OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Engine Parts > Oil System > Oil Fillers, Towers, & Dipsticks
28 products found
Sort By:
1
Dipstick Oil Temperature Gauge Thermometer, Upright Engines
Dipstick Oil Temperature Gauge Thermometer, Upright Engines
Price: $109.95

Dipstick Oil Temperature Gauge Thermometer, Upright Engines was developed by one of our customers for an easy to install, and accurate, oil temperature gauge for the upright Type 1 engine. This is NOT a $15 Meat Thermometer from Target/Wal-Mart, it is made by Tel Tru Mfg, a manufacturer of world class thermometers!

This gauge is accurate to +-2 degrees Fahrenheit! This fits into the stock dipstick tube, replacing the stock dipstick. The gauge face is scaled from 50-300F for ultra-accurate readings. If you want an easy to install oil temperature gauge, this is it!

 more info
Bugpack Complete Chrome Engine Dress Up Kit
Bugpack Complete Chrome Engine Dress Up Kit
Price: $87.95

Chrome parts are; Oil Cap, Alternator/Generator Nut & Washer, Crank Pulley Nut, Distribtor Clamp, Oil Dipstick, Oil Breather/Filler Assembly w/Downtube, 12V Alt/Gen Pulley, Strap, & Backing Plate, (2) Valve Covers and Bails. more info
Oil Temperature Warning Dipstick, 235F Calibrated Alert, 1972-79 Type 4 Engines (Does NOT fit Vanagon Engine)
Oil Temperature Warning Dipstick, 235F Calibrated Alert, 1972-79 Type 4 Engines (Does NOT fit Vanagon Engine)
Price: $49.95

Oil Temperature Warning Dipstick, 235F Calibrated Alert, 1972-79 Type 4 Engines (Does NOT fit Vanagon Engine) is an easy and inexpensive way to be alerted by overheated oil temperatures! At 225F the light will flicker, and at 235F the light goes on steady! There are several ways to wire this. The most common and easiest usage is to wire parallel with the stock oil pressure warning light (Green light on the dash). The kit comes with the wires and connectors to do this. If you want a nicer installation, you have to run a wire from the dash to the engine, and you can then use this wire to give you a visual (warning light), audio (warning buzzer), or both!

This unit fits into the stock dipstick tube, replacing the stock dipstick. If you want an easy to install oil temperature gauge, this is it!

This version fits Type 4 engines, which include the 1972-79 Bus with the Type 4 Engines in North America. If you have an Upright Type 1 Engine, we have a different unit for those, and "Shorty" versions which are 1/8 NPT, typically custom install locations, or for installation at the Type 3 Oil Filler Block Off location on Universal Cases.

 more info
How to Modify Volkswagen Beetle Chassis, Suspension, & Brakes for High Performance, by James Hale, 1-903706-99-8
How to Modify Volkswagen Beetle Chassis, Suspension, & Brakes for High Performance, by James Hale, 1-903706-99-8
Price: $49.95

How to Modify Volkswagen Beetle Chassis, Suspension, & Brakes for High Performance, by James Hale, 1-903706-99-8 is a GREAT BOOK! Doesn't cover any engine stuff, but is fantastic for brakes and suspension work, even though all the pics are in B & W. more info
Bugpack Deluxe Chrome Engine Dress Up Kit
Bugpack Deluxe Chrome Engine Dress Up Kit
Price: $44.95

More complete than our Basic kit! Chrome parts are; Oil Cap, Alternator/Generator Nut & Washer, Crank Pulley Nut, Distribtor Clamp, Oil Dipstick, Oil Breather/Filler Assembly w/Downtube, and a Chrome 12V Alternator/Generator Pulley. more info
Oil Temperature Warning Dipstick, 235F Calibrated Alert, Upright Engines
Oil Temperature Warning Dipstick, 235F Calibrated Alert, Upright Type 1 Engines
Price: $39.95

Oil Temperature Warning Dipstick, 235F Calibrated Alert, Upright Engines is an easy and inexpensive way to be alerted by overheated oil temperatures! At 225F the light will flicker, and at 235F the light goes on steady! There are several ways to wire this. The most common and easiest usage is to wire parallel with the stock oil pressure warning light (Green light on the dash). The kit comes with the wires and connectors to do this. If you want a nicer installation, you have to run a wire from the dash to the engine, and you can then use this wire to give you a visual (warning light), audio (warning buzzer), or both!

This unit fits into the stock dipstick tube, replacing the stock dipstick. If you want an easy to install oil temperature gauge, this is it!

This version fits upright Type 1 engines, which were in all Beetles and Ghias, as well as in Bus models up through the year 1971 (in North America). We have a different unit for Type 4 engines (which were in the later model Busses), and "Shorty" versions which are 1/8 NPT, typically custom install locations, or for installation at the Type 3 Oil Filler Block Off location on Universal Cases.

 more info
K&N Steel Base Vent with Chrome Top
K&N Steel Base Vent with Chrome Top
Price: $29.95

Baby Breather by K&N, has a small inlet on bottom, and a chrome top. more info
Oil Filler Nut Removal Tool, Deluxe Model
Oil Filler Nut Removal Tool, Deluxe Model
Price: $24.95

Oil Filler Nut Removal Tool, Deluxe Model makes this job, which is normally a royal pain in the butt, an easy endeavor! Cam Lock operation with sharp teeth, tighten INSIDE the nut, instead of trying to grab the useless "slot" that the cheaper tools do! This slick tool uses rotational leverage to GRIP the INSIDE of the filler nut so you can spin stubborn filler nuts loose. The $8 tool sucks and doesn't last long, this one is great!

ACN Tip: use a single port intake manifold gasket instead of that useless paper one that you are SUPPOSED to use, and your stock oil filler tower will stop leaking!

 more info
Oil Dipstick Tube Boot, 1962-74 Type 3, 311-115-329B-311-329B
Oil Dipstick Tube Boot, 1962-74 Type 3, 311-115-329B-311-329B
Price: $24.95

Oil Dipstick Tube Boot, 1962-74 Type 3, 311-115-329B-311-329B is often cracked or split, leaking oil all over the driveway under your car! Keep the oil in and the dirt out by replacing that boot with this new one! more info
Sand Seal Dipstick, Type 1 Engines, 6162-25
Sand Seal Dipstick, Type 1 Engines, 6162-25
Price: $24.95

Sand Seal Dipstick, Type 1 Engines, 6162-25 has a positive seal against the case's dipstick guide tube, to prevent ANYTHING from getting in or out of the dipstick tube! Prevents pesky oil leaks from coming out, or sand and dirt from getting in! more info
Bugpack Basic Chrome Engine Dress Up Kit
Bugpack Basic Chrome Engine Dress Up Kit
Price: $21.95

An inexpensive assortment of chrome items to put on your VW Beetle engine to set it apart from plain stock ones! Chrome parts are; Oil Cap, Alternator/Generator Nut & Washer, Crank Pulley Nut, Distribtor Clamp, and Oil Dipstick. more info
Billet Aluminum Dipstick, Type 1 Engines
Billet Aluminum Dipstick, Type 1 Engines
Price: $12.95

Billet Aluminum Dipstick, Type 1 Engines really dresses up your engine with a normally "Boring" part, with this unique part! Aluminum handle is also easier to hold when HOT. more info
AN Fitting, Male, Aluminum, Weld-On - 10 AN, 5100-00085
AN Fitting, Male, Aluminum, Weld-On - 10 AN, 5100-00085
Price: $11.95

AN Fitting, Male, Aluminum, Weld-On - 10 AN, 5100-00085 is placed into a hole you drill, then you weld or braze it into place. This allows you to connect a -10 Hose End to the fitting to the bung, for a leak-free and reusable connection. more info
Oil Filler Nut Removal Tool, Economy
Oil Filler Nut Removal Tool, Economy
Price: $11.95

This tool is useful to remove/install the nut that holds the oil filler and breather tin onto the generator/alternator stand. This is our "Economy" version, which can strip if you have a stubborn Filler Nut. Our Deluxe Tool is bulletproof! more info
Silicone Oil Filler Cap Gasket (Oil Cap Gasket), 1953-74 Type 1s, 1955-71 Type 2s, and all Type 3s, EACH, VW-3
Silicone Oil Filler Cap Gasket (Oil Cap Gasket), 1953-74 Type 1s, 1955-71 Type 2s, and all Type 3s, EACH, VW-3
Price: $11.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Silicone Oil Filler Cap Gasket (Oil Cap Gasket), 1953-74 Type 1s, 1955-71 Type 2s, and all Type 3s, EACH, VW-3 is a replacement gasket for the oil cap on your VW. Cork gaskets are often cracked or missing and results in pesky oil leaks, which this one solves! It's an inexpensive fix, takes seconds too! more info
Oil Filler Tube Inside Nut, Holds Tower to Generator or Alternator Stand, 111-115-495
Oil Filler Tube Inside Nut, Holds Tower to Generator or Alternator Stand, 111-115-495
Price: $9.95

Oil Filler Tube Inside Nut, Holds Tower to Generator or Alternator Stand, 111-115-495 is that hard to find nut that holds the stock oil filler tube to the generator stand or alternator stand. These are often FUBARed by guys trying to remove or tighten it! more info
AN Fitting, Male, Weld-On, -10 AN
AN Fitting STEEL, Male, Weld-On, -10 AN
Price: $9.95

This steel bung is placed into a hole you drill, then you weld or braze it into place. This allows you to connect a -10 Hose End to the fitting to the bung, for a leak-free and reusable connection. more info
AN Fitting, Male, Aluminum, Weld-On - 8 AN, 5100-00084
AN Fitting, Male, Aluminum, Weld-On - 8 AN, 5100-00084
Price: $9.95

AN Fitting, Male, Aluminum, Weld-On - 8 AN, 5100-00084 is placed into a hole you drill, then you weld or braze it into place. This allows you to connect a -8 Hose End to the fitting to the bung, for a leak-free and reusable connection. more info
Chrome Stock Oil Cap, Type 1 Engines, 4535-20
Chrome Stock Oil Cap, Type 1 Engines, 4535-20
Price: $5.95

Chrome Stock Oil Cap, Type 1 VW Engines, 4535-20 in a Chrome version. Will fit all Type 1 Upright Aircooled VW engines. more info
Chrome Dipstick, Stock Length Type 1
Chrome Dipstick, Stock Length Type 1
Price: $4.95

Chrome Dipstick for upright VW engines, dresses it up nicely! more info
Stock Dipstick, Upright Engines, Stock Length Type 1, 113-115-611
Stock Dipstick, Upright Engines, Stock Length Type 1, 113-115-611
Price: $4.95

Stock Dipstick, Upright Engines, Stock Length Type 1, 113-115-611 will replace that mangled or missing dipstick that you drove over or lost! 2 Lines, "Add" and "Full", should be checked regularly, since stock engines only hold 2.5 quarts of oil!

 more info
Hose Barb, 1/2" Hose x 3/8" NPT Male, EACH
Low Pressure Hose Barb Fitting, 1/2" Hose x 3/8" NPT Male, EACH
Price: $3.95

This is a single 1/2" Hose Barb which fit holes that are tapped to 3/8" NPT. This is a low pressure compatible barb, best used for breather hoses and vacuum hoses (power brakes). We prefer to use this with the 12mm cloth braided hose. You may need 45 or 90 degree fittings to route the hoses without kinks!

This is the same barb we use when installing a fitting in the intake manifold for the power brake vacuum hose. more info
Oil Strainer Gasket Kit (Oil Change Gaskets), Type 4 Engines, 021-198-031
Oil Strainer Gasket Kit (Oil Change Gaskets), Type 4 Engines, 021-198-031
Price: $3.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Oil Strainer Gasket Kit (Oil Change Gaskets), Type 4 Engines, 021-198-031 are a must to keep in the garage. We only sell top quality gaskets, these do not weep or leak like the cheap imported gaskets do! One of these gaskets goes on either side of the strainer.

 more info
Oil Strainer Gasket Kit, 25hp Engines, EACH, 111-115-031
Oil Strainer Gasket Kit, 25hp Engines, EACH, 111-115-031
Price: $3.00

Oil Strainer Gasket Kit, 25hp Engines, EACH, 111-115-031 more info
Oil Strainer Gasket Kit, German, 36hp Engines, EACH, 111-198-031
Oil Strainer Gasket Kit, 36hp Engines, EACH, 111-198-031
Price: $2.75

Oil Strainer Gasket Kit, 36hp Engines, EACH, 111-198-031 are a must to keep in the garage. We sell only the best available quality gaskets. Cheap gaskets leak and weep. One of these gaskets goes on either side of the strainer. This kit includes 2 gaskets, and 6 sump nut gaskets. more info
Universal Crankcase Ventilation Fitting for Air Filters, Fits 1/2" (12mm) Hose
Universal Crankcase Ventilation Fitting for Air Filters (EACH), Fits 1/2" (12mm) Hose
Price: $2.50

Universal Crankcase Ventilation Fitting for Air Filters, Fits 1/2" (12mm) Hose gives you a way to route your engine's blow-by into your air cleaner(s) to keep the engine clean and running properly. Simply drill a hole in the air filter and mount this fitting, then you have a place to route your crankcase breather hoses! This ventilates your crankcase, and prevents sucking in unfiltered air during high vacuum conditions like deceleration.

You can use one in one filter, or one in each filter and T the hoses to even the distribution.

 more info
Oil Breather Tower Gasket, Type 4 Engines, EACH, 021-115-487
Oil Breather Tower Gasket, Type 4 Engines, EACH, 021-115-487
Price: $2.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Oil Breather Tower Gasket, Type 4 Engines, EACH, 021-115-487 sit on the top of the breather tower, beneath the breather vent which clips on top. These are good to have in the garage, you'll replace them periodically.

 more info
Oil Strainer Gasket Kit, German, 40hp-1600cc Engines, 113-198-031
Oil Strainer Gasket Kit, GERMAN, 40hp-1600cc Engines, 113-198-031
Price: $1.75

Oil Strainer Gasket Kit, German, 40hp-1600cc Engines, 113-198-031 are a must to keep in the garage. We only sell top quality gaskets, these do not weep or leak like the cheap imported gaskets do! One of these gaskets goes on either side of the strainer. This kit includes 2 gaskets, 6 sump nut gaskets, and the drain plug gasket. more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.