NOTICE

Please read this notice and only continue if you are willing to abide by our updated backorder acquisition and fulfillment terms of service.


Supply-chain disruptions have hampered our ability to acquire/restock items reliably. Additionally, a lack of backorder ETA information is a frustrating "new normal" for our hobby. As a result, we have had to change our BACKORDER ACQUISITION TERMS OF SERVICE. If you opt to have us "send backorders later", backordered items will ship automatically if we are able to get them within 30 days. Longer than 30 day backorders WILL BE AUTOMATICALLY CANCELLED. Made-to-order, Special-Order, and Direct-shipped items may take longer than 30 days, and will NOT be auto-canceled.


On the next page, you will be prompted to select a BACKORDER HANDLING INSTRUCTION for your Order Request. In every case, you are NOT CHARGED for out-of-stock items (we ONLY charge for items that are available to be shipped in a timely or reasonably reliable timeframe). If you opt to "send backorders later" you are automatically added to the waitlist for those items, and we post stock status / backorder info to your Order Status/Progress/History Detail View in your online Customer Account. You can email to cancel un-shipped/un-paid items at any time as long as they are not direct-shipped, special order or made/machined-to-order.

Currently many shipments are delayed and our response time to emails are slow (we are severely short-staffed). Please trust that even if we can't reply to your email promptly, we are continuing to work to fulfill your Order Request as best we can, and we will contact you once we have any new information that is not already posted in your online Order Progress/History area in your customer account.


Please only continue if you are prepared to be PATIENT. Some of the items in your cart might be out-of-stock, and if that is the case, within a day or two we will post itemized stock status information to your account and/or email you to let you know. We appreciate your continued support and understanding.


VW Parts Catalog > Engine Parts > Oil System > Full Flow Kits & Parts
84 products found
Sort By:
1 2
Setrab Dual Fan Pack Oil Cooler (Series 9, 20 Rows)
Setrab Dual Fan Pack Oil Cooler (Series 9, 20 Rows)
Price: $489.95

Setrab Dual Fan Pack Oil Cooler (Series 9, 20 Rows) is the finest oil cooler system you can buy for your VW! We have been selling these for over a decade, and their performance speaks for itself! The Dual Fan Pack is good for a 35F drop in oil temperatures in our cars.

Setrab Oil Coolers are the premier oil coolers available in the World, used on F-1, NASCAR, and SCCA cars! These coolers aren't shaped like a Mesa Cooler (Wide and flat cooler), they are more "shoebox" shaped, and this shape is better suited to installing in your VW (you'll see when you have to mount it!). Mild applications use the single fan pack, while all-out applications use the dual fan pack model.

Each fan only draws 3.5A during operation!

Cooler and fan dimensions are 16" long X 6 1/2" wide by 6" tall. The actual cooler is 15" long, it's 16" from the edge of mounting flange to edge of mounting flange. The cooler has 20 rows.

more info
Setrab Single Fan Pack Oil Cooler (Series 1, 19 Rows)
Setrab Single Fan Pack Oil Cooler (Series 1, 19 Rows)
Price: $309.95

Setrab Single Fan Pack Oil Cooler (Series 1, 19 Rows) is the finest oil cooler system you can buy for your VW! We have been selling these for over a decade, and their performance speaks for itself! The Single Fan Pack is good for a 20F drop in oil temperatures in our cars.

Setrab Oil Coolers are the premier oil coolers available in the World, used on F-1, NASCAR, and SCCA cars! These coolers aren't shaped like a Mesa Cooler (Wide and flat cooler), they are more "shoebox" shaped, and this shape is better suited to installing in your VW (you'll see when you have to mount it!). Mild applications use the single fan pack, while all-out applications use the dual fan pack model.

The fan only draws 3.5A during operation!

Cooler and fan dimensions are 8 1/4' long, 6" wide, and 6" tall. The actual cooler is only 7" wide, it's 8 1/4" from the edge of mounting flange to edge of mounting flange. The cooler has 19 rows.

more info
Bolt-On Cooler Fan Kit w/Filter, 96 Plate Oil Cooler and 9" Fan
Bolt-On Cooler Fan Kit w/Filter, 96 Plate Oil Cooler and 9" Fan, 00-9248-00
Price: $279.95

Bolt-On Cooler Fan Kit w/Filter, 96 Plate Oil Cooler and 9" Fan is designed for you to add an oil cooler and full-flow filter to your engine without machining! Kit includes cooler and fan, fan switch, oil return adapter, full flow pump cover & plug, and the oil filter adapter and hose.

This only fits dual relief cases due to the use of the return adapter.
more info
Setrab DUAL Fan/Shroud REPLACEMENT (Fans and Shroud ONLY)
Setrab DUAL Fan/Shroud REPLACEMENT (Fans and Shroud ONLY)
Price: $269.95

Setrab DUAL Fan/Shroud REPLACEMENT (Fans and Shroud ONLY) is a replacement Fan and Shroud assembly to mount onto your Setrab Cooler that has a broken or worn out fan and shroud assembly. THIS DOES NOT INCLUDE THE OIL COOLER! more info
Budget Slip-On Oil Hose, 1/2" ID, 100' Long
Budget Slip-On Oil Hose, 1/2" ID, 100' Long
Price: $239.95

Budget Slip-On Oil Hose, 1/2" ID, 100' Long is designed to work with 1/2" hose barbs. It's resistant to oil and other engine chemicals for long life. Burst Strength exceeds any engine application be sure to use good clamps!

This is a bulk length of 100' of hose!

This hose is rated to work between -40 to 312F, with a working pressure of 300psi!
more info
Mocal Thermostatic Sandwich Adapter (Mocal Oil Thermostat), Type 4 Engines (Tight Clearance Fittings), MOC-SP1TM18-8AN
Mocal Thermostatic Sandwich Adapter (Oil Thermostat), Type 4 Engines (-8AN Tight Clearance Fittings), MOC-SP1TM18
Price: $219.95

Mocal Thermostatic Sandwich Adapter (Mocal Oil Thermostat), Type 4 Engines (Tight Clearance Fittings), MOC-SP1TM18-8AN is a FANTASTIC product to add an oil cooler to your Type 4 engine, which have clearance "issues" with regular adapters! Thermostat opens at 180F to ensure proper warm up!

Simply remove your spin on filter (threaded 3/4-16), put this on the filter mount, orient the fitting location for your application, then tighten it down, and re-install your filter! Now run the lines to your cooler!

NOTE: This product will give you -8 make flares for the in and out fittings. Just use -8 lines and fittings to/from your oil cooler!
more info
Aircooled.Net Full Flow Filter Kit, 1968-71 Type 2
Aircooled.Net Full Flow Filter Kit, 1968-71 Type 2
Price: $164.95

Aircooled.Net Full Flow Filter Kit, 1968-71 Type 2 includes an oil pump cover, oil filter adapter, (4) -8 Flares and (4) -8 Swivel Hose Barb Ends, (3) 90 Degree Fittings, (2) 45 Degree Fittings (to snake around the Mustache Bar), and 6' of Hose! Case must be machined for installation!

When you buy this kit from ACN, we'll resurface the Pump Cover and Oil Filter Adapter, and Re-tap the Fitting Threads, FOR HALF PRICE!

more info
Aircooled.Net Full Flow Filter Kit, Type 3
Aircooled.Net Full Flow Filter Kit, Type 3
Price: $159.95

Aircooled.Net Full Flow Filter Kit, Type 3 includes an oil pump cover, oil filter adapter, (4) -8 Flares and (4) -8 Swivel Hose Barb Ends, (2) 90 Degree Fittings, (2) 45 Degree Fittings (to snake around the Mustache Bar), and 4' of Hose! Case must be machined for installation!

When you buy this kit from ACN, we'll resurface the Pump Cover and Oil Filter Adapter, and Re-tap the Fitting Threads, FOR HALF PRICE!

more info
Aircooled.Net Full Flow Filter Kit, Beetle, Super Beetle, Ghia, Thing, and Early Bus
Aircooled.Net Full Flow Filter Kit, Beetle, Super Beetle, Ghia, Thing, and Early Bus
Price: $139.95

Aircooled.Net Full Flow Filter Kit, Beetle, Super Beetle, Ghia, Thing, and Early Bus requires that the engine case be drilled. Kit includes an oil pump cover, oil filter adapter, (4) -8 Flares and (4) -8 Swivel Hose Barb Ends, (3) 90 Degree Fittings, and 4' of Hose!

When you buy this kit from ACN, we'll resurface the Pump Cover and Oil Filter Adapter, and Re-tap the Fitting Threads, FOR HALF PRICE!

more info
Setrab SINGLE Fan/Shroud REPLACEMENT (Fan and Shroud ONLY)
Setrab SINGLE Fan/Shroud REPLACEMENT (Fan and Shroud ONLY)
Price: $139.95

Setrab SINGLE Fan/Shroud REPLACEMENT (Fan and Shroud ONLY) is a replacement Fan and Shroud assembly to mount onto your Setrab Cooler that has a broken or worn out fan and shroud assembly. THIS DOES NOT INCLUDE THE OIL COOLER! more info
-8 (AN8) Stainless Steel Braided Hose, 25ft roll
-8 (AN8) Stainless Steel Braided Hose, 25ft roll
Price: $129.95

25 ft of -8 Stainless Steel Braided Hose is MORE than enough for that full flow filter or cooler job. This is the
"pretty" hose for plumbing your oil lines to your oil filter or oil cooler.
more info
Mocal Thermostatic Sandwich Adapter (Mocal Oil Thermostat), MOC-SP1T
Mocal Thermostatic Sandwich Adapter (Mocal Oil Thermostat), MOC-SP1T
Price: $129.95

Mocal Thermostatic Sandwich Adapter (Mocal Oil Thermostat), MOC-SP1T is a FANTASTIC product to add an oil cooler to your Type 1 engine that already has been full flowed for a spin on oil filter. Thermostat opens at 180F to ensure proper warm up!

Simply remove your spin on filter (threaded 3/4-16), put this on the filter mount, orient the fitting location for your application, then tighten it down, and re-install your filter! Now run the lines to your cooler!

This is actually a lot cheaper than trying to do this any other method (with an oil thermostat), it's an EXCELLENT VALUE for what you get!

This product does NOT include the Mocal specific fittings and seals needed to complete the installation, see the related products!

NOTE: If you have a Type 4 engine this is the WRONG PART, it will not clear the tight space you have to deal with. We have a Type 4 specific sandwich adapter for those applications!

more info
Budget Slip-On Oil Hose, 1/2" ID, 50' Long
Budget Slip-On Oil Hose, 1/2" ID, 50' Long
Price: $119.95

Budget Slip-On Oil Hose, 1/2" ID, 50' Long is designed to work with 1/2" hose barbs. It's resistant to oil and other engine chemicals for long life. Burst Strength exceeds any engine application be sure to use good clamps!

This is a bulk pack of 50' of hose.

This hose is rated to work between -40 to 312F, with a working pressure of 300psi!
more info
Fast Fab Billet Aluminum Oil Filter Mounting Bracket with Oil Pressure Bypass, Made in USA
Fast Fab Billet Aluminum Oil Filter Mounting Bracket with Oil Pressure Bypass
Price: $114.95

Fast Fab Billet Aluminum Oil Filter Mounting Bracket with Oil Pressure Bypass, Made in USA offers top quality & looks to boot! Inlets and outlets are drilled/tapped to a standard 3/8" NPT

Matches all other Fast Fab anodized products too! MADE IN USA!

This is a fantastic product for you guys that use those 30mm and larger oil pumps, ESPECIALLY with 20-50 oil! The bypass sends the excess oil back to the sump, to keep oil pressures in check! You simply plumb as normal, but the third oil hose is your RETURN hose to route the excess oil volume back to the case (you'll have to put a fitting in the case or your deep sump to connect the hose to)

This product lets you use the huge oil pumps and thick oil, preventing you from your oil pressure going too high, which causes the cooler relief piston to open BYPASSING THE STOCK OIL COOLER, which causes oil temps to skyrocket.

The anodizing will match all other Fast Fab products too!

more info
Replacement Mesa Oil Cooler Fan Kit (Fan ONLY), 00-9296-0
Replacement MESA-StyleOil Cooler Fan Kit (Fan ONLY), 00-9296-0
Price: $89.95

Replacement Mesa Oil Cooler Fan Kit (Fan ONLY), 00-9296-0 replaces the fan you have that died! This is a quiet, highly efficient fan which can also be used for custom applications, and can be run as a puller or a pusher. 570cfm @ 5.4A. more info
Oil Filter Adapter, Fittings On Top, Bypass Version, 50073
Oil Filter Adapter, Fittings On Top, Bypass Version, 50073
Price: $89.95

Oil Filter Adapter, Fittings On Top, Bypass Version, 50073 is a fantastic product for you guys that use those 30mm and larger oil pumps, ESPECIALLY with 20-50 oil! Send the excess back to the sump! Resurfacing is a good idea on this cast aluminum part. This product uses a stock oil relief piston and spring, in an ingenious layout. Plumb as normal, but the third oil hose is your RETURN hose to route the excess oil volume back to the case (you'll have to put a fitting in the case or your deep sump to connect the hose to)

This product lets you use the huge oil pumps and thick oil, preventing you from your oil pressure going too high, which causes the cooler relief piston to open BYPASSING THE STOCK OIL COOLER, which causes oil temps to skyrocket.

more info
Fast Fab Billet Aluminum Etched Oil Filter Mount
Fast Fab Billet Aluminum Etched Oil Filter Mount
Price: $89.95

Made in USA. This mounts is CNC machined from billet aluminum, then laser etched, and finally hard anodized for long lasting good looks. Fittings are tapped the Industry Standard 3/8" NPT. This matches all the other Fast Fab Anodized Products. more info
Bugpack Braided Oil Line Kit, 1/2" ID x 6'
Bugpack Braided Oil Line Kit, 1/2" ID x 6'
Price: $89.95

This kit for 1/2" SLIP ON barbs includes 6 Red Anodized clamp-on hose ends and 6' of hose. This is NOT Aircraft quality with swedged hose ends. This is a quick and easy way to connect a cooler or filter, but it will not withstand excessive pressures like an Aircraft hose system will. more info
Full Flow Oil Return Adapter, 1971+ (Dual Relief Cases ONLY)
Full Flow Oil Return Adapter, 1971+ (Dual Relief Cases ONLY)
Price: $69.95

This adapter allows you to full flow your case WITHOUT DRILLING/TAPPING THE CASE. Replaces the rear oil pressure relief plug, and then run the hoses! ONLY fits dual relief cases. Pretty slick! It's a -8 male fitting to connect to. more info
Budget Slip-On Oil Hose, 1/2" ID, 25' Long
Budget Slip-On Oil Hose, 1/2" ID, 25' Long
Price: $69.95

Budget Slip-On Oil Hose, 1/2" ID, 25' is designed to work with 1/2" hose barbs. It's resistant to oil and other engine chemicals for long life. Burst Strength exceeds any engine application be sure to use good clamps! This is a bulk pack of 25' of hose!

This hose is rated to work between -40 to 312F, with a working pressure of 300psi!
more info
Bugpack Billet Oil Filter Adapter, 1/2" NPT Fittings On Top, 3015-11
Bugpack Billet Oil Filter Adapter, 1/2" NPT Fittings On Top, 3015-11
Price: $69.95

Bugpack Billet Oil Filter Adapter, 1/2" NPT Fittings On Top, 3015-11 provides a place for you to mount a spin on oil filter for your VW Engine, and can be used prior to an external oil cooler. Come with mounting bolts & nuts. Resurfacing this billet aluminum part is not needed, the quality is very good, much better than the cast aluminum ones! more info
Econo Stainless Steel Braided Oil Hose, #10 x 8'
Econo Stainless Steel Braided Oil Hose, #10 x 8'
Price: $64.95

This Slip On hose gives the look of Aircraft Stainless Steel Braided Hose, but in a slip on version with clamp on ends. Easy to assemble and install. A nice upgrade when you must use slip on or barbed fittings. This is 8' of #10 hose. more info
Setrab ProLine Fitting, M22, -10 AN, Banjo, EACH, 22-M22BJAN10-90
Setrab ProLine Fitting, M22, -10 AN, Banjo, EACH, 22-M22BJAN10-90
Price: $62.95

Setrab ProLine Fitting, M22, -10 AN, Banjo, EACH, 22-M22BJAN10-90 converts the Setrab Fan Pack Oil Cooler to common AN Aircraft Fittings. Setrab ProLine Fittings are designed FOR Setrab Coolers, and engineered for maximum flow in the minimum space possible!

These fittings actually give a lot more clearance then using Aeroquip or Earls fittings, and in some applications every millimeter matters!

more info
Setrab ProLine Fitting, M22, -8 AN, Banjo, EACH, 22-M22BJAN08-90
Setrab ProLine Fitting, M22, -8 AN, Banjo, EACH, 22-M22BJAN08-90
Price: $59.95

Setrab ProLine Fitting, M22, -8 AN, Banjo, EACH, 22-M22BJAN08-90 converts the Setrab Fan Pack Oil Cooler to common AN Aircraft Fittings. Setrab ProLine Fittings are designed FOR Setrab Coolers, and engineered for maximum flow in the minimum space possible!

These fittings actually give a lot more clearance then using Aeroquip or Earls fittings, and in some applications every millimeter matters!

more info
-8 (AN8) Stainless Steel Braided Hose, 10' Length, 8821
-8 (AN8) Stainless Steel Braided Hose, 10' Length, 8821
Price: $59.95

-8 (AN8) Stainless Steel Braided Hose, 10' Length, 8821 is 10 ft of -8 Stainless Steel Braided Hose is enough for those full flow projects you need to finish off. This is the "pretty" hose for plumbing your oil lines to your oil filter or oil cooler. more info
Dual Oil Filter Adapter Kit (Twin Filters!), CB1800
Dual Oil Filter Adapter Kit (Twin Filters!), CB1800
Price: $49.95

Dual Oil Filter Adapter Kit (Twin Filters!), CB1800 allows you to remotely mount TWO oil filters on your VW Beetle or Bus. Ports are drilled & tapped to 3/8 NPT, so you'll have several options for fittings. We STRONGLY recommend you choose our Resurface & Re-Tap option to prevent installation problems.

You have your choice of which end you install your fittings, you'll simply use the 2 supplied plugs for the unused ports.
more info
-12 AN In-Line Thermostatic Fan Switch, 190F, Setrab
-12 AN In-Line Thermostatic Fan Switch, 190F, Setrab
Price: $49.95

Install this -12 Male/Female switch on the outlet of your oil cooler (Setrab, Mesa, or other), and you have an automatic switch for the oil cooler's electric fan!

We recommend that you install this on the outlet, to measure the oil temperature AFTER it has gone through the cooler. This allows your oil to get to operating temperature before beginning any cooling. This switch is really slick, and installation is fast and easy!

more info
-12 AN In-Line Thermostatic Fan Switch, 180F, Setrab
-12 AN In-Line Thermostatic Fan Switch, 180F, Setrab
Price: $49.95

Install this -12 Male/Female switch on the outlet of your oil cooler (Setrab, Mesa, or other), and you have an automatic switch for the oil cooler's electric fan!

We recommend that you install this on the outlet, to measure the oil temperature AFTER it has gone through the cooler. This allows your oil to get to operating temperature before beginning any cooling. This switch is really slick, and installation is fast and easy!

more info
Setrab Dual Fan Pack Mounting Brackets, Pair
Setrab Dual Fan Pack Mounting Brackets, PAIR
Price: $49.95

Setrab Dual Fan Pack Mounting Brackets, Pair allows you to properly mount your Setrab Fan Pack Oil Cooler to your car. It has cutouts to clear the oil fittings, and it spaces the cooler the proper distance, for good airflow in the tightest spaces.

You can make your own brackets, but once you try you will realize what a great deal these brackets are. It's just not worth the fabrication hassle to try to do this on your own!

These come with all mounting hardware to precisely bolt your new Setrab to the Brackets.

more info
-8 AN In-Line Thermostatic Fan Switch, 190F, Setrab
-8 AN In-Line Thermostatic Fan Switch, 190F, Setrab
Price: $47.95

Install this -8 Male/Female switch on the outlet of your oil cooler (Setrab, Mesa, or other), and you have an automatic switch for the oil cooler's electric fan!

We recommend that you install this on the outlet, to measure the oil temperature AFTER it has gone through the cooler. This allows your oil to get to operating temperature before beginning any cooling.

This switch is really slick, and installation is fast and easy!

more info
-8 AN In-Line Thermostatic Fan Switch, 180F, Setrab
-8 AN In-Line Thermostatic Fan Switch, 180F, Setrab
Price: $47.95

Install this -8 Male/Female switch on the outlet of your oil cooler (Setrab, Mesa, or other), and you have an automatic switch for the oil cooler's electric fan!

We recommend that you install this on the outlet, to measure the oil temperature AFTER it has gone through the cooler. This allows your oil to get to operating temperature before beginning any cooling. This switch is really slick, and installation is fast and easy!

more info
-6 AN In-Line Thermostatic Fan Switch, 180F, Setrab
-6 AN In-Line Thermostatic Fan Switch, 180F, Setrab
Price: $47.95

Install this -6 Male/Female switch on the outlet of your oil cooler (Setrab, Mesa, or other), and you have an automatic switch for the oil cooler's electric fan!

We recommend that you install this on the outlet, to measure the oil temperature AFTER it has gone through the cooler. This allows your oil to get to operating temperature before beginning any cooling. This switch is really slick, and installation is fast and easy!

more info
-10 AN In-Line Thermostatic Fan Switch, 190F, Setrab
-10 AN In-Line Thermostatic Fan Switch, 190F, Setrab
Price: $47.95

Install this -10 Male/Female switch on the outlet of your oil cooler (Setrab, Mesa, or other), and you have an automatic switch for the oil cooler's electric fan!

We recommend that you install this on the outlet, to measure the oil temperature AFTER it has gone through the cooler. This allows your oil to get to operating temperature before beginning any cooling. This switch is really slick, and installation is fast and easy! We like hotter fan switches to get the oil up to temperature, so that it flows, lubricates, and cools properly. Cold oil doesn't flow nor lubricate well!

more info
-10 AN In-Line Thermostatic Fan Switch, 180F, Setrab
-10 AN In-Line Thermostatic Fan Switch, 180F, Setrab
Price: $47.95

Install this -10 Male/Female switch on the outlet of your oil cooler (Setrab, Mesa, or other), and you have an automatic switch for the oil cooler's electric fan!

We recommend that you install this on the outlet, to measure the oil temperature AFTER it has gone through the cooler. This allows your oil to get to operating temperature before beginning any cooling. This switch is really slick, and installation is fast and easy!

more info
CPR Full Flow Oil Hose Bracket, aka: "The CLAW"
CPR Full Flow Oil Hose Bracket, aka: "The CLAW"
Price: $44.95

CPR Full Flow Oil Hose Bracket, aka: "The CLAW" is the perfect prevention for burned hoses when running a full flow oil system. The Claw mounts to the #4 Cylinder exhaust studs, keeping the oil hoses secure and away from hot exhaust tubing. This fits headers up to and including 1 3/4", and fits oil lines in -8, -10, and 1/2" Rubber Hose. The claw is CNC machined from 6061-T6 Aluminum and Anodized to Mil Spec in three colors, Red, Blue, and Black. The entire product is designed and manufactured in the USA!

NOTE: This item is NOT compatible with heater boxes!

more info
Billet Aluminum Oil Pump Cover, Full Flow
Billet Aluminum Oil Pump Cover, Full Flow
Price: $39.95

Precision machined billet aluminum VW oil pump cover offers top quality & looks to boot! Full flow outlet is drilled/tapped to a standard 3/8" NPT ,and is shorter in design for more pulley and tin clearance! Design for all 8mm stud cases. Pump Plug too! more info
Setrab ProLine Fitting, M22, -10 AN, 90 Degree, EACH
Setrab ProLine Fitting, M22, -10 AN, 90 Degree, EACH
Price: $39.95

Setrab ProLine Fitting, M22, -10 AN, 90 Degree, EACH converts the Setrab Fan Pack Oil Cooler to common AN Aircraft Fittings. Setrab ProLine Fittings are designed FOR Setrab Coolers, and engineered for maximum flow in the minimum space possible! -10 Size is great for guys mounting their oil cooler far from the engine (like up front), since it's less restrictive on long runs than -8!

These fittings actually give a lot more clearance then using Aeroquip or Earls fittings, and in some applications every millimeter matters!

more info
Setrab ProLine Fitting, M22, -10 AN, 45 Degree, EACH
Setrab ProLine Fitting, M22, -10 AN, 45 Degree, EACH
Price: $39.95

Setrab ProLine Fitting, M22, -10 AN, 45 Degree, EACH converts the Setrab Fan Pack Oil Cooler to common AN Aircraft Fittings. Setrab ProLine Fittings are designed FOR Setrab Coolers, and engineered for maximum flow in the minimum space possible!

These fittings actually give a lot more clearance then using Aeroquip or Earls fittings, and in some applications every millimeter matters!

more info
Setrab Single Fan Pack Mounting Brackets, Pair
Setrab Single Fan Pack Mounting Brackets, PAIR
Price: $39.95

Setrab Single Fan Pack Mounting Brackets, Pair allows you to properly mount your Setrab Single Fan Pack Oil Cooler to your car. It has cutouts to clear the oil fittings, and it spaces the cooler the proper distance, for good airflow in the tightest spaces.

You can make your own brackets, but once you try you will realize what a great deal these brackets are. It's just not worth the fabrication hassle to try to do this on your own!

These come with all mounting hardware to precisely bolt your new Setrab Cooler to the Brackets.

more info
Fast Fab Billet Aluminum Full Flow Oil Pump Cover, Made in USA
Fast Fab Billet Aluminum Full Flow Oil Pump Cover, Made in USA
Price: $39.95

Precision machined billet aluminum VW oil pump cover offers top quality & looks to boot! Full flow outlet is drilled/tapped to a standard 3/8" NPT ,and is shorter in design for more pulley and tin clearance! Design for all 8mm stud cases.

Matches all other Fast Fab anodized products too! MADE IN USA! more info

Fast Fab BIllet Aluminum Oil Cooler Block Off Plate
Fast Fab BIllet Aluminum Oil Cooler Block Off Plate
Price: $39.95

Made in USA. This CNC machined oil cooler block off plate is machined from 6061 aluminum, anodized and laser etched for long lasting good looks. Includes stainless steel hardware too!

These work great for anyone looking to eliminate the stock cooler and use a remote cooling system. Set you motor off with this great product!

NOTE: This block off does NOT come with the seals or gasket used for installation! You must use the oil cooler gasket (NOT STOCK SEALS) referenced in the Related Items field.

more info
Setrab ProLine Fitting, M22, -8 AN, 45 Degree, EACH
Setrab ProLine Fitting, M22, -8 AN, 45 Degree, EACH
Price: $37.95

Setrab ProLine Fitting, M22, -8 AN, 45 Degree, EACH converts the Setrab Fan Pack Oil Cooler to common AN Aircraft Fittings. Setrab ProLine Fittings are designed FOR Setrab Coolers, and engineered for maximum flow in the minimum space possible!

These fittings actually give a lot more clearance then using Aeroquip or Earls fittings, and in some applications every millimeter matters!

more info
Setrab ProLine Fitting, M22, -8 AN, 90 Degree, EACH
Setrab ProLine Fitting, M22, -8 AN, 90 Degree, EACH
Price: $37.95

Setrab ProLine Fitting, M22, -8 AN, 90 Degree, EACH converts the Setrab Fan Pack Oil Cooler to common AN Aircraft Fittings. Setrab ProLine Fittings are designed FOR Setrab Coolers, and engineered for maximum flow in the minimum space possible!

These fittings actually give a lot more clearance then using Aeroquip or Earls fittings, and in some applications every millimeter matters!

more info
Billet Aluminum Oil Filter Adapter Mount
Billet Aluminum Oil Filter Adapter Mount
Price: $32.95

This 6061 Billet Aluminum bracket is designed for exhaust stud mounting of all 3-bolt remote oil filter adapters. Perfect for Baja's or Sandrails! This part allows you to keep the filter mounted to the engine, so you do not have to remove the lines or filter when R&Ring the engine!

This is an Off-road or racing part only!

The other shops and stores selling this don't know (and won't tell you) that THIS PART WILL NOT FIT SEDANS, THE FILTER WILL NOT CLEAR THE BODYWORK!

more info
Braided Fitting 7/8" ID, Pair (Fits 3072 Oil Hose)
Braided Fitting 7/8" ID, PAIR (Fits 3072 Oil Hose)
Price: $29.95

This pair of Slip On hose ends give the look of Aircraft Stainless Steel Braided Hose, but in a slip on version with clamp on ends. Easy to assemble and install. A nice upgrade when you must use slip on or barbed fittings. This is for a pair of hose ends. more info
-8 (AN8) Aircraft Stainless Steel Braided Hose, 4'
-8 (AN8) Aircraft Stainless Steel Braided Hose, 4'
Price: $27.95

4 ft of -8 Stainless Steel Braided Hose is enough for those full flow projects you need to finish off! This is the strongest/best method of plumbing your oil lines to your oil filter or oil cooler. more info
Oil Filter Adapter Kit, Right Side Ports
Oil Filter Adapter Kit, Right Side Ports
Price: $24.95

This bracket allows you to remotely mount your oil filter on your VW Beetle or Bus. Ports are drilled & tapped to 3/8 NPT, you have several options for fittings. more info
Oil Filter Adapter, 1/2" NPT Fittings On Top
Oil Filter Adapter, 1/2" NPT Fittings On Top
Price: $24.95

Oil Filter Adapter, 1/2" NPT Fittings On Top, 3015 provides a place for you to mount a spin on oil filter for your VW Engine, and can be used prior to an external oil cooler. Comes with mounting bolts & nuts. Resurfacing this cast aluminum part is a wise idea prior to installation. more info
Fast Fab Oil Filter Header Mount
Fast Fab Oil Filter Header Mount
Price: $24.95

This 6061 Billet Aluminum bracket is designed for exhaust stud mounting of all 3-bolt remote oil filter adapters. Perfect for Baja's or Sandrails! This part allows you to keep the filter mounted to the engine, so you do not have to remove the lines or filter when R&Ring the engine!

This is an Off-road or racing part only!

The other shops and stores selling this don't know (and won't tell you) that THIS PART WILL NOT FIT SEDANS, THE FILTER WILL NOT CLEAR THE BODYWORK!

MADE IN USA! more info

Oil Cooler Block Off Adapter Plate
Oil Cooler Block Off Adapter Plate
Price: $24.95

When you are no longer using the stock oil cooler, you should use this block off to keep the engine oil flowing properly inside the engine. Plate includes the hardware and proper gasket. Blockoff casting is tapped for an oil temperature or pressure sender. more info
   
 
1 2