|
|
|
|
|
|
Rear Axle Seal, IRS Beetle and Super Beetle, Karmann Ghia, Thing, and Type 3, 113-501-315H
|
|
|
Rear Axle Seal, IRS Beetle and Super Beetle, Karmann Ghia, Thing, and Type 3, 113-501-315H is used to seal the rear wheel bearings and stub axles on IRS Type 1s and 3s. There are TWO needed per wheel (Inner and Outer), when changing wheel bearings.
|
|
|
|
|
|
|
|
|
|
36mm Socket for Gland Nut and Axle Nut, 5770/7037
|
|
|
This 1/2" drive 36mm Socket can be used to remove Type 1&3 gland nuts and axle nuts. High Quality tool for repeated use.
|
|
|
|
|
|
|
|
|
|
Rear Axle Nut, 36mm, 1967+ Type 1 & 3, 311-501-221HD
|
|
|
Rear Axle Nut, 36mm, 1967+ Type 1 & 3, 311-501-221HD is the nut that retains your rear brake drum. These MUST be torqued to spec or tighter, or the drum can come loose and really ruin your day. A tight axle nut saves brake drums!
|
|
|
|
|
|
|
|
|
|
36mm Axle Nut Removal/Installation Tool
|
|
|
These "Bang" type axle nut removal/installation tools are NOT the preferred method to remove/install the axle nut since they hammer the rear wheel bearing, but they work good enough in the field to get you home!
|
|
|
|
|
|
|
|
|
|
Wheel Bearing (Axle Bearing), Rear Inner, IRS Type 1 and 3, 113-501-283
|
|
|
Wheel Bearing (Axle Bearing), Rear Inner, IRS Type 1 and 3, 113-501-283 is a high quality rear wheel bearing. These take tremendous abuse by most owners, never EVER servicing nor greasing them! It's a miracle they last as long as they do!
|
|
|
|
|
|
|
|
|
|
|
Wheel Bearing (Axle Bearing), Rear Outer, IRS Type 1 and 3, 113-501-277A
|
|
|
Wheel Bearing (Axle Bearing), Rear Outer, IRS Type 1 and 3, 113-501-277A is a high quality rear wheel bearing. These take tremendous abuse by most owners, never EVER servicing nor greasing them! It's a miracle they last as long as they do!
|
|
|
|
|
|
|
|
|
|
Chromoly Axle Spacers, IRS Type 1, 6 Pieces
|
|
|
Stock axle spacers are notoriously weak, and also "groove" from the axle seal, and this causes perpetual leaks that you can never seem to fix no matter how many times you try! This version is stock width for all IRS Rear Suspensions.
|
|
|
|
|
|
|
|
|
|
Axle & Gland Nut Leverage Tool (Buddy Bar)
|
|
|
This tool is used to hold 200 and 180mm flywheels AND 4 or 5 lug brake drums from turning when tightening/loosening. Doesn't risk case breakage (the case ears) like a standard flywheel lock. This is a great tool to have around the garage for the do-it-yourselfer. This tool eliminates the need for an assistant when tightening or loosening rear axle nuts, or the flywheel gland nut. This tool is strong enough to withstand over 2x the recommended torque spec. Bolt pattern fits both 180 and 200mm flywheels, AND both 4 lug and 5 lug brake drums! Also fits 5 x 130mm Small-5 Bus & Vanagon Brake Drums!
|
|
|
|
|
|
|
|
|
|
Flywheel and Brake Drum Torque Tool Kit, 36mm Gland Nut and Axle Nuts
|
|
|
Flywheel and Brake Drum Torque Tool Kit, 36mm Gland Nut and Axle Nuts is used to tighten and loosen the flywheel gland nut, and 36mm Axle Nuts at the brake drum! This was initially introduced under the "Torque-meister" brand name years ago. Mechanical advantage (leverage) makes seemingly impossibly tight nuts come off WITH EASE! Accurate too! This is a great tool to have around the garage for the do-it-yourselfer. This tool eliminates the need for an assistant when tightening or loosening rear axle nuts, or the flywheel gland nut. If you've ever used this, you realize it's a MUST in the garage of the Vee-Dubber!This tool comes with 2 pinion gears, for both 6V/180mm flywheels, AND 12V/200mm flywheels!
|
|
|
|
