Excellent Strut Insert for Superbeetles!

KYB Shocks are sold per EACH, you need 2 to do one axle.

1973 1/2+ 2-Bolt struts use 2 bolts to attach the strut housing to the Spindle and Ball Joint Assembly. 1971-1973 1/2 3-Bolt struts use 3 bolts to attach the strut housing to the Spindle and Ball Joint Assembly.

This part fits from Vin 1x3 3003 656

This part fits to Vin 1x3 3003 655.

Excellent Strut Insert for Superbeetles!

KYB Shocks are sold per EACH, you need 2 to do one axle.

1973 1/2+ 2-Bolt struts use 2 bolts to attach the strut housing to the Spindle and Ball Joint Assembly. 1971-1973 1/2 3-Bolt struts use 3 bolts to attach the strut housing to the Spindle and Ball Joint Assembly.

If you have a Super Beetle and want it to handle, YOU NEED THIS!

This product is a simple installation that simply that ties the front strut towers together (it triangulates them), giving your Super Beetle a tighter, more rigid front suspension by dramatically reducing chassis deflection. You will IMMEDIATELY notice quicker steering response, improved stability and more consistent alignment. Made in USA!

This strut tower brace is a new product for strengthening the Super Beetle's weak front end structure. Bar is made from high quality polished 6061 T6 aluminum. End pieces are laser cut and powder coated with an attractive silver finish. Mounting hardware is in included. We recommend that this bar be installed with our urethane lower control arm bushings for best results.

If your car is suffering from the "Super Beetle Shimmy", make sure that the suspension is repaired properly BEFORE installing this item. We DO NOT make any claims that this device will stop your shimmies on its own merit. However, it will add a feeling of stability and quietness over rough roads and turns that you can feel!

This product is a simple installation that simply that ties the front strut towers together (it triangulates them), giving your Super Beetle a tighter, more rigid front suspension by dramatically reducing chassis deflection. You will IMMEDIATELY notice quicker steering response, improved stability and more consistent alignment. Made in USA!

This strut tower brace is a new product for strengthening the Super Beetle's weak front end structure. Plasma cut steel side plates are fixture drilled for perfect fit.

The crossmember is 6061-T6 heavy wall aluminum for maximum strength. Spacer washers and all hardware are supplied to fit the bar to your chassis perfectly. We recommend that this bar be installed with our urethane lower control arm bushings for best results.

If your car is suffering from the "Super Beetle Shimmy", make sure that the suspension is repaired properly BEFORE installing this item. We DO NOT make any claims that this device will stop your shimmies on its own merit. However, it will add a feeling of stability and quietness over rough roads and turns that you can feel!

1" Lowered Tapered Super Beetle Strut Springs (Sport Springs), Pair, 87-0308 are a huge improvement compared to anything else! Tapered design gives more clearance for wider wheels and tires. Progressive spring rate prevents bottoming, while actually providing a slight lowering too!

Tapered Super Beetle Strut Springs (1" Lift Springs, Rally Springs, Baja Springs), Pair, 87-0307 are a huge improvement on anything else available! Tapered design gives more clearance for wider wheels and tires. Progressive spring rate prevents bottoming the suspension

These are perfect for stock convertibles (with the additional weight), electric car conversions (battery bank in trunk), or even subaru engine conversions where you are putting the radiator in the front!

This new coil-over design with small 75mm spring gives maximum wheel and tire clearance for larger 16, 17, and 18 inch wheels. Wheels must have a minimum 5 1/2 inch back spacing for best results. Supplied with adjustable ride height housings, gas shock inserts, springs, billet aluminum spring holders, red street sport springs, and closing nut. As an additional benefit, these have a significantly reduced weight of the new spring and components, which knowledgeable VW enthusiasts know results in less un-sprung weight. Less un-sprung weight means better ride, and better handling!

You do re-use your original top bearing mounts.

Your installation will require careful planning, as the kit will only work with rims with 5 1/2 to 6 inch back spacing (approximately 50 to 55mm offset). Longer wheel studs and wheel spacers will probably be necessary.