NOTICE

Please read this notice and only continue if you are willing to abide by our updated backorder acquisition and fulfillment terms of service.


Supply-chain disruptions have hampered our ability to acquire/restock items reliably. Additionally, a lack of backorder ETA information is a frustrating "new normal" for our hobby. As a result, we have had to change our BACKORDER ACQUISITION TERMS OF SERVICE. If you opt to have us "send backorders later", backordered items will ship automatically if we are able to get them within 30 days. Longer than 30 day backorders WILL BE AUTOMATICALLY CANCELLED. Made-to-order, Special-Order, and Direct-shipped items may take longer than 30 days, and will NOT be auto-canceled.


On the next page, you will be prompted to select a BACKORDER HANDLING INSTRUCTION for your Order Request. In every case, you are NOT CHARGED for out-of-stock items (we ONLY charge for items that are available to be shipped in a timely or reasonably reliable timeframe). If you opt to "send backorders later" you are automatically added to the waitlist for those items, and we post stock status / backorder info to your Order Status/Progress/History Detail View in your online Customer Account. You can email to cancel un-shipped/un-paid items at any time as long as they are not direct-shipped, special order or made/machined-to-order.

Currently many shipments are delayed and our response time to emails are slow (we are severely short-staffed). Please trust that even if we can't reply to your email promptly, we are continuing to work to fulfill your Order Request as best we can, and we will contact you once we have any new information that is not already posted in your online Order Progress/History area in your customer account.


Please only continue if you are prepared to be PATIENT. Some of the items in your cart might be out-of-stock, and if that is the case, within a day or two we will post itemized stock status information to your account and/or email you to let you know. We appreciate your continued support and understanding.



  VW Parts Catalog > Engine Parts >

"Pertronix 2 SVDA" Distributor, 12 VOLT (with Flamethrower II points replacement device installed), D182504

"Pertronix 2 SVDA" Distributor, 12 VOLT, D182504
Product photo shows Pertronix SVDA with the INCLUDED Pertronix Points Replacement Device. Distributor O-ring is Included with this unit.


 

"Pertronix 2 SVDA" Distributor, 12 VOLT, D182504 is the Pertronix SVDA, but with the Pertronix Flamethrower II Ignition Module pre-installed instead of the original Pertronix! This features a variable dwell, and will not burn out if you leave the key on!

This distributor comes WITH the Pertronix Flamethrower II Points Replacement device pre-installed. Build quality is not quite as good as the formerly available ACN SVDA, so you MAY have to disassemble, clean, and lube it to ensure smooth operation. But it is completely warrantied, so no worries there! Distributor O-ring is Included with this unit. This unit is a clone of the Bosch 034 distributor.

If you are installing a PERTRONIX DISTRIBUTOR and/or FlameThrower Electronic Points Device, please make sure to review the following Coil and Plug Wire Compatibility Requirements:

Pertronix SVDA (12V) Distributor with Flamethrower 2 Electronic Points Device -- is best paired with a 0.6 OHM LOW-IMPEDENCE Coil and can only be run with NON-metal-core plug wires. ** Although the Flamethrower 2 can be run with a 3.0ohm coil, Pertronix recommends a that you run a 0.6ohm low impedance coil for both better performance AND to meet the terms of their warranty! See related products below for compatible coil and plug-wire options.

If you are wondering why you would want to upgrade to the Pertronix II SVDA, one reason is that the II module senses when the key is on but the engine is not running. If you forgot your keys in the ignition, the original Pertronix module would burn out and need to be replaced. The Pertronix II is immune to this issue. The Pertronix 2 SVDA and Flamethrower II Points Replacement devices are designed to run with a low impedance (0.6 ohm) coil.

The combination of centrifugal and vacuum advance give the smoothest performance, a 3-4mpg improvement in your fuel economy on the highway, and a major drop in engine temps on the highway too!

Because we developed this SVDA distributor in the mid/late 1980s, then started selling them in quantity in the late 1990s, it is amazing that it took as long as it did for the copies to show up. This is the best of the copies.

SVDA stands for Single Vacuum Dual Advance (since it has BOTH vacuum and centrifugal advance, that's where the "Dual Advance" comes from). This Pertronix SVDA uses the same cap and rotor as the 009, so you may even have some tune up parts lying around!

This distributor is not custom tailored like our Flagship ACN SVDA, it's a "one model fits all" unit. It is certainly better than any 009, 010, 019, or 050, or other centrifugal only distributor you have. Note that this is designed to work with SVDA compatible induction, ie: FI, 34-3, 34-4, Weber ICT, IDF, Progressive, and Dellorto DRLA carbs.

Don't be a sucker and use that One Size Fits None "Uh-Oh-Nine". We feel the only nice thing about the 009 is it's inexpensive and simple, so it's nice to "keep around" in case you have a distributor problem of some sort.

The Pertronix SVDA comes with the Points Replacement Device PRE INSTALLED.

We have had repeated inquiries about SVDAs for 30 PICT 1 and 30 PICT 2 carbs. There is NO SVDA compatible with the 30-1 or 30-2 carbs, so your options are to either put a stock distributor on, use a 009 (yuck), or put an SVDA on in conjunction with a Single Port compatible 30/31 carburetor, since we have an SVDA for the 30/31.

This is a great deal for an "SVDA" distributor. It comes with our expertise, detailed instructions (emailed after purchase), and Pertronix's 2 year warranty with tech support.


Price: $209.95

: D182504


QTY:
Overview
 

"Pertronix 2 SVDA" Distributor, 12 VOLT, D182504 is the Pertronix SVDA, but with the Pertronix Flamethrower II Ignition Module pre-installed instead of the original Pertronix! This unit runs best with a low impedence (0.6ohm coil), and will not burn out if you leave the key on!

This distributor comes WITH the Pertronix Flamethrower II Points Replacement device pre-installed for you. Build quality is not quite as good as the formerly available ACN SVDA, so you MAY have to disassemble, clean, and lube it to ensure smooth operation. But it is completely warrantied by the manufacturer, so no worries there! Distributor O-ring is Included with this unit. This unit is a clone of the Bosch 034 distributor.

Item Features


Related Items...
03-010 Bosch Distributor Cap, 113-905-207C
Price: $34.95
03-010 Bosch Distributor Cap, 113-905-207C, fits SVDA, 009 and 094 Distributors, and most aircooled distributors for 1968 on.
Pertronix 45kV Flamethrower II Ignition Coil, Black, .6 Ohm, Oil Filled, 45011
Price: $49.95
Pertronix 45kV Flamethrower II Ignition Coil, Black, .6 Ohm, Oil Filled, 45011
Anti-Pulse Valve, for Vacuum Advance Distributors (SVDAs), EACH
Price: $39.95
Anti-Pulse Valve, for Vacuum Advance Distributors (SVDAs), Each
Bosch 04-033/04-110 Ignition Rotor, 043-905-225
Price: $19.95
Bosch 04-033/04-110 Ignition Rotor, 043-905-225
Pertronix 45kV Flamethrower II Ignition Coil, Chrome, .6 Ohm, Oil Filled, 45001
Price: $54.95
Pertronix 45kV Flamethrower II Ignition Coil, Chrome, .6 Ohm, Oil Filled, 45001
Pertronix Flame-Thrower 7mm Plug Wires, VW Style Distributor Caps, (CHOOSE COLOR)
Price: $49.95
Pertronix Flame-Thrower 7mm Plug Wires, VW Style Distributor Caps, (CHOOSE COLOR)
Vacuum Hose Tee Fitting, 3mm Barbs, EACH
Price: $2.95
Vacuum Hose Tee Fitting, 3mm Barbs, Each

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!