|
|
|
|
|
|
Rubber Grommet, .125" ID x .25" OD, EACH
|
|
|
Rubber Grommet, .125" ID x .25" OD, EACH is used where objects have to route through a piece of metal. The grommet prevents chaffing damage. These are REALLY IMPORTANT to keep your car at 100%!
Most grommets on vintage VWs are cracked or simply missing!
|
|
|
|
|
|
|
|
|
|
|
Rubber Grommet, .375" ID x .5" OD, EACH
|
|
|
Rubber Grommet, .375" ID x .5" OD, EACH is used where objects have to route through a piece of metal. The grommet prevents chaffing damage. These are REALLY IMPORTANT to keep your car at 100%!
Most grommets on vintage VWs are cracked or simply missing!
|
|
|
|
|
|
|
|
|
|
|
Rubber Grommet, .25" ID x .500" OD, (Good for Metal Fuel Line Through Firewall Tin), EACH
|
Price: $0.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Rubber Grommet, .25" ID x .500" OD, (Good for Metal Fuel Line Through Firewall Tin), EACH is used where objects have to route through a piece of metal. The grommet prevents chaffing damage. These are REALLY IMPORTANT to keep your car at 100%!
Most grommets on vintage VWs are cracked or simply missing!
|
|
|
|
|
|
|
|
|
|
|
Rubber Grommet, .5" ID x .750" OD, EACH
|
Price: $0.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Rubber Grommet, .5" ID x .750" OD, EACH is used where objects have to route through a piece of metal. The grommet prevents chaffing damage. These are REALLY IMPORTANT to keep your car at 100%!
Most grommets on vintage VWs are cracked or simply missing!
|
|
|
|
|
|
|
|
|
|
|
Rubber Grommet, .75" ID x 1.067" OD, EACH
|
|
|
Rubber Grommet, .75" ID x 1.067" OD, EACH is used where objects have to route through a piece of metal. The grommet prevents chaffing damage. These are REALLY IMPORTANT to keep your car at 100%!
This grommet is perfect for routing breather hoses through engine tin!
|
|
|
|
|
|
|
|
|
|
Rubber Grommet, fits 1.125" opening, has 0.5" ID, per EACH
|
Price: $1.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Rubber Grommet, fits 1.125" opening, has 0.5" ID, per EACH. Use where objects have to route through a piece of metal. Good quality grommets prevent chaffing damage. These are REALLY IMPORTANT to keep your car at 100%!
Most grommets on vintage VWs are cracked or simply missing!
|
|
|
|
|
|
|
|
|
|
|
Rubber Grommet, .675" ID x 1.125" OD, EACH
|
Price: $1.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Rubber Grommet, .675" ID x 1.125" OD, EACH is used where objects have to route through a piece of metal. The grommet prevents chaffing damage. These are REALLY IMPORTANT to keep your car at 100%!
Most grommets on vintage VWs are cracked or simply missing!
|
|
|
|
|
|
|
|
|
|
|
Rubber Grommet, 1" ID x 1.750" OD, EACH
|
Price: $2.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Rubber Grommet, 1" ID x 1.750" OD, EACH is used where objects have to route through a piece of metal. The grommet prevents chaffing damage. These are REALLY IMPORTANT to keep your car at 100%!
Most grommets on vintage VWs are cracked or simply missing!
|
|
|
|
|
|
|
|
|
|
Inline Fuse Holder, All Models with Reverse Lights, 1967-79, 111-937-091A-111-848
|
|
|
Inline Fuse Holder, All Models with Reverse Lights, 1967-79, 111-937-091A-111-848 is a replacement fuse holder for the one that got burned, or lost. These are often in really corroded condition, the heat from sitting in the engine bay has taken a toll! These are also a great item to have when adding electrical accessories, so you can properly fuse the circuit in case of a short so you don't burn up your wiring!
|
|
|
|
|
|
|
|
|
|
Antenna, Cowl Mount (Angle Mount, NON-retractable), 1968-79 Beetle and 1980-91 Vanagon, 251-035-503A or 251-901-900
|
Price: $24.95
SALE ITEM! use code TOOMANY30
|
|
|
Antenna, Cowl Mount (Angle Mount), 1967-79 Beetle and 1980-91 Vanagon, 251-035-503A or 251-901-900 slips in from the under side, and the nut and collar tighten from above, sandwiching the VW Beetle or Vanagon Body in between! Normally this is located on the body in front of the door hinges, next to the windshield. Does not fit Karmann Ghia!
|
|
|
|
|
|
|
|
|
|
Waterproof Accessory Socket, 12 Volt with Fuse, Low Profile
|
Price: $24.95
SALE ITEM! use code TOOMANY30
|
|
|
Waterproof Accessory Socket, 12 Volt with Fuse, Low Profile is a high quality part that we have tested on our own cars! So many of these are cheap junk, as usual we pre-screened this part so you get what you expect! 15A fuse and fuse holder is included! The 90 degree back side means you have a shallow mounting depth for those tight installation possibilities, like rear door panels!
|
|
|
|
|
|
|
|
|
|
Antenna, Dual Side Mount (Chrome Mounts), for 1953-66 Beetle, and 1950-67 Type 2, 111-901-900
|
Price: $29.95
SALE ITEM! use code TOOMANY30
|
|
|
Antenna, Dual Side Mount, Chrome, 1953-66 Beetle, and 1950-67 Type 2, 111-901-900 slips into 2 separeate small holes, with the nuts tightening from the back side of the mounting panel. This is a nice reproduction antenna. Comes with the gasket too! Normally this is located on the front quarter panel of the Beetle and Thing, or just in front of the door hinges on the Bus.
|
|
|
|
|
|
|
|
|
|
Antenna, Cowl Mount (Angle Mount, Fully Retractable), 1968-79 Beetle and 1980-91 Vanagon, 113-999-900
|
Price: $29.95
SALE ITEM! use code TOOMANY30
|
|
|
Antenna, Cowl Mount (Angle Mount, Fully Retractable), 1968-79 Beetle and 1980-91 Vanagon, 113-999-900 slips in from the under side, and the nut and collar tighten from above, sandwiching the VW Beetle or Vanagon Body in between! Normally this is located on the body in front of the door hinges, next to the windshield. Does not fit Karmann Ghia!
This antenna is fully collapsible, unlike the more commonly available unit. This one is much less likely to be damaged or broken.
|
|
|
|
|
|
|
|
|
|
Quick Change Ratchet Wire Crimping Tool, 6 Pieces, T3001
|
|
|
Quick Change Ratchet Wire Crimping Tool, 6 Pieces, T3001 includes 5 Chrome Moly Zinc-plated Dies, Carbon Steel Ratchet Tool, and a hard plastic storage case. This is the best crimping tool we've ever used, it does insulated and non-insulated terminals, open barrel terminals, and even spark plug wires! Stop crimping wires with channel locks and vice-grips, and use a REAL WIRE CRIMPER! Terminal pulled out? Spark plug wire end keeps coming off? Need to shorten your coil wire? NO PROBLEM!
We use this wire crimper here at ACN, and after decades of using the cheap wire crimpers, we'll never go back!
|
|
|
|
|
|
|
|
|
|
Main Wiring Harness, 1964-67 Type 2 (All Models), WM-211-6467
|
|
|
Main Wiring Harness, 1964-67 Type 2 (All Models), WM-211-6467 is made from original wiring loom schematics and is factory color coded. This is the MAIN HARNESS that runs from the fusebox in the front, to the engine and tail lights in the rear. This is ideal for doing engine wiring, or to repair engine fire damage.
This is a high quality made in USA exact reproduction of the original German VW wiring harness, it will match the VW Factory diagram and color is coded to the factory stock specifications, so you will be able to reference your Bentley Manual!
|
|
|
|
|
|
|
|
|
|
|
Main Wiring Harness, 1958-63 Type 2 (All Models), WM-211-5863
|
|
|
Main Wiring Harness, 1958-63 Type 2 (All Models), WM-211-5863 is made from original wiring loom schematics and is factory color coded. This is the MAIN HARNESS that runs from the fusebox in the front, to the engine and tail lights in the rear. This is ideal for doing engine wiring, or to repair engine fire damage.
This is a high quality made in USA exact reproduction of the original German VW wiring harness, it will match the VW Factory diagram and color is coded to the factory stock specifications, so you will be able to reference your Bentley Manual!
|
|
|
|
|
|
|
|
|
|
|
Main Wiring Harness, 1968-69 Type 2 (All Models), WM-211-6869
|
|
|
Main Wiring Harness, 1968-69 Type 2 (All Models), WM-211-6869 is made from original wiring loom schematics and is factory color coded. This is the MAIN HARNESS that runs from the fusebox in the front, to the engine and tail lights in the rear. This is ideal for doing engine wiring, or to repair engine fire damage.
|
|
|
|
|
|
|
|
|
|
|
Main Wiring Harness, 1970-71 Type 2 (All Models), WM-211-7071
|
|
|
Main Wiring Harness, 1970-71 Type 2 (All Models), WM-211-7071 is made from original wiring loom schematics and is factory color coded. This is the MAIN HARNESS that runs from the fusebox in the front, to the engine and tail lights in the rear. This is ideal for doing engine wiring, or to repair engine fire damage.This is a high quality made in USA exact reproduction of the original German VW wiring harness, it will match the VW Factory diagram and color is coded to the factory stock specifications, so you will be able to reference your Bentley Manual!
|
|
|
|
|
|
|
|
|
|
|
VW Wiring Harness Kit, 1966-67 Type 2, WK-213-6667
|
|
|
VW Wiring Harness Kit, 1966-67 Type 2, WK-213-6667 is made from original wiring loom schematics and is factory color coded. Fit's Kombi, Bus, Single Cab, Crew Cab, Camper, etc that have the Voltage Regulator mounted on the Bus Body. This is a high quality made in USA exact reproduction of the original German VW wiring harness, it will match the VW Factory diagram and color is coded to the factory stock specifications, so you will be able to reference your Bentley Manual! It will also work with either 6 or 12 volt systems.
All wires are factory length and pre-terminated with either original style soldered dipped wire ends.
|
|
|
|
|
|
|
|
|
|
|
Main Wiring Harness, 1972 Type 2 (All Models), WM-211-1972
|
|
|
Main Wiring Harness, 1972 Type 2 (All Models), WM-211-1972 is made from original wiring loom schematics and is factory color coded. This is the MAIN HARNESS that runs from the fusebox in the front, to the engine and tail lights in the rear. This is ideal for doing engine wiring, or to repair engine fire damage.This is a high quality made in USA exact reproduction of the original German VW wiring harness, it will match the VW Factory diagram and color is coded to the factory stock specifications, so you will be able to reference your Bentley Manual!
|
|
|
|
|
|
|
|
|
|
|
VW Wiring Harness Kit, 1964 Type 2, WK-213-1964
|
|
|
VW Wiring Harness Kit, 1964 Type 2, WK-213-1964 is made from original wiring loom schematics and is factory color coded. Fit's Kombi, Bus, Single Cab, Crew Cab, Camper, etc that have the Voltage Regulator mounted on the Bus Body. This is a high quality made in USA exact reproduction of the original German VW wiring harness, it will match the VW Factory diagram and color is coded to the factory stock specifications, so you will be able to reference your Bentley Manual! It will also work with either 6 or 12 volt systems.
All wires are factory length and pre-terminated with either original style soldered dipped wire ends.
|
|
|
|
|
|
|
|
|
|
|
VW Wiring Harness Kit, 1965 Type 2, WK-213-1965
|
|
|
VW Wiring Harness Kit, 1965 Type 2, WK-213-1965 is made from original wiring loom schematics and is factory color coded. Fit's Kombi, Bus, Single Cab, Crew Cab, Camper, etc that have the Voltage Regulator mounted on the Bus Body. This is a high quality made in USA exact reproduction of the original German VW wiring harness, it will match the VW Factory diagram and color is coded to the factory stock specifications, so you will be able to reference your Bentley Manual! It will also work with either 6 or 12 volt systems.
All wires are factory length and pre-terminated with either original style soldered dipped wire ends.
|
|
|
|
|
|
|
|
|
|
|
VW Wiring Harness Kit, 1958-63 Type 2, WK-213-5863
|
|
|
VW Wiring Harness Kit, 1958-63 Type 2, WK-213-5863 is made from original wiring loom schematics and is factory color coded. Fit's Kombi, Bus, Single Cab, Crew Cab, Camper, etc that have the Voltage Regulator mounted on the Generator. This is a high quality made in USA exact reproduction of the original German VW wiring harness, it will match the VW Factory diagram and color is coded to the factory stock specifications, so you will be able to reference your Bentley Manual! It will also work with either 6 or 12 volt systems.
All wires are factory length and pre-terminated with either original style soldered dipped wire ends.
|
|
|
|
