OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Wheels, Rims, & Hubcaps > Lug & Bolt Kits
30 products found
Sort By:
1
Lug Nut (Wheel Bolt), 12mm X 1.5, 1949-67 Type 1, 19mm Head, 111-601-139
Lug Nut (Wheel Bolt), 12mm X 1.5, 19mm Head (per EACH), fit 1949-67 Type 1, 111-601-139
Price: $3.00

Lug Nut (Wheel Bolt), 12mm X 1.5, 1949-67 Type 1, 19mm Head, 111-601-139 are a stock style wheel bolt, used to hold the wheels to the brake drum. While they are a PITA to put in, you will get used to balancing the tire on your foot while you thread the bolts in! more info
Lug Nut (Wheel Bolt), 14mm X 1.5, 1968+ Type 1, 19mm Head, 251-601-139
Lug Nut (Wheel Bolt), 14mm X 1.5, 1968+ Type 1, 19mm Head, 251-601-139
Price: $3.00

Lug Nut (Wheel Bolt), 14mm X 1.5, 1968+ Type 1, 19mm Head, 251-601-139 are a stock style wheel bolt, used to hold the wheels to the brake drum. While they are a PITA to put in, you will get used to balancing the tire on your foot while you thread the bolts in! more info
Press In Wheel Studs, 1/2-20 x 1 3/4" (FORD Size), EACH, 610258
Press In Wheel Studs, 1/2-20 x 1 3/4" (FORD Size), EACH, 610258
Price: $3.95

Press In Wheel Studs, 1/2-20 x 1 3/4" (FORD Size), EACH, 610258 are designed to fit our brake rotors which are drilled for the FORD pattern. Note that Ford and Chevy studs are a DIFFERENT size and diameter, you can't swap studs around willy nilly. The drum or rotor MUST be spot faced flat to ensure a good stable fit. more info
Press In Wheel Studs, 7/16-20 x 1 3/4" (CHEVY Size), EACH, 610259
Press In Wheel Studs, 7/16-20 x 1 3/4" (CHEVY Size), EACH, 610259
Price: $3.95

Press In Wheel Studs, 7/16-20 x 1 3/4" (CHEVY Size), EACH, 610259 are designed to fit our brake rotors which are drilled for the FORD pattern. Note that Ford and Chevy studs are a DIFFERENT size and diameter, you can't swap studs around willy nilly. The drum or rotor MUST be spot faced flat to ensure a good stable fit. more info
Wheel Stud Kit, 14 x 1.5mm Thread (Both Ends), Set of 4, 9484
Wheel Stud Kit, 14 x 1.5mm Thread (Both Ends), Set of 4, 9484
Price: $5.95

Wheel Stud Kit, 14 x 1.5mm Thread (Both Ends), Set of 4, 9484 threads into your 1968 and newer Type 1 and 3 VW drums and rotors. Then you can choose which Lug Nuts fit the wheels you have! Just make sure they are 14 x 1.5mm!

This is a set of 4 to do one wheel, you'll need (4) sets to do a complete car!
 more info
Wheel Stud Kit, 14 x 1.5mm Thread (Both Ends), Set of 5, 9517
Wheel Stud Kit, 14 x 1.5mm Thread (Both Ends), Set of 5, 9517
Price: $8.95

Wheel Stud Kit, 14 x 1.5mm Thread (Both Ends), Set of 5, 9517 threads into your Porsche patterned drums or rotors. Then you can choose which Lug Nuts fit the wheels you have! Just make sure they are 14 x 1.5mm!

This is a set of 5 to do one wheel, you'll need (4) sets to do a complete car!

These studs have 10mm (3/8") of threads on the drum/rotor side, and 30mm (1 1/8") of threads on the wheel side.

This size is used on Type 1s and 3s from 1968+, and used on ALL Type 2s.
 more info
Wheel Stud Kit, 12 x 1.5mm Thread (Both Ends), Set of 5, 9516
Wheel Stud Kit, 12 x 1.5mm Thread (Both Ends), Set of 5, 9516
Price: $8.95

Wheel Stud Kit, 12 x 1.5mm Thread (Both Ends), Set of 5, 9516 threads into your Wide 5 patterned drums or rotors. Then you can choose which Lug Nuts fit the wheels you have! Just make sure they are 12 x 1.5mm and have the proper seat!

This is a set of 5 to do one wheel, you'll need (4) sets to do a complete car!

These studs have 10mm (3/8") of threads on the drum/rotor side, and 30mm (1 1/8") of threads on the wheel side.
 more info
12mm Chrome Lug Nuts & Screw In Studs, 5
12mm Chrome Lug Nuts & Screw In Studs, 5
Price: $11.95

(5) 12mm Screw in studs, and 5 Acorn Nuts with a Cone Seat (Tapered Seat), compatible with most aftermarket wheels. more info
Extra Length 14 X 1.5mm Acorn Wheel Nuts, Cone Seat
Extra Length 14 X 1.5mm Acorn Wheel Nuts, Cone Seat
Price: $11.95

These Extra Length Acorn (Closed Top) Wheel Nuts have a 60 Degree Cone seat. These are compatible with most aftermarket wheels (NOT Genuine Porsche, which use Ball Seat). Price is for a set of 5 nuts. more info
Wheel Stud and Nut Kit, 12 x 1.5mm Thread (Both Ends), Set of 5, 9533
Wheel Stud and Nut Kit, 12 x 1.5mm Thread (Both Ends), Set of 5, 00-9533-0
Price: $11.95

Wheel Stud and Nut Kit, 12 x 1.5mm Thread (Both Ends), Set of 5, 9533 threads into your Wide 5 patterned drums or rotors. This will work if you have steel wheels.

This is a set of 5 to do one wheel, you'll need (4) sets to do a complete car!

These studs have 10mm (3/8") of threads on the drum/rotor side, and 30mm (1 1/8") of threads on the wheel side.
 more info
Chrome Mag Wheel Lug Nut & Stud, 12mm, 5 Lug
Chrome Mag Wheel Lug Nut & Stud, 12mm, 5 Lug
Price: $12.95

Chrome Mag Wheel Lug Nut & Stud, 12mm, 5 Lug is a set of 5 Mag Wheel Lug Nuts (Straight Shank), and screw in studs. These fit Type 1s up thru 1967 5 lug models. In 1968 the cars changed to 14mm 4 lug, and this kit does not fit those! more info
Chrome Lug Bolts (Wheel Bolts), 14 x 1.5mm Thread, 20.5mm Long (Fits Steel and Aluminum Wheels), Ball Seat, Set of 4, 9568
Chrome Lug Bolts (Wheel Bolts), 14 x 1.5mm Thread, 20.5mm Long (Fits Steel and Aluminum Wheels), Ball Seat, Set of 4, 00-9568-0
Price: $14.95

Chrome Lug Bolts (Wheel Bolts), 14 x 1.5mm Thread, 20.5mm Long (Fits Steel and Aluminum Wheels), Ball Seat, Set of 4, 9568 threads into your 1968 and newer VW Drums and rotors. 19mm Hex head will use a 19mm (3/4") Lug Wrench.

This is a set of 4 to do one wheel, you'll need (4) sets to do a complete car!
 more info
Porsche Type Wheel Nuts, 14mm, Set of 5
Porsche Type Wheel Nuts, 14mm, Set of 5
Price: $15.95

These Open-Ended Steel Wheel Nuts feature a ball seat, which is what original VW and Porsche wheels were compatible with. These aren't "Fancy" or "Pretty", but they work well! 14 x 1.5mm threads. more info
14mm Chrome Lug Nuts & Screw In Studs, Set of 4
14mm Chrome Lug Nuts & Screw In Studs, Set of 4
Price: $16.95

14mm Chrome Lug Nuts & Screw In Studs, Set of 4 include (4) 14mm Screw in studs, and 4 Acorn Nuts with a Cone Seat (Tapered Seat), compatible with most aftermarket wheels. more info
Chrome Mag Wheel Lug Nut & Stud, 14mm, Set of 4
Chrome Mag Wheel Lug Nut & Stud, 14mm, Set of 4
Price: $16.95

Chrome Mag Wheel Lug Nut & Stud, 14mm, Set of 4 is a set of 4 Mag Wheel Lug Nuts (Straight Shank), washers, and screw in studs. These wheel nuts have a shank that slips into some aftermarket wheels.

We have taken the time to measure the nuts and studs. The shank on the wheel nut is .700" diameter and .750" Long, so your wheel must be wider than this to not bottom out the nut on the drum before the wheel is tight. Use a 13/16" Wheel Wrench with these wheel nuts. The Studs adapt from the stock 1968+ 14mm thread to a 1/2" x 7/8" which matches the wheel nuts. more info
14mm Chrome Lug Bolts (Wheel Bolts), Tapered Seat, Set of 4
14mm Chrome Lug Bolts (Wheel Bolts), Tapered Seat, Set of 4
Price: $18.95

14mm Chrome Lug Bolts (Wheel Bolts), Tapered Seat, Set of 4 include (4) 14mm Wheel Bolts with a Cone Seat (Tapered Seat), compatible with most aftermarket wheels. These are much stronger than screw in wheel studs and nuts. more info
Chrome Lug Bolts (Wheel Bolts), 14 x 1.5mm Thread, 60 Degree Tapered Seat, Set of 4, 9712
Chrome Lug Bolts (Wheel Bolts), 14 x 1.5mm Thread, 60 Degree Tapered Seat, Set of 4, 9712
Price: $19.95

Chrome Lug Bolts (Wheel Bolts), 14 x 1.5mm Thread, 60 Degree Tapered Seat, Set of 4, 9712 threads into your 1968 and newer VW Drums, and the 60 Degree Tapered Seat fits most new custom wheels. 19mm Hex head (you'll use a 19mm or 3/4" Lug Wrench).

This is a set of 4 to do one wheel, you'll need (4) to do a complete car! more info
Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 15mm Long (Fits Steel Wheels), Ball Seat, Set of 5, 9564
Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 15mm Long (Fits Steel Wheels), Ball Seat, Set of 5, 00-9564-0
Price: $19.95

Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 15mm Long (Fits Steel Wheels), Ball Seat, Set of 5, 9564 threads into your 1967 and older VW Drums. The Ball Seat will fit stock steel wheels, as well as Mangels. 19mm Hex head (you'll use a 19mm or 3/4" Lug Wrench).

This is a set of 5 to do one wheel, you'll need (4) sets to do a complete car! more info
Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 20mm Long (Fits Aluminum Wheels), Ball Seat, Set of 5, 9565
Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 20mm Long (Fits Aluminum Wheels), Ball Seat, Set of 5, 00-9565-0
Price: $19.95

Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 20mm Long (Fits Aluminum Wheels), Ball Seat, Set of 5, 9565 threads into your 1967 and older VW Drums. This is 5mm (1/4") longer than stock, which best fits thicker rims (usually aluminum). This is a Ball Seat bolt. 19mm Hex head will use a 19mm (3/4") Lug Wrench.

This is a set of 5 to do one wheel, you'll need (4) sets to do a complete car!
 more info
12mm Chrome Lug Bolts, 5
12mm Chrome Lug Bolts, 5
Price: $20.95

(5) 12mm Wheel Bolts with a Cone Seat (Tapered Seat), compatible with most aftermarket wheels. These are much stronger than screw in wheel studs and nuts. more info
Aluminum Wheel Washer, Set of 5
Aluminum Wheel Washer, Set of 5
Price: $21.95

These washers are designed to bolt up Lightweight Aluminum Wheels (Ercos, Mitchels, etc) with Tapered Seat (Cone Seat) Wheel Nuts or Lugs. These are compatible with our 6546-11 Wheel Lug Nuts. Price is for a set of 5 Washers. more info
Press In Wheel Studs, 14mm X 1.855", Set of 5
Press In Wheel Studs, 14mm X 1.855", Set of 5
Price: $21.95

Press In Wheel Studs, 14mm X 1.855", Set of 5 are are the surest way to solve wheel mounting problems! These aircraft quality studs feature a head chamfer for brake shoe clearance, and a starting shoulder for nut alignment and thread protection. These are a little longer then needed, the Tech Inspectors at the track LOVE seeing a little extra thread on the studs! Drill the drum or hub to 37/64", then they press right in!

We strongly recommend that you "Spot Face" the brake shoe side of the drum, FLAT, using an end mill, to give the head of the stud a flat surface to seat against. This also provides more clearance from the stud head to the brake hardware. Tack welding the stud to prevent it's moving is also good insurance during the installation.

IMPORTANT! While the manufacturer advertises this stud as 1.855" long, the real USABLE LENGTH of the stud from the wheel side of the stud flat, to the end of the threads, is 1.500". We measure the length from collar that is against the drum to the end of the THREADS. Other companies measure the unthreaded portion of the stud, which is a useless measurement! These are "advertised" as a 1.855" Long Stud on the packaging, but in reality are 1.500".

To properly press in these studs simply drill out your lug holes to 37/64", then they press in! In a pinch you can pull them in with an impact gun, washers, and some grease!

 more info
Press In Wheel Studs, 14mm X 2.200", Set of 5
Press In Wheel Studs, 14mm X 2.200", Set of 5
Price: $21.95

Press In Wheel Studs, 14mm X 2.200", Set of 5 are are the surest way to solve wheel mounting problems! These aircraft quality studs feature a head chamfer for brake shoe clearance, and a starting shoulder for nut alignment and thread protection. These are a little longer then needed, the Tech Inspectors at the track LOVE seeing a little extra thread on the studs! Drill the drum or hub to 9/16", then they press right in!

We strongly recommend that you "Spot Face" the brake shoe side of the drum, FLAT, using an end mill, to give the head of the stud a flat surface to seat against. This also provides more clearance from the stud head to the brake hardware. Tack welding the stud to prevent it's moving is also good insurance during the installation.

IMPORTANT! While the manufacturer advertises this stud as 2.200" long, the real USABLE LENGTH of the stud from the wheel side of the stud flat, to the end of the threads, is 1.800". We measure the length from collar that is against the drum to the end of the THREADS. Other companies measure the unthreaded portion of the stud, which is a useless measurement! These are "advertised" as a 2.200" Long Stud on the packaging, but in reality are 1.800" more info
Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 60 Degree Tapered Seat, Set of 5, 9711
Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 60 Degree Tapered Seat, Set of 5, 9711
Price: $24.95

Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 60 Degree Tapered Seat, Set of 5, 9711 threads into your 1967 and older VW Drums, and the 60 Degree Tapered Seat fits most new custom wheels. 19mm Hex head (you'll use a 19mm or 3/4" Lug Wrench).

This is a set of 5 to do one wheel, you'll need (4) to do a complete car! more info
Press In Wheel Studs, 14mm X 2.500", Set of 5
Press In Wheel Studs, 14mm X 2.500", Set of 5
Price: $29.95

Press In Wheel Studs, 14mm X 2.500", Set of 5 are are the surest way to solve wheel mounting problems! These aircraft quality studs feature a head chamfer for brake shoe clearance, and a starting shoulder for nut alignment and thread protection. These are a little longer then needed, the Tech Inspectors at the track LOVE seeing a little extra thread on the studs! Drill the drum or hub to 9/16", then they press right in!

We strongly recommend that you "Spot Face" the brake shoe side of the drum, FLAT, using an end mill, to give the head of the stud a flat surface to seat against. This also provides more clearance from the stud head to the brake hardware. Tack welding the stud to prevent it's moving is also good insurance during the installation.

To properly press in these studs simply drill out your lug holes to 9/16", then they press in! In a pinch you can pull them in with an impact gun, washers, and some grease!

 more info
Vintage Speed Tire Pressure Gauge (Black Leather Case Included), 155-950-00100
Vintage Speed Tire Pressure Gauge (Black Leather Case Included), 155-950-00100
Price: $34.95

Vintage Speed Tire Pressure Gauge (Black Leather Case Included), 155-950-00100 is an essential glovebox item for every classic aircooled VW and Porsche 356. Tire pressures on our cars are critical, and often over-inflated by "mechanics" that don't know our cars as well as we do! more info
Chrome Steel Spinners, 3 Spoke "Knock Offs", Set of 4
Chrome Steel Spinners, 3 Spoke "Knock Offs", Set of 4
Price: $44.95

Chrome Steel Spinners, 3 Spoke "Knock Offs", Set of 4 come complete with wheel inserts, set screws, wrench, and knock-offs. These do a great job finishing those custom wheels! These spinner hubs have a 61mm OD, so fit wheels with that size hole or larger. There are 3 set screws in each hub to tighten the hub into the wheel, and 1 more set screw to secure the spinner to the hub (it does spin on/off). more info
Black Steel Spinners, 3 Spoke "Knock Offs", Set of 4
Black Steel Spinners, 3 Spoke "Knock Offs", Set of 4
Price: $44.95

Black Steel Spinners, 3 Spoke "Knock Offs", Set of 4 come complete with wheel inserts, set screws, wrench, and knock-offs. These do a great job finishing those custom wheels! more info
Black Steel Spinners, 2 Spoke "Knock Offs", Set of 4
Black Steel Spinners, 2 Spoke "Knock Offs", Set of 4
Price: $44.95

Black Steel Spinners, 2 Spoke "Knock Offs", Set of 4 come complete with wheel inserts, set screws, wrench, and knock-offs. These do a great job finishing those custom wheels! more info
Chrome Steel Spinners, 2 Spoke "Knock Offs", Set of 4
Chrome Steel Spinners, 2 Spoke "Knock Offs", Set of 4
Price: $44.95

Chrome Steel Spinners, 2 Spoke "Knock Offs", Set of 4 come complete with wheel inserts, set screws, wrench, and knock-offs. These do a great job finishing those custom wheels! more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.