Item Features
We have a LOT of experience setting up dual webers (25+ years!), so we offer and strongly recommend our Carb Setup Service to you when you buy your carburetors from Aircooled.Net! Frankly, if you try to bolt up your dual weber kit as supplied by Weber, you will have problems more often than not!So choosing the Carb Setup Service is completely optional and up to you, but STRONGLY RECOMMENDED. It's actually a bit of a pain, and time consuming to do properly, which is why ACN is the only company that offers this service on Weber purchases! The Carb Setup Service includes fixing known and unknown problems and Weber assembly errors, clean, set floats, trim gaskets, etc. Then we reassemble with the correct jets and emulsion tubes for your engine and elevation! Finish it off with a final bench adjustment so that YOUR setup time and headaches are minimized! Carb Setup Service INCLUDES JET CHANGES (Free jets!), the expense of the proper jets can exceed what we charge for the setup, so it's a great deal for you!
It doesn't matter WHICH dual weber kit you buy from us, ICTs, IDF, IDAs, we will give them the same attention to your carbs as if they were ours about to go on our own engine! When you select this option, Jet changes are included, but venturi costs are additional FOR THE PARTS ONLY. With the cost of jets and especially emulsion tubes, that alone makes it worth it!
We have the carburetor expertise to select your emulsion tubes, idle jets, main jets, and air jets, regardless of the elevation you will be driving at, all you will have to do is assemble, adjust and GO! Obviously you must have your fuel pressure set to 3-3.5psi, but if the engine is in good mechanical shape your bench time will turn into driving time!
|