|
|
|
|
|
|
Ball Seat Conversion Washers, Each
|
|
Price: $1.50
|
|
|
These washers are specifically designed for wheel applications that require a Ball Seat, so you can use Cone Seat (Tapered Seat) Wheel Nuts/Bolts! Finding good Ball Seal Nuts/Bolts is impossible, so you simply use Cone Seat ones with these Washers. These are Ball Seat on the Wheel Side, and Cone Seat on the Nut side!
|
|
|
|
|
|
|
|
|
|
Lug Nut (Wheel Bolt), 12mm X 1.5, 1949-67 Type 1, 19mm Head, 111-601-139
|
|
Price: $3.00
|
|
|
Lug Nut (Wheel Bolt), 12mm X 1.5, 1949-67 Type 1, 19mm Head, 111-601-139 are a stock style wheel bolt, used to hold the wheels to the brake drum. While they are a PITA to put in, you will get used to balancing the tire on your foot while you thread the bolts in!
|
|
|
|
|
|
|
|
|
|
Lug Nut (Wheel Bolt), 14mm X 1.5, 1968+ Type 1, 19mm Head, 251-601-139
|
|
Price: $3.00
|
|
|
Lug Nut (Wheel Bolt), 14mm X 1.5, 1968+ Type 1, 19mm Head, 251-601-139 are a stock style wheel bolt, used to hold the wheels to the brake drum. While they are a PITA to put in, you will get used to balancing the tire on your foot while you thread the bolts in!
|
|
|
|
|
|
|
|
|
|
Hub Cap Puller, Plain Version, Each, 311-012-243
|
|
Price: $3.95
|
|
|
Hub Cap Puller, Plain Version, Each, 311-012-243 is the basic version of our Hub Cap Puller. Don't ruin your rims and hub caps by using a screwdriver like all the Neanderthals! This slips into the 2 holes on the hub cap rim, then lever it off! These fit all VW Beetles and Super Beetles, all Karmann Ghias, all VW Things, and even VW Type 3s and 4s.
|
|
|
|
|
|
|
|
|
|
Hubcap Clip and Rivet Kit, 5 Piece Set with Rivets for Wide 5 Wheels, 111-698-131
|
|
Price: $5.95
|
|
|
Hubcap Clip and Rivet Kit, 5 Piece Set with Rivets for Wide 5 Wheels, 111-698-131 This kit allows you to replace all the broken hubcap clips on your 5 lug wheels! 1 Kit includes 5 clips and rivets to repair 1 wheel!
|
|
|
|
|
|
|
|
|
|
Chrome 4-Way Lug Wrench, 17/19/21/23mm, 7056-10
|
|
Price: $7.95
|
|
|
The stock VW Lug Wrench SUCKS! The stock VW Lug Wrench SUCKS! Chrome 4-Way Lug Wrench, 17/19/21/23mm, 7056-10 is a chrome plated unit, which gives you greater leverage for tightening and loosening your VW Lug Nuts. No car should be without one of these in the trunk, especially at this price! Comes with 17mm, 19mm, 21mm, and 23mm socket ends to fit any VW.
|
|
|
|
|
|
|
|
|
|
Chrome FOLDING 4-Way Lug Wrench, 17/19/21/23mm, 7056-11
|
|
Price: $7.95
|
|
|
The stock VW Lug Wrench SUCKS! Chrome FOLDING 4-Way Lug Wrench, 17/19/21/23mm, 7056-11 is a chrome plated FOLDING unit which gives you greater leverage for tightening and loosening your VW Lug Nuts. No car should be without one of these in the trunk, especially at this price! Comes with 17mm, 19mm, 21mm, and 23mm socket ends to fit any VW.
|
|
|
|
|
|
|
|
|
|
Chrome Sandrail T-Lug 19mm Wheel Bolt Wrench
|
|
Price: $7.95
|
|
|
The stock VW Lug Wrench SUCKS! This chrome plated T-wrench has a 17" Long Beam to reach works even with deep off-road wheels! T-handle gives you greater leverage for tightening and loosening your VW Lug Nuts.
|
|
|
|
|
|
|
|
|
|
EMPI Center Cap Wheel Badges, Set of 4, 9814
|
|
Price: $9.95
|
|
|
EMPI Center Cap Wheel Badges, Set of 4, 9814 are a set of replacement emblems for wheel center caps, either EMPI or other. Adhesive backing makes installation a breeze on properly prepped wheel caps! Adhesive Emblem/Badge is just under 1 3/4" diameter.
|
|
|
|
|
|
|
|
|
|
Chrome Mag Wheel Lug Nut & Stud, 14mm, Set of 4, 6541-20
|
|
Price: $10.95
|
|
|
Chrome Mag Wheel Lug Nut & Stud, 14mm, Set of 4, 6541-20 is a set of 4 Mag Wheel Lug Nuts (Straight Shank), washers, and screw in studs. These wheel nuts have a shank that slips into some aftermarket wheels. We have taken the time to measure the nuts and studs. The shank on the wheel nut is .700" diameter and .750" Long, so your wheel must be wider than this to not bottom out the nut on the drum before the wheel is tight. Use a 13/16" Wheel Wrench with these wheel nuts. The Studs adapt from the stock 1968+ 14mm thread to a 1/2" x 7/8" which matches the wheel nuts.
|
|
|
|
|
|
|
|
|
|
Chrome Front Wheel Bearing Dust Caps w/o Hole, Pair
|
|
Price: $10.95
|
|
|
These are just the think to finish off your car if you have wheels that expose the nappy dust caps on 5 lug Type 1 vehicles! Custom chrome finish top off this custom wheel accessory. Price is for a PAIR. Note no hole for speedometer cable.
|
|
|
|
|
|
|
|
|
|
12mm Chrome Lug Nuts & Screw In Studs, 5
|
|
Price: $11.95
|
|
|
(5) 12mm Screw in studs, and 5 Acorn Nuts with a Cone Seat (Tapered Seat), compatible with most aftermarket wheels.
|
|
|
|
|
|
|
|
|
|
Chrome Mag Wheel Lug Nut & Stud, 12mm, 5
|
|
Price: $11.95
|
|
|
Set of 5 Mag Wheel Lug Nuts (Straight Shank), and screw in studs.
|
|
|
|
|
|
|
|
|
|
Extra Length 14 X 1.5mm Acorn Wheel Nuts, Cone Seat
|
|
Price: $11.95
|
|
|
These Extra Length Acorn (Closed Top) Wheel Nuts have a 60 Degree Cone seat. These are compatible with most aftermarket wheels (NOT Genuine Porsche, which use Ball Seat). Price is for a set of 5 nuts.
|
|
|
|
|
|
|
|
|
|
14mm Chrome Lug Nuts & Screw In Studs, 4
|
|
Price: $13.95
|
|
|
(4) 14mm Screw in studs, and 4 Acorn Nuts with a Cone Seat (Tapered Seat), compatible with most aftermarket wheels.
|
|
|
|
|
|
|
|
|
|
Press In Wheel Studs, 14mm X 1.500", Set of 5, 6544
|
|
Price: $14.95
|
|
|
Press In Wheel Studs, 14mm X 1.500", Set of 5, 6544 are are the surest way to solve wheel mounting problems! These aircraft quality studs feature a head chamfer for brake shoe clearance, and a starting shoulder for nut alignment and thread protection. These are the right length for 4 lug drums on 68 up T-1s. Drill the drum or hub to 37/64", then they press right in!We strongly recommend that you "Spot Face" the brake shoe side of the drum, FLAT, using an end mill, to give the head of the stud a flat surface to seat against. This also provides more clearance from the stud head to the brake hardware. Tack welding the stud to prevent it's moving is also good insurance during the installation.
|
|
|
|
|
|
|
|
|
|
Press In Wheel Studs, 14mm X 1.845", Set of 5, 6545
|
|
Price: $14.95
|
|
|
Press In Wheel Studs, 14mm X 1.845", Set of 5, 6545 are are the surest way to solve wheel mounting problems! These aircraft quality studs feature a head chamfer for brake shoe clearance, and a starting shoulder for nut alignment and thread protection. These are a little longer then needed, the Tech Inspectors at the track LOVE seeing a little extra thread on the studs! Drill the drum or hub to 37/64", then they press right in!We strongly recommend that you "Spot Face" the brake shoe side of the drum, FLAT, using an end mill, to give the head of the stud a flat surface to seat against. This also provides more clearance from the stud head to the brake hardware. Tack welding the stud to prevent it's moving is also good insurance during the installation.
|
|
|
|
|
|
|
|
|
|
Porsche Type Wheel Nuts, 14mm, Set of 5
|
|
Price: $14.95
|
|
|
These Open-Ended Steel Wheel Nuts feature a ball seat, which is what original VW and Porsche wheels were compatible with. These aren't "Fancy" or "Pretty", but they work well! 14 x 1.5mm threads.
|
|
|
|
|
|
|
|
|
|
Spare Tire Cover, Bus, Black
|
|
Price: $19.95
|
|
|
This is a black vinyl spare tire cover for use with the Bus Spare Tire Mount Kit. Really looks good after it's all covered up.
|
|
|
|
|
|
|
|
|
|
|
Spare Tire Cover, Bus, White
|
|
Price: $19.95
|
|
|
This is a white vinyl spare tire cover for use with the Bus Spare Tire Mount Kit. Really looks good after it's all covered up.
|
|
|
|
|
|
|
|
|
|
Hubcap, 4 Bolt Wheels, Mexican, 1968-73' T1 and T3, and 1972-80 T2, 251-601-151A
|
|
Price: $19.95
|
|
|
Hubcap, 4 Bolt Wheels, Mexican, 1968-73' T1 and T3, and 1972-80 T2, 251-601-151A is a Vanagon hubcap that are slightly taller than the original ones. Unfortunately, this is all that is available. They fit fine and look good, but are not German Quality. These are Mexican, which is better than Chinese!
|
|
|
|
|
|
|
|
|
|
Wheel, Drum, and Rotor Bolt Pattern Gauge, AC000155
|
|
Price: $19.95
|
|
|
Wheel, Drum, and Rotor Bolt Pattern Gauge, AC000155 is a must have if you are a wheel buyer that goes to the junkyards or swap meets! Using this tool you'll never have to guess what bolt pattern the wheels, drums,or rotors have ever again! Slide-rule style tool covers both metric and inches on bolt patterns, for all 4, 5, 6 and 8 lug patterns! You simply insert the points of the gauge into the lug holes of the wheel, the tool centers itself in the bolt hole, then read the gauge in the slider window to indicate the bolt pattern! The other side of the tool has holes, for measuring studs on drums and rotors, one tool does both! Works on all wheels, no matter what manufacturer!
|
|
|
|
|
|
|
|
|
|
Flush Mount Valve Stems, Set of 4
|
|
Price: $20.95
|
|
|
Now you see em', NOW YOU DON'T! Flush mount tire valve stems have plated smooth caps which allow for tire inflation with the stem adapter, but then you can remove them for the perfect compliment to any stock or custom wheel!
|
|
|
|
|
|
|
|
|
|
12mm Chrome Lug Bolts, 5
|
|
Price: $20.95
|
|
|
(5) 12mm Wheel Bolts with a Cone Seat (Tapered Seat), compatible with most aftermarket wheels. These are much stronger than screw in wheel studs and nuts.
|
|
|
|
|
|
|
|
|
|
14mm Chrome Lug Bolts, 4
|
|
Price: $20.95
|
|
|
(4) 14mm Wheel Bolts with a Cone Seat (Tapered Seat), compatible with most aftermarket wheels. These are much stronger than screw in wheel studs and nuts.
|
|
|
|
|
|
|
|
|
|
Aluminum Wheel Washer, Set of 5
|
|
Price: $21.95
|
|
|
These washers are designed to bolt up Lightweight Aluminum Wheels (Ercos, Mitchels, etc) with Tapered Seat (Cone Seat) Wheel Nuts or Lugs. These are compatible with our 6546-11 Wheel Lug Nuts. Price is for a set of 5 Washers.
|
|
|
|
|
|
|
|
|
|
Chrome Wheel Covers, 5 Bolt, Pair
|
|
Price: $24.95
|
|
|
These Chrome Wheel Covers are uses INSTEAD of hubcaps, on Wide-5 wheels. You can use them with Spoked wheels, ERCO's, etc. They cover up your gnarly brake drums when you are not using a hubcap.
|
|
|
|
|
|
|
|
|
|
Hubcap, 4 Bolt Wheels, Brazilian, 1968-73' T1 and T3, and 1972-80 T2, 251-601-151A
|
|
Price: $24.95
|
|
|
Hubcap, 4 Bolt Wheels, Brazilian, 1968-73' T1 and T3, and 1972-80 T2, 251-601-151A is a Vanagon hubcap that are slightly taller than the original ones. Unfortunately, this is all that is available. They fit fine and look good, but are not German Quality. These are Brazilian, which is better than Chinese!
|
|
|
|
|
|
|
|
|
|
Bus Spare Tire Mount, Front, 6036
|
|
Price: $29.95
|
|
|
Bus Spare Tire Mount, Front, 6036 is a great part to aid in mounting your spare tire up front! Many people do this when the nose of their van is already slightly damaged, cover it instead of fix it! Location is easier to get to than the stock one, especially for a larger tire!
|
|
|
|
|
|
|
|
|
|
|
5 Lug "Bump" Hubcap w/Wolfsberg Crest, 1949-65' Type and 3, and 1955-70 Type 2, Each, 6118-15
|
|
Price: $29.95
|
|
|
5 Lug "Bump" Hubcap w/Wolfsberg Crest, 1949-65' Type and 3, and 1955-70 Type 2, Each, 6118-15 fit either chrome or painted stock type wheels. Triple Chrome Plating to guard against premature rusting, topped with a high quality emblem that is BOLTED ON (not just "glued"). Sold each, with Emblem.
|
|
|
|
|
|
|
|
|
|
4 Lug "Dished" Hubcap w/Wolfsberg Crest, 1968-73' Type 1 and 3, and 1972-80 Type 2, Each, 6119-15
|
|
Price: $29.95
|
|
|
4 Lug "Dished" Hubcap w/Wolfsberg Crest, 1968-73' Type 1 and 3, and 1972-80 Type 2, Each, 6119-15 fit either chrome or painted stock type wheels. Triple Chrome Plating to guard against premature rusting, topped with a high quality emblem that is BOLTED ON (not just "glued"). Sold each, with Emblem.
|
|
|
|
|
|
|
|
|
|
Hub Cap Puller (Bear Claws), Dresses Jack Point With Polished Plug, Pair, 10-1075-111-150
|
|
Price: $29.95
|
|
|
Hub Cap Puller (Bear Claws), Dresses Jack Point With Polished Plug, Pair, 10-1075-111-150 dresses up that normally ugly jacking point under the running boards, with a high tech version of a timeless favorite accessory! Just pull it out, remove hub cap, and put it back in for storage! Price is for a pair of these!These are made from 6061-T6 Billet Aluminum. These fit all VW Beetles and Super Beetles, all Karmann Ghias, all VW Things, and even VW Type 3s and 4s. Two spring steel wire fingers hook into the drain holes in the edge of the hub cap for easy removal while eliminating damage to the wheel or hub cap caused by using a screw drivers to pry them off. They store neatly into the jack ports, while not in use. To give your car that finished show car look. Due to the many different manufacturers of hubcaps throughout the years, these may require modification to fit your hubcaps. Also - be sure to check your hubcaps to see if they even have the puller holes as some hubcaps don't even have them!
|
|
|
|
|
|
|
|
|
|
Chrome Steel Spinners, 2 Spoke, Set of 4
|
|
Price: $44.95
|
|
|
These Chrome Plates cast wheel spinners come complete with wheel inserts, set screws, wrench, and knock-offs. These do a great job finishing those custom wheels!
|
|
|
|
|
|
|
|
|
|
Chevy Wheel to 5-Lug VW Wheel Adapter, Steel, Pair
|
|
Price: $44.95
|
|
|
These adapters allow you to use 4 3/4" Chevy Patterned Wheels on your Wide-5 VW Drum. 7/16" Fine Threads. Adds positive offset to wheels, and we ONLY recommend these for off-road use.
|
|
|
|
|
|
|
|
|
|
Ford Wheel to 5-Lug VW Wheel Adapter, Steel, Pair
|
|
Price: $44.95
|
|
|
These adapters allow you to use 4 1/2" Ford Patterned Wheels on your Wide-5 VW Drum. 1/2" Fine Threads. Adds positive offset to wheels, and we ONLY recommend these for off-road use.
|
|
|
|
|
|
|
|
|
|
Chevy Wheel to 4-Lug VW Wheel Adapter, Aluminum, Pair
|
|
Price: $44.95
|
|
|
These adapters allow you to use 4 3/4" Chevy Patterned Wheels on your 4-Lug VW Drum. 7/16" Fine Threads. Adds positive offset to wheels, and we ONLY recommend these for off-road use. Will NOT fit disc brakes!
|
|
|
|
|
|
|
|
|
|
4-Lug VW Wheel to 5-Lug VW Drum Wheel Adapter, Steel, Pair
|
|
Price: $44.95
|
|
|
These adapters allow you to use 4 -lug VW Patterned Wheels (4 x 130mm) on your Wide-5 VW Drum. Adds positive offset to wheels, and we ONLY recommend these for off-road use.
|
|
|
|
|
|
|
|
|
|
EMPI Wheel Caps, Tall Profile Polished Aluminum, Set of 4, 9625
|
|
Price: $49.95
|
|
|
EMPI Wheel Caps, Tall Profile Polished Aluminum, Set of 4, 9625 are the finishing touch for custom wheels! Inside Diameter is 2.460", and an Outside Diameter of 3.090". Wheel must be removed for installation, since the set screws tighten from the back side!
|
|
|
|
|
|
|
|
|
|
EMPI Wheel Caps, Low Profile Polished Aluminum, Set of 4, 9619
|
|
Price: $49.95
|
|
|
EMPI Wheel Caps, Low Profile Polished Aluminum Set of 4, 9619 are the finishing touch for custom wheels! Inside Diameter is 2.460", and an Outside Diameter of 3.090". Wheel must be removed for installation, since the set screws tighten from the back side!
|
|
|
|
|
|
|
|
|
|
Chrome Steel Spinners, 3 Spoke, Set of 4
|
|
Price: $59.95
|
|
|
These Chrome Plates cast wheel spinners come complete with wheel inserts, set screws, wrench, and knock-offs. These do a great job finishing those custom wheels!
|
|
|
|
|
|
|
|
|
|
Wide 5 VW Wheel to 4-Lug VW Drum Wheel Adapter, Steel, Pair
|
|
Price: $66.95
|
|
|
These adapters allow you to use 5-Lug VW Patterned Wheels on your 4 x 130mm 4-Lug VW Drums. Adds positive offset to wheels, and we ONLY recommend these for off-road use.
|
|
|
|
|
|
|
|
|
|
165/80R15 Radial Tire (165/15)
|
|
Price: $89.95
|
|
|
This is the stock sized radial tire for the VW Beetle, Superbeetle, Ghia, and T-3. These are getting tough to find, so have them available here for you! Early cars with non-bead lock rims should also consider an inner tube for safety.
|
|
|
|
|
|
|
|
|
|
SSP 2 Liter Alloy, Black and Polished, 4 x 130mm Bolt Pattern, 15 x 5.5", EACH
|
|
Price: $94.95
|
|
|
SSP 2 Liter Alloy, Black and Polished, 4 x 130mm Bolt Pattern, 15 x 5.5", EACH is a 4 lug wheel Black and Polished fits 1968 and Later Beetles, Super Beetles, Ghias, Type 3s, and the Porsche 914. This wheel is actually modeled after the 2 Liter 914 wheel.
|
|
|
|
|
|
|
|
|
|
SSP Sprintstar 5-Spoke, Black and Polished, 15 x 5.5", 5 x 205mm Bolt Pattern
|
|
Price: $94.95
|
|
|
SSP Sprintstar 5-Spoke, Black and Polished, 15 x 5.5", 5 x 205mm Bolt Pattern is a classic 5 Lug wheel for Wide-5 cars. This one is has a Matte Black background, with polished rim and spokes! These weigh 22lbs, and have a 20mm offset. Remember to keep the polished portions of these wheels waxed to prevent oxidation.
|
|
|
|
|
|
|
|
|
|
SSP Sprintstar, Black and Polished, 15 x 5.5", 4 x 130mm Bolt Pattern
|
|
Price: $94.95
|
|
|
SSP Sprintstar, Black and Polished, 15 x 5.5", 4 x 130mm Bolt Pattern is a classic 4 Lug wheel for late Type 1 cars. This one is has a Matte Black background, with polished rim and spokes! These weigh 22lbs, and have a 20mm offset. Remember to keep the polished portions of these wheels waxed to prevent oxidation.
|
|
|
|
|
|
|
|
|
|
BRM 5-Spoke, Matte Black and Polished, 15 x 5.5", 5 x 205mm Bolt Pattern
|
|
Price: $94.95
|
|
|
BRM 5-Spoke, Matte Black and Polished, 15 x 5.5", 5 x 205mm Bolt Pattern is a classic 5 Lug wheel for Wide-5 cars. This one has a polished rim and spokes, with a matte black background on the wheels. These timeless wheels look good on any Wide-5 VW! These weigh 22lbs, and have a 14mm offset. Remember to keep the polished parts of these wheels waxed to prevent oxidation.
|
|
|
|
|
|
|
|
|
|
BRM 5-Spoke, Gloss Black and Polished, 15 x 5", 5 x 205mm Bolt Pattern
|
|
Price: $94.95
|
|
|
BRM 5-Spoke, Gloss Black and Polished, 15 x 5", 5 x 205mm Bolt Pattern is a classic 5 Lug wheel for Wide-5 cars. This one has a polished rim and spokes, with a gloss black background on the wheels. These timeless wheels look good on any Wide-5 VW! These weigh 22lbs, and have a 14mm offset. Remember to keep the polished parts of these wheels waxed to prevent oxidation.
|
|
|
|
|
|
|
|
|
|
American Eagle Riviera, Black and Polished, 4 x 130mm, 0769-5530
|
|
Price: $109.95
On Sale!: $99.95
|
|
|
American Eagle Riviera, Black and Polished, 4 x 130mm, 0769-5530 is a 4 lug wheel that is black with polished spokes, and a highly polished rim area. It is 15 X 5.5", weighs 19lbs, has a backspacing of +18mm, and is load rated at 1180lbs. This is a very popular wheel for 4 lug Beetles, Ghias, and Type 3s. It fits the "Late" 4 bolt pattern used in 1968 and newer Type 1s and 3s.These are NOT the cheap "Import" brand that aren't even true or balanced out of the box! If the price is "too good to be true", IT IS. These are made in the USA from a premium alloy, and Meet and EXCEED US DOT Standards; which are verified in a US Testing Facility!
|
|
|
|
|
|
|
|
|
|
SSP Fooks (Fuchs) Alloy, Black and Polished, 5 x 130mm Porsche Bolt Pattern, 15 x 4.5", EACH
|
|
Price: $109.95
|
|
|
SSP Fooks (Fuchs) Alloy, Black and Polished, 5 x 130mm Porsche Bolt Pattern, 15 x 4.5", EACH is a 5 lug Porsche Patterned wheel Black and Polished. This is a highly sought after wheel for custom street cars, though it does require Porsche drums/rotors. The 15 x 4.5" wheel is typically used in the front of Type 1s, with 5.5" wheels in the rear.
|
|
|
|
|
|
|
|
|
|
|
SSP Fooks (Fuchs) Alloy, Black and Polished, 5 x 130mm Porsche Bolt Pattern, 15 x 5.5", EACH
|
|
Price: $109.95
|
|
|
SSP Fooks (Fuchs) Alloy, Black and Polished, 5 x 130mm Porsche Bolt Pattern, 15 x 5.5", EACH is a 5 lug Porsche Patterned wheel Black and Polished. This is a highly sought after wheel for custom street cars, though it does require Porsche drums/rotors. The 15 x 5.5" wheel is typically used in the rear of Type 1s, with 4.5" wheels in the front. 15 x 5.5" is also used on all 4 wheels of Type 2s.
|
|
|
|
CONTACT US | SITE HELP