|
|
|
|
|
Rubber Boot for Sealed Switch
|
|
Rubber Boot for Sealed Switch fits 3570, 3571, 3572, and 3573.
|
|
|
|
|
|
|
|
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads)
|
|
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to plug the threaded bung up when you don't have the O2 sensor installed for whatever reason (IE: You are finished tuning). You can save wear/tear on the O2 sensor by saving it!
|
|
|
|
|
|
|
|
VDO 3-Prong Push On Connector
|
|
This is the connector that makes connecting your VDO Oil Pressure or Oil Temperature gauges up easier. You do not "need" this, but if you ever removed the wires, it can be confusing when putting them back on. This makes it so they only go on one way!
|
|
|
|
|
|
|
|
RED Indicator Light, 1/2" Hole
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
AMBER Indicator Light, 1/2" Hole
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
BLUE Indicator Light, 1/2" Hole
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
GREEN Indicator Light, 1/2" Hole
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
Stainless Steel O2 BUNG (only)
|
|
|
|
|
|
|
|
|
|
3 hole Panel - (2) 2 1/16" and (1) 3 1/8" - for VDO Gauges, 14-1003-0
|
|
VDO Gauge Panel, for (2) 2 1/16" Gauge and (1) 3 1/8" Gauge, 14-1003-0 is perfect for when you are using a 3 1/8" tachometer, and want to compliment it with a couple 2 1/16" VDO Gauges too! Compactly fits next to the left of your speedometer.
|
|
|
|
|
|
|
|
3 hole Panel (2 1/16" size) for VDO Gauges, 14-1001-0
|
|
VDO Gauge Panel, Left Side, (3) 2 1/16" Gauges, 14-1001-0 is a steel bracket which replaces the panel to the left of the speedometer. It's ideal for adding gauges to your car. It's inserted into the stock location, then bend the tabs on the other side.
|
|
|
|
|
|
|
|
1 hole Panel (2 1/16" size) for VDO Gauge, 14-1005-0
|
|
VDO Gauge Panel, for 2 1/16" Gauge, 1 Hole, 14-1005-0 is a steel bracket which replaces the panel to the right of the speedometer. It's ideal for adding gauges to your car. It's inserted into the stock location, then bend the tabs on the other side.
|
|
|
|
|
|
|
|
2 hole Panel (2 1/16" size) for VDO Gauges, 14-1007-0
|
|
VDO Gauge Panel, for 2 1/16" Gauge, 2 Hole, 14-1007-0 is a steel bracket which replaces the panel to the right of the speedometer. It's ideal for adding gauges to your car. It's inserted into the stock location, then bend the tabs on the other side.
|
|
|
|
|
|
|
|
Push Button Switch, Momentary ON
|
|
Push Button Momentary ON Switch. Spring loaded button is great for starter or even your horn! Comes complete with dust boot to ensure proper operation in off-road environments.
|
|
|
|
|
|
|
|
RED SUPER Indicator Light, 3/4" Hole
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
GREEN SUPER Indicator Light, 3/4" Hole
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
AMBER SUPER Indicator Light, 3/4" Hole
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
BLUE SUPER Indicator Light, 3/4" Hole
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
HD Sealed Switch, On-Off, 20 Amp
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
Switch Guard for Sealed Switch
|
|
Switch Guard for Sealed Switch fits 3570, 3571, 3572, and 3573.
|
|
|
|
|
|
|
|
HD Sealed Switch, On-Off-On, 20 Amp
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
Gauge Mounting Bracket for 2 1/16" Gauge, 1 Hole
|
|
This is a Gauge Mounting Bracket/Panel for a 2 1/16" VDO Gauge. It's a steel bracket that can be gently bent to provide the best angle for gauge visibility and appearance. This mounts 1 Gauge.
|
|
|
|
|
|
|
|
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads)
|
|
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning.
|
|
|
|
|
|
|
|
HD Sealed Switch, Off-On-Momentary On, 20 Amp
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads)
|
|
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning. Stainless Steel for SS exhausts!
|
|
|
|
|
|
|
|
VDO Blind Cover (Blank Hole Cover), 2 1/16" Gauges, EACH, V240864
|
|
VDO Blind Cover (Blank Hole Cover), 2 1/16" Gauges, Each, V240864 is a snap-in ABS covers for gauge panels that do not have a gauge in them. They are matte black with a raised bezel profile, just like a gauge face.
|
|
|
|
|
|
|
|
HD Sealed Switch, Off-On-On, 20 Amp
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
Molding for Dehne Fuel Gauge, 2 Pieces, 155-721-30688
|
|
Molding for Dehne Fuel Gauge, 2 Pieces, 155-721-30688 is the finishing touch for the installation of your Dehne Fuel Gauge into your Oval VW Beetle!
|
|
|
|
|
|
|
|
Gauge Mounting Bracket for 2 1/16" Gauge, 2 Hole
|
|
This is a 2-hole Gauge Mounting Bracket/Panel for 2 1/16" size gauges. It's a steel bracket that can be gently bent to provide the best angle for gauge visibility and appearance.
|
|
|
|
|
|
|
|
Gauge Mounting Bracket for 2 1/16" VDO Gauges, 3 Hole
|
|
This is a 3 Hole Gauge Mounting Bracket/Panel for 2 1/16" VDO Gauges. It's a steel bracket that can be gently bent to provide the best angle for gauge visibility and appearance. This mounts 3 Gauges.
|
|
|
|
|
|
|
|
Under Dash Stereo and Gauge Panel, ABS Plastic, EACH, 00-0034-0
|
|
Under Dash Stereo and Gauge Panel, ABS Plastic, EACH, 00-0034-0 is molded to fit the hump beneath your dashboard (above your shifter). You can open this for aftermarket gauges, or a stereo, so you don't cut up your stock dashboard!
|
|
|
|
|
|
|
|
VDO Dimmer Ring, 2 1/16" Gauge, PAIR
|
|
This is a matte black "Hood" that fits over the gauge face, to shield the gauge from sunlight, so it's easier to see the gauge face in bright sunlight.
|
|
|
|
|
|
|
|
VDO Cylinder Head Temperature Wiring Kit, 15' Long, V240701
|
|
VDO Cylinder Head Temperature Wiring Kit, 15' Long, V240701 is a 15' long harness and ends to connect your VDO CHT (Cylinder Head Temperature) gauge to your thermocouple on the engine. You cannot just use regular automotive wiring for this job, due to the characteristics of the CHT Thermocouple.***THIS ITEM IS NO LONGER AVAILABLE FROM VDO!!! They now INCLUDE the harness with the CHT Senders (Thermocouples) as a package, instead of selling them separately. So if you want a harness, order the sender!
|
|
|
|
|
|
|
|
Gaugebox/Switchbox, 4.50 X 6.50 X 4", Brushed Aluminum
|
|
These Aluminum Switchboxes provide a custom way to install gauges and/or switches into your car or buggy. Brushed aluminum finish LOOKS GREAT. This has (2) 3/4" Holes, and (4) 1/2" Holes for switches and warnign lights (No Gauges).
|
|
|
|
|
|
|
|
Dehne Fuel Gauge Bezel for 1958-67 LHD Type 1, 155-291-30100
|
|
Dehne Fuel Gauge Bezel for 1958-67 LHD Type 1, 155-291-30100 is the easy way to complete the installation of your Dehne Fuel Gauge into your 1958-67 LHD VW Beetle. This mounts the Dehne Fuel Gauge to immediately to the right of your Speedometer.
|
|
|
|
|
|
|
|
Dehne Fuel Gauge Bezel for 1958-67 RHD Type 1, 155-291-30300
|
|
Dehne Fuel Gauge Bezel for 1958-67 RHD Type 1, 155-291-30300 is the easy way to complete the installation of your Dehne Fuel Gauge into your 1958-67 LHD VW Beetle. This mounts the Dehne Fuel Gauge to immediately to the left of your Speedometer.
|
|
|
|
|
|
|
|
Dehne Fuel Gauge Ashtray Panel for RHD Oval Window VW Beetle, 155-291-30700
|
|
Dehne Fuel Gauge Ashtray Panel for RHD Oval Window VW Beetle, 155-291-30700 is the easy way to complete the installation of your Dehne Fuel Gauge into your RHD Oval VW Beetle.
|
|
|
|
|
|
|
|
Dehne Fuel Gauge Ashtray Panel for LHD Oval Window VW Beetle, 155-291-30400
|
|
Dehne Fuel Gauge Ashtray Panel for LHD Oval Window VW Beetle, 155-291-30400 is the easy way to complete the installation of your Dehne Fuel Gauge into your LHD Oval VW Beetle.
|
|
|
|
|
|
|
|
Gaugebox/Switchbox, 9.75 X 6.5 X 4", Brushed Aluminum, Undrilled
|
|
These Aluminum Switchboxes provide a custom way to install gauges and/or switches into your car or buggy. Brushed aluminum finish LOOKS GREAT. This one has a face that is undrilled for a custom setup the way YOU want it!
|
|
|
|
|
|
|
|
Mega Mount Billet Aluminum 1 1/2" Tubing Adapter Clamp
|
|
This adapter allows you to bolt up our Mega Mount Tachometer bracket to a 1 1/2" diameter chassis or frame tubing.
|
|
|
|
|
|
|
|
Mega Mount Billet Aluminum Tach Bracket
|
|
This billet clamp tachometer bracket provide the equipment for an easy installation, and one that looks great too! It also has a machined hole to run the wires in so they are virtually invisible!
|
|
|
|
|
|
|
|
VDO 2 1/16" Gauge Mounting Cup, Long Length
|
|
This 2 1/16" Gauge Mounting Cup provide a method of mounting y our VDO Gauges. They are ABS, finished in Matte Black, with a steel black mounting ring. These allow you to mount your gauges, while also protecting and beautifying your gnarly wiring!
|
|
|
|
|
|
|
|
Fast Fab Gauge Mounting Plate (Gauge Panel), 1958-1967 Beetle, Accepts (3) 2 1/16" Gauges, 1158-67143
|
|
Fast Fab Gauge Mounting Plate (Gauge Panel), 1958-1967 Beetle, Accepts (3) 2 1/16" Gauges, 1158-67143 is designed to mount in your 1958-1967 VW Beetle radio hole without any modifications to your dash! All gauges mount behind the panel and are held in place with a metal back plate. The steel insert is paintable (so you can color match to your dash) or you can use the panel with the matte black powder-coated panel provided.
Also included are the trim parts that match your factory trim on the glove box and fuel gauge surround, which gives your car a look that could have come from the factory. This product includes all parts needed to install in your car. Gauges are not included!
|
|
|
|
|
|
|
|
Vintage Speed Dehne Digital Fuel Gauge (Reproduction), 155-721-30500
|
|
Vintage Speed Dehne Digital Fuel Gauge (Reproduction), 155-721-30500 is machined from 6061 aluminum, and designed to give your classic VWa modern look and feel while still retaining its Vintage "Bug" Style. This Dehne Fuel Gauge is 6 and 12 Volt compatible, and works Type 1 Electric Fuel Tank Sending Units, as well as with Karmann Ghia and Pre '73 Type 2 tubed tank sending units.
|
|
|
|
|
|
|
|
Fast Fab Gauge Mounting Plate (2 Hole Gauge Panel), 1950-1977 Beetle and 56-65 Ghia, 5150-65187
|
|
This fantastic custom gauge panel makes mounting (2) 2 1/16" VDO gauges into your 1950-77 VW Beetle or 56-65 Ghia radio hole, without any modifications to your dash! All gauges mount behind the panel and are held in place with a metal backing plate. The steel insert is paintable (so you can color match to your dash) or you can use the panel with the matt black powder-coated panel provided.
Also included are the trim parts that match your factory trim on the glove box and fuel gauge surround, which gives your car a look that could have come from the factory. This product includes all parts needed to install in your car. Gauges not included!
|
|
|