OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Fuel Injection >

Fuel Injector, REBUILT, 1984-91 Type 2 (Watercooled), 0-280-150-206
Fuel Injector, Rebuilt, 1984-91 Type 2 (Watercooled), 0-280-150-206
 
We sell our Rebuilt Injectors OUTRIGHT (with no core charges).
Fuel Injector, Rebuilt, 1984-91 Type 2 (Watercooled), 0-280-150-206 are the finest rebuilt fuel injectors we have found anywhere. We always recommend replacing all 4 in a matched set, so you do not wind up with fuel injectors of different flow rates on the same engine.
The rebuild process includes:
  • All remanufacturing including, coil winding, CNC machining, plastic injection molding, fuel injector assembly, and injector testing is performed in the USA.
  • All torn, bent, pitted or damaged Pintals are replaced.
  • All pitted or worn Pintal seats are discarded.
  • All replacement coils are wound and coated to EXCEED OEM specifications. Oversized brass electrical prongs are utilized to improve harness fit and conductivity.
  • All filter baskets are replaced.
  • Molded electrical connectors contain enlarged locating ribs to improve the fit of the OEM plug.
  • Internal O-rings are replaced.
  • All injectors are tested at least twice for the following:
  1. Leak testing at three times the required operating pressure
  2. Resistance testing to OEM specifications
  3. Repetitive stop and go spray pattern examinations
  4. Spray pattern is tested at varying frequencies (engine speeds) to assure optimal fuel economy.
  5. Flow rate precisely metered to the appropriate pulse width to within 2% of OEM specifications.
Price: $79.95
Brand/Type: REBUILT/REFURBISHED
Restrictions: NON-Returnable Item
Minimum order QTY:  4


Availability: Sporadic / Depends on availability of rebuildable cores
: 0-280-150-206

Final Sale Item Agreement

I AGREE TO NON RETURNABLE TERMS FOR THIS ITEM (non-returnable/NO WARRANTY).

FINAL SALE ITEM TERMS AND CONDITIONS
Upon shipment of this item, your purchase is FINAL - the item is NON-RETURNABLE.


QTY:
Overview
 
We sell our Rebuilt Injectors OUTRIGHT (with no core charges).
Fuel Injector, Rebuilt, 1984-91 Type 2 (Watercooled), 0-280-150-206 are the finest rebuilt fuel injectors we have found anywhere. We always recommend replacing all 4 in a matched set, so you do not wind up with fuel injectors of different flow rates on the same engine.
The rebuild process includes:
  • All remanufacturing including, coil winding, CNC machining, plastic injection molding, fuel injector assembly, and injector testing is performed in the USA.
  • All torn, bent, pitted or damaged Pintals are replaced.
  • All pitted or worn Pintal seats are discarded.
  • All replacement coils are wound and coated to EXCEED OEM specifications. Oversized brass electrical prongs are utilized to improve harness fit and conductivity.
  • All filter baskets are replaced.
  • Molded electrical connectors contain enlarged locating ribs to improve the fit of the OEM plug.
  • Internal O-rings are replaced.
  • All injectors are tested at least twice for the following:
  1. Leak testing at three times the required operating pressure
  2. Resistance testing to OEM specifications
  3. Repetitive stop and go spray pattern examinations
  4. Spray pattern is tested at varying frequencies (engine speeds) to assure optimal fuel economy.
  5. Flow rate precisely metered to the appropriate pulse width to within 2% of OEM specifications.

Related Items...
7mm Hi Pressure Fuel Hose (Fuel Injection), 7.0 X 3.0mm, per Meter, N202811
Price: $13.00
7mm Hi Pressure Fuel Hose (Fuel Injection), 7.0 X 3.0mm, per Meter, N202811
Fuel Injector Seal (Between Injector and Intake Manifold), Small, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-261A
Price: $1.25
Fuel Injector Seal (Between Injector and Intake Manifold), Small, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-261A
Fuel Injector Seal (Fuel Injector Retaining O-ring), Large, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-263
Price: $1.50
Fuel Injector Seal (Fuel Injector Retaining O-ring), Large, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-263

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!