OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Suspension - Front > Beetle & Ghia, 1946-65
126 products found
SUBCATEGORIES:
Axle Beams & Beam Assemblies Performance and Lowering
Shocks Spindles, King/Link Pin Kits
Steering Box & Parts Tie Rod Assemblies and Ends
Wheel Bearings & Grease Seals
Sort By:
1 2 3
Front Disc Brake Kit, Link Pin Beetle and Ghia, 2" Lowered, 5 x 130mm Studded
Front Disc Brake Kit, Link Pin Beetle and Ghia, 2" Lowered, 5 x 130mm Studded
Price: $769.95

Front Disc Brake Kit, Link Pin Beetle and Ghia, 2" Lowered, 5 x 130mm Studded is a HUGE Upgrade to the stock braking system, which is borderline tolerable when operating properly. This kit accomplishes a brake upgrade AND that lowering job you wanted, and does so with pre-studded disc brake rotors so you can put those Porsche Patterned Wheels on at the same time! more info
Spindle to Spindle Front Axle Beam, Stock Height, 1949-65 Type 1 (Link Pin, Drum Brakes), 111-400-401A
Spindle to Spindle Front Axle Beam, Stock Height, 1949-65 Type 1 (Link Pin, Drum Brakes), 111-400-401A
Price: $529.95

Spindle to Spindle Front Axle Beam, Stock Height, 1949-65 Type 1 (Link Pin, Drum Brakes), 111-400-401A is a new axle beam assembly to replace the one you have that is either rusted out or tweaked from an accident or HUGE bump. more info
RLR Single Adjustable 90/10 Front Shocks, Link Pin Type 1 (1965 and Earlier Models), PAIR
RLR Single Adjustable 90/10 Front Shocks, Link Pin Type 1 (1965 and Earlier Models), PAIR
Price: $524.95

RLR Single Adjustable 90/10 Front Shocks, Link Pin Type 1 (1965 and Earlier Models), PAIR allow the front end to move UP easily on the launch for weight transfer to the rear wheels, but settle back down slow enough to keep the weight there until the top end! more info
Front Disc Brake Kit, Link Pin Beetle and Ghia, 2" Lowered, 4 x 130mm
Front Disc Brake Kit, Link Pin Beetle and Ghia, 2" Lowered, 4 x 130mm
Price: $439.95

Front Disc Brake Kit, Link Pin Beetle and Ghia, 2" Lowered, 4 x 130mm is a HUGE Upgrade to the stock braking system, if you have a set of late model 4 bolt wheels you want to use! This kit accomplishes a brake upgrade AND that lowering job you wanted! more info
Rebuilt Type 1 Link Pin Spindle Assemblies (German King and Link Pin Kits), Link Pin, Drum Brakes, Stock Height, PAIR
Rebuilt Type 1 Link Pin Spindle Assemblies (GERMAN King and Link Pin Kits), Link Pin, Drum Brakes, Stock Height, PAIR
Price: $379.95
Price includes $100 Refundable Core Fee

Rebuilt Type 1 Link Pin Spindle Assemblies (German King and Link Pin Kits), Link Pin, Drum Brakes, Stock Height, PAIR takes the hassle out of rebuilding spindles! New German link and king pins are already installed and reamed, then adjusted to factory specs! Just bolt these on and align it! more info
Rebuilt Type 1 Link Pin Spindle Assemblies (Brazilian King and Link Pin Kits), Link Pin, Drum Brakes, Stock Height, PAIR
Rebuilt Type 1 Link Pin Spindle Assemblies (BRAZILIAN King and Link Pin Kits), Link Pin, Drum Brakes, Stock Height, PAIR
Price: $339.95
Price includes $150 Refundable Core Fee

Rebuilt Type 1 Link Pin Spindle Assemblies (Brazilian King and Link Pin Kits), Link Pin, Drum Brakes, Stock Height, PAIR takes the hassle out of rebuilding spindles! New Brazilian link and king pins are already installed and reamed, then adjusted to factory specs! Just bolt these on and align it! more info
Front Axle Beam , Lowered, 1949-65 Type 1 (Link Pin)
Front Axle Beam , Lowered, 1949-65 Type 1 (Link Pin)
Price: $319.95

Front Axle Beam , Lowered, 1949-65 Type 1 (Link Pin) is a new axle beam WITH ADJUSTERS for a lowered front end! This will adjust from stock height to 4" lower. All your components will swap over! Use WITH lowering spindles for more than a 6" drop. more info
Front Axle Beam, Stock, 1949-65 Type 1 (Link Pin), 113-401-021A
Front Axle Beam, Stock, 1949-65 Type 1 (Link Pin), 113-401-021A
Price: $319.95

Front Axle Beam, Stock, 1949-65 Type 1 (Link Pin), 113-401-021A is a new axle beam assembly (with no internals) to rebuild the one you have that is either rusted out or tweaked from an accident or HUGE bump. All your components will swap over! more info
Steering Box, 1962+ Std. Beetle, Ghia, Thing, and Type 3, 113-415-061C
TRW BRAND Steering Box, 1962+ Std. Beetle, Ghia, Thing, and Type 3, 113-415-061C
Price: $259.95

Steering Box, 1962+ Std. Beetle, Ghia, Thing, and Type 3, 113-415-061C is the mechanism that changes the axis of "twisting" from the steering column to one that moves the tie rods. It's also responsible for a leverage change due to gearing. Worn steering boxes have tight and/or loose spots, etc. more info
REBUILT Steering Box, fits 1962+ Std. Beetle, Ghia, Thing, and Type 3, 113-415-061C-RB
REBUILT Steering Box, fits 1962+ Std. Beetle, Ghia, Thing, and Type 3, 113-415-061C-RB
Price: $229.95

REBUILT Steering Box, fits 1962+ Std. Beetle, Ghia, Thing, and Type 3, 113-415-061C-RB is the mechanism that changes the axis of "twisting" from the steering column to one that moves the tie rods. It's also responsible for a leverage change due to gearing. Worn steering boxes have tight and/or loose spots, etc. more info
JAMAR Aluminum Front Axle Beam, Link Pin, Adjustable, No Shock Towers, JBFBNTA
JAMAR Aluminum Front Axle Beam, Link Pin, Adjustable, No Shock Towers, JBFBNTA
Price: $229.95

JAMAR Aluminum Front Axle Beam, Link Pin, Adjustable, No Shock Towers, JBFBNTA is made in the USA, not China! This beautiful axle beam will bolt onto Link Pin Compatible Chassis, and drops MAJOR WEIGHT from the front of your Sand Rail or Buggy! Jamar's Aluminum front beams are the BEST aluminum beams out there, both looks and performance! JAMAR Beams are made with 100% billet aluminum end plates, and are designed for heavy off road use and custom looks. Comes with the 4 required torsion arm bushings too! more info
Prothane Total Suspension Kit, 1959-65 VW Beetle and Ghia, 22-2001 and 22-2001-BL
Prothane Total Suspension Kit, 1959-65 VW Beetle and Ghia, 22-2001 and 22-2001-BL
Price: $219.95

Prothane Total Suspension Kit, 1959-65 VW Beetle and Ghia, 22-2001 and 22-2001-BL is the easy way to purchase all possible components with this all inclusive kit by Prothane! Durable and quiet urethane will last forever, it won't degrade like rubber does! This kit includes front axle beam bushings, front suspension stops, tie rod end boots, inner and outer spring plate grommets, front and rear transmission mounts, steering coupler, and shift coupler. We offer this in Red or Black for the color conscious! This kit is much less # than buying the components separately! more info
2 1/2" Drop Spindles, Fit EMPI 22-2925 Link Pin 5x205 Disc Brake Kit, Pair
2 1/2" Drop Spindles, Fit EMPI 22-2925 Link Pin 5x205 Disc Brake Kit, PAIR
Price: $209.95

2 1/2" Drop Spindles, Fit EMPI 22-2925 Link Pin 5x205 Disc Brake Kit, Pair are used to replace the spindles which somehow got messed up from your EMPI 22-2925 Disc kit! The left side is drilled for the speedometer cable. more info
Whiteline Front Sway Bar, 16mm, ADJUSTBLE, HEAVY DUTY, Link Pin Type 1, BWF16Z
Whiteline Front Sway Bar, 16mm, ADJUSTBLE, HEAVY DUTY, Link Pin Type 1, BWF16Z
Price: $199.95

Whiteline Front Sway Bar, 16mm, ADJUSTBLE, HEAVY DUTY, Link Pin Type 1, BWF16Z is a superb bolt on for the front of your Link Pin Type 1 VW. This can be used with a Rear Sway Bar or Camber Compensator depending on your handling preferences. This is the NLA adjustable version, so you can dial in the stiffness for totally balanced handling! more info
2 1/2" Drop Spindles, Link Pin, Drum Brakes, Pair
2 1/2" Drop Spindles (Cast/Chromoly Hybrid), Link Pin, Drum Brakes, PAIR
Price: $199.95

Our Lowering Spindles are the best possible way to lower the front of your VW Bug or Ghia. Instead of using sketchy welded or fully cast spindles, these Cast/Chromoly Axle hybrid spindles are the best in lieu of forged (which are very difficult to find anymore). Fit all Type 1 Link Pin front ends, and drop is a full 2 1/2"! These spindles use Early 5 Bolt Drums and Bearings. more info
RLR Narrowed Tie Rods, Left and Right SET, 70-500-STRNB
RLR Narrowed Tie Rods, Left and Right SET, 70-500-STRNB
Price: $179.95

RLR Narrowed Tie Rods, Left and Right SET, 70-500-STRNB includes 2 tie rod ends and the tie rod. This is the adjustable version narrowed for your RLR narrowed axle beam, so you can properly align the car.

Tie rod ends are often seized in the tie rod, it's not worth the bother to try to cut and tap (find a Metric left hand tap, let alone use it!), just get these!

Make sure you order these at the same time as your RLR Axle Beam, so they are cut to the proper size to fit your beam! more info
2 1/2" Drop Spindles (Cast/Chromoly Hybrid), Link Pin, Disc Brakes, PAIR
2 1/2" Drop Spindles (Cast/Chromoly Hybrid), Link Pin, Disc Brakes, PAIR
Price: $169.95

2 1/2" Drop Spindles (Cast/Chromoly Hybrid), Link Pin, Disc Brakes, PAIR are are the best possible way to lower the front of your VW Bug or Ghia. Cast with Chromoly Axle. Fit all Type 1 Link Pin front ends, and drop is a full 2 1/2"! Instead of using sketchy welded or fully cast spindles, these Cast/Chromoly Axle hybrid spindles are the best in lieu of forged (which are very difficult to find anymore). Fit all Type 1 Link Pin front ends, and drop is a full 2 1/2"! These spindles use late 4 Bolt Bearings. more info
Whiteline Front Sway Bar, 16mm, Non-Adjustable, 2" Narrowed, Link Pin Type 1, BWF2N2
Whiteline Front Sway Bar, 16mm, Non-Adjustable, 2" Narrowed, Link Pin Type 1, BWF2N2
Price: $159.95

Whiteline Front Sway Bar, 16mm, Non-Adjustable, 2" Narrowed, Link Pin Type 1, BWF2N2 is a superb bolt on for the front of your Link Pin Type 1 VW. This can be used with a Rear Sway Bar or Camber Compensator depending on your handling preferences. It's tough finding a narrowed Sway Bar, Aircooled.Net has them! more info
Narrowed 3/4" Swaybar, Lowered, Link Pin Type 1
Narrowed 3/4" Swaybar, Lowered, Link Pin Type 1
Price: $134.95

Awesome! Swaybar for your 2-3" narrowed axle beam, so you don't have to give up your handling when you got your tire clearance!  This kit includes the swaybar, the urethane bushings, and Stainless Steel clamps! more info
NEW OEVW Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, 111-405-302OEVW
NEW OEVW Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, 111-405-302OE
Price: $119.95

NEW OEVW Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, 111-405-302OEVW to replace that one that is missing or damaged! Don't forget you should consider new king and link pin bushings at the same time as the installation of this!
 more info
Koni Adjustable FRONT Shock Absorber, Link Pin Type 1 and 2, AND 1961-68 Type 3, EACH, 80-1349
Koni Adjustable FRONT Shock Absorber, Link Pin Type 1 and 2, AND 1961-68 Type 3, EACH, 80-1349
Price: $119.95

Koni Adjustable FRONT Shock Absorber, Link Pin Type 1 and 2, AND  1961-68 Type 3, EACH, 80-1349 are a fully adjustable oil shock, so you can set the damping for your car and your ride preference! These are the finest shocks available for street or race! more info
Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, Each, 111-405-302
NEW Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, EACH, 111-405-302
Price: $119.95

Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, Each, 111-405-302 is a new part to replace that one that is missing or damaged! Don't forget you should consider new king and link pin bushings at the same time as the installation of this!
 more info
Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, LEFT, Each, 111-405-301
NEW Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, LEFT, EACH, 111-405-301
Price: $119.95

Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, LEFT, Each, 111-405-301 is a new part to replace that one that is missing or damaged! Don't forget you should consider new king and link pin bushings at the same time as the installation of this!
 more info
HD Front 3/4" Swaybar Kit, 1965 and Earlier Lowered Type 1
HD Front 3/4" Swaybar Kit, 1965 and Earlier LOWERED Type 1
Price: $119.95

ACN Recommended! HD 3/4" Front Swaybar really tightens up the handling of your VW Beetle! Comes with 4 Urethane Swaybar Bushings, and uses stock clamps, thought we STRONGLY recommend our SS Clamp Kit. more info
Link Pin Set, German, 1949-65 Type 1, 111-498-051A
Link Pin Set, GERMAN, 1949-65 Type 1, 111-498-051AGR
Price: $104.95

Link Pin Set, German, 1949-65 Type 1, 111-498-051A is needed on most old VW Beetles and Ghias, since nobody bothers changing these, they just drive the car until it falls apart! This kit will do both sides of the front axle assembly. High quality! more info
HD Front 3/4" Swaybar Kit, 1965 and Earlier Type 1
HD Front 3/4" Swaybar Kit, 1965 and Earlier Type 1
Price: $99.95

ACN Recommended! HD 3/4" Front Swaybar really tightens up the handling of your VW Beetle! Comes with 4 Urethane Swaybar Bushings, and uses stock clamps, though we STRONGLY recommend our SS Clamp Kit. more info
REBUILT Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, Each, 111-405-302X/RB
REBUILT Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, EACH, 111-405-302X/RB
Price: $89.95

REBUILT Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, RIGHT, Each, 111-405-302X/RB is a refurbished part to replace that one that is missing or damaged! Don't forget you should consider new king and link pin bushings at the same time as the installation of this! more info
REBUILT Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, LEFT, Each, 111-405-301X/RB
REBUILT Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, LEFT, EACH, 111-405-301X/RB
Price: $89.95

REBUILT Stock Spindle (Steering Knuckle), Link Pin, Drum Brakes, LEFT, Each, 111-405-301X/RB is a refurbished part to replace that one that is missing or damaged! Don't forget you should consider new king and link pin bushings at the same time as the installation of this! more info
Stock Steering Knuckle Link (Steering Carrier), Link Pin, LEFT, Each, 111-405-351
Stock Steering Knuckle Link (Steering Carrier), Link Pin, LEFT, EACH, 111-405-351
Price: $89.95

Stock Steering Knuckle Link (Steering Carrier), Link Pin, LEFT, Each, 111-405-351 is a new part to replace that one that is missing or damaged! Don't forget you should consider new king and link pin bushings at the same time as the installation of this, since this item arrives with NO BUSHINGS installed.
 more info
Stock Steering Knuckle Link (Steering Carrier), Link Pin, RIGHT, Each, 111-405-352
Stock Steering Knuckle Link (Steering Carrier), Link Pin, RIGHT, EACH, 111-405-352
Price: $89.95

Stock Steering Knuckle Link (Steering Carrier), Link Pin, RIGHT, Each, 111-405-352 is a new part to replace that one that is missing or damaged! Don't forget you should consider new king and link pin bushings at the same time as the installation of this, since this item arrives with NO BUSHINGS installed.
 more info
Tie Rod End Puller Tool
Tie Rod End Puller Tool
Price: $79.95

Tie Rod End Puller Tool for removal of 18 to 25mm Tie Rod Ends. more info
HD (High Tensile) Link Pin, 5/8" Diameter to fit Stock Trailing Arms, Set of 4
HD (High Tensile) Link Pin, 5/8" Diameter to fit Stock Trailing Arms, Set of 4
Price: $79.95

HD (High Tensile) Link Pin, 5/8" Diameter to fit Stock Trailing Arms, Set of 4 will take a LOT more abuse than link pins will! This means less down time (and less walking!) due to broken parts! This kit includes the 4 pins you need to do one car.

These fit stock trailing arms, with a 5/8" diameter, 109.8mm long smooth area, and 116.7mm overall length. more info
2" Narrowed Tie Rods, Left and Right SET, 1968 and Older Std Beetle and Ghia, Adjustable, 4048
2" Narrowed Tie Rods, Left and Right SET, 1968 and Older Std Beetle and Ghia, Adjustable, 4048
Price: $79.95

2" Narrowed Tie Rods, Left and Right SET, 1968 and Older Std Beetle and Ghia, Adjustable, 4048 includes 2 tie rod ends and the tie rod. This is the adjustable version narrowed 2" for that 2" narrowed axle beam, so you can properly align the car. Tie rod ends are often seized in the tie rod, it's not worth the bother to try to cut and tap (find a Metric left hand tap, let alone use it!), just get these! more info
Coil Over Shocks, Eye/Eye, Pair, 6505
Coil Over Shocks, Eye/Eye, PAIR, 6505
Price: $74.95

Coil Over Shocks give additional "Spring" to the axle you are installing them on. Fully adjustable design allows you to set your suspension to suit your needs. Helps overcome "Sag" from old torsion bars, without full suspension disassembly. This is for a pair of shocks to do the rear axle. The eye to eye length is 17" extended. I have no way to compress it to measure the compressed length. more info
Wheel Bearing, Front Outer, Ball Bearing, 1949-65 Type 1, 111-405-645A
Wheel Bearing, Front Outer, Ball Bearing, 1949-65 Type 1, 111-405-645A
Price: $74.95

Wheel Bearing, Front Outer, Ball Bearing, 1949-65 Type 1, 111-405-645A is an original style wheel bearing. Not many know that Ball Bearings have a lower rolling resistance than roller bearings, they are better for guys chasing top MPG! more info
KYB Gas-A-Just Shock Absorber, 1952-65 LP T1 Front, 1955-79 Type 2 Front, Type 3 Front
KYB Gas-A-Just Shock Absorber, 1952-65 LP T1 Front, 1955-79 Type 2 Front, Type 3 Front
Price: $74.95

KYB Gas-Charged shock absorbers feature their patented Floating Dividing Piston that separates gas & fluid. The pressure of the gas in the shock prevents oil foaming, but it also acts as a "spring" and will raise the front of your car and make it stiffer. Because they raise the front up, these are great for vehicles with worn springs!

KYB Shocks are sold per EACH, you need 2 to do one axle.

Fits: 1952-65 LP T1 Front, 1955-79 Type 2 Front, Type 3 (ALL) Front

 more info
HD (High Tensile) Link Pin, 7/8" Diameter to fit Aftermarket Trailing Arms, Set of 4
HD (High Tensile) Link Pin, 7/8" Diameter to fit Aftermarket Trailing Arms, Set of 4
Price: $69.95

HD (High Tensile) Link Pin, 7/8" Diameter to fit Aftermarket Trailing Arms, Set of 4 will take a LOT more abuse than stock ones will! This means less down time (and less walking!) due to broken parts! This kit includes the 4 pins you need to do one car.

These fit aftermarket trailing arms, with a 7/8" diameter, 117.8mm long smooth area, and 125mm overall length. more info
Link Pin Set, Brazilian, 1949-65 Type 1, 111-498-051ABR
Link Pin Set, BRAZILIAN, 1949-65 Type 1, 111-498-051ABR
Price: $69.95

Link Pin Set, Brazilian, 1949-65 Type 1, 111-498-051ABR is needed on most old VW Beetles and Ghias, since nobody bothers changing these, they just drive the car until it falls apart! This kit will do both sides of the front axle assembly. more info
KYB Gas-A-Just Shock Absorber, 1968-79 Type 2 Rear, and 8" Extended Tower LP T1 Front
KYB Gas-A-Just Shock Absorber, 1968-79 Type 2 Rear, and 8" Extended Tower LP T1 Front
Price: $69.95

KYB Gas-Charged shock absorbers feature their patented Floating Dividing Piston that separates gas & fluid. The pressure of the gas in the shock prevents oil foaming, but it also acts as a "spring" and will raise the front of your car and make it stiffer.

Fits: 1968-79 Type 2 Rear, and 8" Extended Shock Tower Link Pin 1952-65 Type 1 Front

 more info
Link Pin Chassis Cradle (Axle Beam Dolly, Frame Head Dolly), Type 1 to 1965, LP-15
Link Pin Chassis Cradle (Axle Beam Dolly, Frame Head Dolly), Type 1 to 1965, LP-15
Price: $59.95

Link Pin Chassis Cradle (Axle Beam Dolly, Frame Head Dolly), Type 1 to 1965, LP-15 is a fantastic product if you are rebuilding your chassis. Take the axle beam off, bolt this on, and hyou can still roll it around! HD Caster swivels for full maneuverability in the garage. more info
Stainless Steel Swaybar Clamp Kit, Link Pin Type 1
Stainless Steel Swaybar Clamp Kit, Link Pin Type 1
Price: $57.95

The finest swaybar clamps available for your VW Beetle or Ghia. This is a set of 4 clamps to secure your swaybar to your front trailing arms TIGHTLY, no wiggle or play, just 100% performance! more info
King Pin Set, German, 1949-65 Type 1, 111-498-021
King Pin Set, GERMAN, 1949-65 Type 1, 111-498-021
Price: $54.95

King Pin Set, German, 1949-65 Type 1, 111-498-021 are almost always worn out if you just got your King and Link Pin VW Beetle or Ghia, because most people are lazy and dont' do any work, they just drive the car into the ground! more info
Tie Rod Assembly, Right, 1949-65 Type 1, Adjustable, 113-415-802B
Tie Rod Assembly, Right, 1960-65 Type 1, Adjustable, 113-415-802B
Price: $54.95

Tie Rod Assembly, Right, 1949-65 Type 1, Adjustable, 113-415-802B includes 2 tie rod ends and the tie rod. This is the adjustable version so you can properly align the car. Tie rod ends are often siezed in the tie rod, this prevents that problem!

You must make sure the tie rod ends do not have any play in them they should merely allow a pivot. Play can wear out tires and cause a front end shake.

This assembly also has one tie rod end with the eyelet for the Steering Damper.

Some people have asked, this tie rod assembly measures ~25" from adjusting nut to adjusting nut, the tie rod itself (NOT the ends).

 more info
SINGLE HD (High Tensile) Link Pin, to fit Aftermarket Trailing Arms, per EACH
HD (High Tensile) Link Pin, to fit Aftermarket Trailing Arms, SINGLE
Price: $49.95

HD (High Tensile) Link Pin, to fit Aftermarket Trailing Arms, SINGLE will take a LOT more abuse than stock ones will! This means less down time (and less walking!) due to broken parts!

These fit aftermarket trailing arms, with a 7/8" diameter, 117.8mm long smooth area, and 125mm overall length. more info
Steering Damper, 1960 and Newer Standard Beetle and Ghia, SACHS/BOGE brand 113-425-021
Steering Damper, 1960 and Newer Standard Beetle and Ghia, SACHS/BOGE brand 113-425-021
Price: $49.95

Steering Damper, 1960 and Newer Standard Beetle and Ghia, SACHS/BOGE brand 113-425-021 is the shock absorber for your steering system. The prevents the steering from moving "too fast", and a worn damper can cause the front end to shake as the wheels over-correct. more info
How to Modify Volkswagen Beetle Chassis, Suspension, & Brakes for High Performance, by James Hale, 1-903706-99-8
How to Modify Volkswagen Beetle Chassis, Suspension, & Brakes for High Performance, by James Hale, 1-903706-99-8
Price: $49.95

How to Modify Volkswagen Beetle Chassis, Suspension, & Brakes for High Performance, by James Hale, 1-903706-99-8 is a GREAT BOOK! Doesn't cover any engine stuff, but is fantastic for brakes and suspension work, even though all the pics are in B & W. more info
Super Duty Chrome Tie Rods, With Dampner, 24 1/2" Long, 5577
Super Duty Chrome Tie Rods, With Dampner, 24 1/2" Long, 5577
Price: $49.95

These Super-Strength tie rods accept stock VW Tie Rod Ends. You REALLY have to do something stupid or crazy to bend one of these! Tubing is 3x heavier than stock, and chromed so they look as good as they work! Kit includes both tie rods! These have the longer tie rod that is used WITH the Damper Tie Rod End. more info
Super Duty Chrome Tie Rods, W/O Dampner, 26 1/2" Long
Super Duty Chrome Tie Rods, W/O Dampner, 26 1/2" Long
Price: $49.95

These Super-Strength tie rods accept stock VW Tie Rod Ends. You REALLY have to do something stupid or crazy to bend one of these! Tubing is 3x heavier than stock, and chromed so they look as good as they work! Kit includes both tie rods! These have the longer tie rod that is used WITHOUT the Damper Tie Rod End. more info
Urethane Bushing Kit, Inner/Outer, Micarta Bushing/Linkpin Beam
Urethane Bushing Kit, Inner/Outer, Micarta Bushing/Linkpin Beam
Price: $47.95

The use of Urethane Beam bushings takes the movement out of trailing arms, while also providing phenomenal wear characteristics, AND a little "give" in case of hard impacts. These are outstanding for off road use, and work very well for street use too! more info
Extra Adjustment Camber Adjusters (Camber Eccentrics), 1966 and Later Ball Joint Type 1s, Pair
Extra Adjustment Camber Adjusters (Camber Eccentrics), 1966 and Later Ball Joint Type 1s, PAIR
Price: $44.95

Extra Adjustment Camber Adjusters (Camber Eccentrics), 1966 and Later Ball Joint Type 1s, Pair are used to double the normal range of camber adjustment compared to stock units. This is great for Auto-X or situations where you simply need more camber adjustment! Price is for a pair of adjusters, one for each side. more info
   
 
1 2 3
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.