972 Type 2, 211-721-555J
|
|
|
Throttle Cable, 3700mm, 1972 Type 2, 211-721-555J is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH.
|
|
|
|
|
|
|
|
|
|
Throttle Cable Guide Tube Assembly, With Spring, 111-198-002
|
|
|
Throttle Cable Guide Tube Assembly, With Spring, 111-198-002 is that cool tube and spring assembly that fits between the stock carb and the fan shroud. It was originally used on models up through the 1965 model year. It's an additional return spring!
|
|
|
|
|
|
|
|
|
|
Emergency Brake Cable Shortening Kit
|
|
|
Shortened or custom chassis usually require control calbes to be set to a custom length. This kit makes shortening your (2) E-brake Cables a simple task.
|
|
|
|
|
|
|
|
|
|
Clutch Bowden Tube (Clutch Cable Sleeve), 1972-73 Beetle, Super Beetle, and Ghia, AND 1967-79 Type 2, 211-721-361D
|
|
|
Clutch Bowden Tube (Clutch Cable Sleeve), 1972-73 Beetle, Super Beetle, and Ghia, AND 1967-79 Type 2, 211-721-361D is a critical piece of the VW Clutch System. The Bowden Tube ensures the clutch setting doesn't change as the engine moves. If this is bad the clutch can chatter!
|
|
|
|
|
|
|
|
|
|
Cable Shortening Kit, Throttle, Clutch, and E-brake
|
|
|
Shortened or custom chassis usually require control calbes to be set to a custom length. This kit makes shortening your Throttle Cable, (2) E-brake Cables, and your Clutch Cable a simple task.
|
|
|
|
|
|
|
|
|
|
Clutch Cable, 3115mm, 1961-67 Type 2, 211-721-335B
|
|
|
Clutch Cable, 3115mm, 1961-67 Type 2, 211-721-335B is a great quality cable. We recommend liberally greasing it up during installation, since dry cables will wear out quickly, and will drive you crazy with the loud creaking and squeaking!
|
|
|
|
|
|
|
|
|
|
Clutch Cable, 3168mm, 1968-71 Type 2, 211-721-335E
|
|
|
Clutch Cable, 3168mm, 1968-71 Type 2, 211-721-335E is a great quality cable. We recommend liberally greasing it up during installation, since dry cables will wear out quickly, and will drive you crazy with the loud creaking and squeaking!
|
|
|
|
|
|
|
|
|
|
Clutch Cable, 3215mm, 1971-79 Type 2, 211-721-335J
|
|
|
Clutch Cable, 3215mm, 1971-79 Type 2, 211-721-335J is a great quality cable. We recommend liberally greasing it up during installation, since dry cables will wear out quickly, and will drive you crazy with the loud creaking and squeaking!
|
|
|
|
|
|
|
|
|
|
Clutch Bowden Tube (Clutch Cable Sleeve), 1949-71 T1, 1950-67 T2, and 1962-73 T3, 311-721-361
|
|
|
Clutch Bowden Tube (Clutch Cable Sleeve), 1949-71 T1, 1950-67 T2, and 1962-73 T3, 311-721-361 is a critical piece of the VW Clutch System. The Bowden Tube ensures the clutch setting doesn't change as the engine moves. If this is bad the clutch can chatter!
|
|
|
|
|
|
|
|
|
|
Clutch Adjusting Wrench Tool, EACH
|
|
|
Clutch Adjusting Wrench Tool, EACH is a handy palm-sized tool saves time and energy when adjusting your clutch. It is designed to slip over the clutch cable wing nut and gives you additional leverage to tighten or loosen your adjusting wing nut, even when they are stubborn! With this tool you can crank the nut with your entire hand, instead of trying to do it with a thumb and 1 finger!
|
|
|
|
|
|
|
|
|
|
Clutch and Accelerator Tube Boot, 1956-79 All Models, 111-701-293D-113-293D
|
|
|
Clutch and Accelerator Tube Boot, 1956-79 All Models, 111-701-293D-113-293D sits at the rear of the chassis, and the clutch cable and throttle cable go through this. This item prevents air leaks into the interior, and keeps water off the cables. These are almost always missing from cars too! This Is The Boot Where The Clutch Cable Tube And Accelerator Cable Go Into The Chassis
|
|
|
|
|
|
|
|
|
|
Amsoil Synthetic White Lithium Multi-Purpose Spray Grease, 10oz Aerosol, GSPSC-E
|
|
|
Amsoil Synthetic White Lithium Multi-Purpose Spray Grease, 10oz Aerosol, GSPSC-E is HIGHLY RECOMMENDED for our Vintage VWs for inaccessible lubrication needs. Door Hinges, Pedal Assemblies, e-brake cables, throttle cables, clutch cables, heater cables, etc. This product can ONLY ship via UPS Ground!
|
|
|
|
|
|
|
|
|
|
Speedometer Cable, Lower, 1975-79 Type 2, 224-957-809A
|
|
|
Speedometer Cable, Lower, 1975-79 Type 2, 224-957-809A is the cable from the wheel to the EGR Box. This model uses 2 cables, one from the EGR Box to the Speedometer head, and this one from the wheel to the EGR Box.
|
|
|
|
|
|
|
|
|
|
Speedometer Cable, 2450mm, 1968-75 Type 2, 211-957-801F
|
|
|
Speedometer Cable, 2450mm, 1968-75 Type 2, 211-957-801F is a high quality speedometer cable. Worn out cables will make noise or transmit inconsistent vehicle speed (Surging) as the cable grabs, wraps up, then releases!
|
|
|
|
|
|
|
|
|
|
Bulletproof Throttle Cable, 11' Long
|
|
|
This HD Cable is 3/32" thick Stainless Steel cable, 11' long to work in most applications (but some Bus applications require longer, so be sure to measure!)
|
|
|
|
|
|
|
|
|
|
Speedometer Cable, 2070mm, 1955-67 Type 2, 211-957-801E
|
|
|
Speedometer Cable, 2070mm, 1955-67 Type 2, 211-957-801E is a high quality speedometer cable. Worn out cables will make noise or transmit inconsistent vehicle speed (Surging) as the cable grabs, wraps up, then releases!
|
|
|
|
|
|
|
|
|
|
|
Bulletproof Throttle Cable, 16' Long
|
|
|
This HD Cable is 3/32" thick Stainless Steel cable, 16' long to work in most applications. Simply cut it down as needed.
|
|
|
|
|
|
|
|
|
|
Heater Cable, 1972 Type 2, RIGHT 4235mm, 211-711-630L
|
|
|
Heater Cable, 1972 Type 2, RIGHT 4235mm, 211-711-630L is the cable that runs from your heater control knob to the RIGHT heater box. Kinked or rusty cables will stick and bind. Consider changing both cables for smoothest operation.
|
|
|
|
|
|
|
|
|
|
Heater Cable, 1972 Type 2, LEFT 4100mm, 211-711-629L
|
|
|
Heater Cable, 1972 Type 2, LEFT 4100mm, 211-711-629L is the cable that runs from your heater control knob to the LEFT heater box. Kinked or rusty cables will stick and bind. Consider changing both cables for smoothest operation.
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 1983-91 Vanagon with Manual Trans, 251-721-555Q
|
|
|
Throttle Cable, 1983-91 Vanagon with Manual Trans, 251-721-555Q is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH. This fits the FI Equipped Vanagons with the Manual Transmission.
|
|
|
|
|
|
|
|
|
|
Heater Cable, 1968-71 Type 2, RIGHT 4320mm, 211-711-630C
|
|
|
Heater Cable, 1968-71 Type 2, RIGHT 4320mm, 211-711-630C is the cable that runs from your heater control knob to the RIGHT heater box. Kinked or rusty cables will stick and bind. Consider changing both cables for smoothest operation.
|
|
|
|
|
|
|
|
|
|
Heater Cable, 1973-79 Type 2, RIGHT, 4225mm, 211-711-630N
|
|
|
Heater Cable, 1973-79 Type 2, RIGHT, 4225mm, 211-711-630N is the cable that runs from your heater control knob to the RIGHT heater box. Kinked or rusty cables will stick and bind. Consider changing both cables for smoothest operation.
|
|
|
|
|
|
|
|
|
|
Heater Cable, 1973-79 Type 2, LEFT, 4100mm, 211-711-629N
|
|
|
Heater Cable, 1973-79 Type 2, LEFT, 4100mm, 211-711-629N is the cable that runs from your heater control knob to the LEFT heater box. Kinked or rusty cables will stick and bind. Consider changing both cables for smoothest operation.
|
|
|
|
|
|
|
|
|
|
Heater Cable, 1968-71 Type 2, LEFT 4115mm, 211-711-629F
|
|
|
Heater Cable, 1968-71 Type 2, LEFT 4115mm, 211-711-629F is the cable that runs from your heater control knob to the LEFT heater box. Kinked or rusty cables will stick and bind. Consider changing both cables for smoothest operation.
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 1980-83 Vanagon with Auto Trans, 251-723-555
|
|
|
Throttle Cable, 1980-83 Vanagon with Auto Trans, 251-723-555 is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH. This fits the FI Equipped Vanagons with the Automatic Transmission.
|
|
|
|
|
|
|
|
|
|
Throttle Cable, 1983-91 Vanagon with Auto Trans, 251-723-555E
|
|
|
Throttle Cable, 1983-91 Vanagon with Auto Trans, 251-723-555E is a high quality cable that we use on our own cars. Be sure to grease the cable during installation, to prevent grabbing and premature wear of the new cable! Grease means SMOOTH. This fits the FI Equipped Vanagons with the Automatic Transmission.
|
|
|
|
|
|
|
|
|
|
Throttle Cable and Sheath Kit, Use with Center Mount Weber or Dellorto IDF With Mount On Filter Ear, EACH
|
|
|
Throttle Cable and Sheath Kit, Use with Center Mount Weber or Dellorto IDF With Mount On Filter Ear, EACH has an extra length cable so you can use this on everything from VW Bugs, Ghias, and even dune buggies, sand rails, and vans too! Just shorten the cable as needed.
|
|
|
|
|
|
|
|
|
|
Heater Cable, 1980-83 Type 2 (Vanagon), LEFT, 4130mm, 251-711-629
|
|
|
Heater Cable, 1980-83 Type 2 (Vanagon), LEFT, 4130mm, 251-711-629 is the cable which runs from your heater control knob to the LEFT heater control box. Kinked or rusty cables will stick and bind. Consider changing both cables for smoothest operation. These are often broke at the dash or the control box (engine).
|
|
|
|
