|
|
|
|
|
|
Deck Lid Script Retaining Clip (Rubber), EACH, 113-853-695
|
Price: $1.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Deck Lid Script Retaining Clip, Each, 113-853-695 is called a "Clip" but it's really rubber. It slips onto the post of the badge, squeezing it and holding it in place, firmly but not so tight it will wear your paint! You need one for each post on the badge!
|
|
|
|
|
|
|
|
|
|
Deck Lid Script Retaining Clip (METAL), EACH, 113-853-695
|
Price: $1.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Deck Lid Script Retaining Clip (METAL), Each, 113-853-695 is the metal version of the clip that slips onto the post of the badge, squeezing it and holding it in place firmly. You need one for each post on the badge.
|
|
|
|
|
|
|
|
|
|
Headlight Trim Ring Retaining Screw, Karmann Ghia, EACH, 141-941-195A
|
|
|
Headlight Trim Ring Retaining Screw, Karmann Ghia, EACH, 141-941-195A is the screw at the bottom of the headlight ring, which hold it tight against the body of the car. These are often bad, and the screwdriver tip won't fit, or it looks rusty and horrible!
|
|
|
|
|
|
|
|
|
|
VW Hood Emblem Seals (Clamps), All Models, Set of 3, 113-853-615
|
Price: $1.80
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
VW Hood Emblem Seals (Clamps), All Models, Set of 3, 113-853-615 are seals that holds the emblem onto the front of your VW. These are often cracked or missing completely, if not covered with several layers of paint! A new emblem deserves new seals!
|
|
|
|
|
|
|
|
|
|
Gas Door Sticker “Oktan Min. 91Roz/Ron”, Used on All Models
|
Price: $3.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Gas Door Sticker “Oktan Min. 91Roz/Ron”, Used on All Models is one of those little things that makes your restoration that much more complete compared to the other guys! These are usually missing, and especially needed after a new paint job!
|
|
|
|
|
|
|
|
|
|
|
Front Turn Signal Lens To Bulb Holder Gasket, 1964 1/2-69 Karmann Ghia AND 1962-63 AND 1968-69 Type 3, 311-953-151PR
|
Price: $4.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Front Turn Signal Lens To Bulb Holder Gasket, 1964 1/2-69 Karmann Ghia AND 1962-63 AND 1968-69 Type 3, 311-953-151PR ensures a water tight seal to prevent corrosion of the bulb holder!
|
|
|
|
|
|
|
|
|
|
Window Washer Nozzle (Sprayer, Spritzer) with Seal, 1961-79 Beetle and Super Beetle, 1961-74 Karmann Ghia, 1973-74 THING, and 1968-70 Type 3, 111-955-993A-111-993
|
|
|
Window Washer Nozzle (Sprayer, Spritzer) with Seal 1961-79 Beetle and Super Beetle, 1961-74 Karmann Ghia, 1973-74 THING, and 1968-70 Type 3, 111-955-993A-111-993 is the often cracked, and often painted over, nappy looking piece in front of the windshield! A great paint job will look horrible if this isn't clean and in good shape. Never mind if it's completely clogged!
|
|
|
|
|
|
|
|
|
|
|
Karmann Ghia License Plate, GERMAN Oval w/Ghia Logo, EACH, 141-006-100KG
|
|
|
Karmann Ghia License Plate, German Oval w/Ghia Logo, EACH, 141-006-100KG is a nice item to customize your show car, or to put on the front (if your state allows it) to declare your car! Holes are in the stock license plate location for easy mounting.
|
|
|
|
|
|
|
|
|
|
"1600CC" Emblem, Satin Black with Brushed Silver Numbers, Stick On
|
|
|
"1600CC" Emblem, Satin Black with Brushed Silver Numbers, Stick On Numbers affix with 3M double sided adhesive. Many VW owners use this to show their engine displacement, in a more modern look! Easy to install for a distinctive appearance. The 1600cc Emblem has been discontinued, so when these are gone the are GONE!
|
|
|
|
|
|
|
|
|
|
"2275CC" Emblem, Satin Black with Brushed Silver Numbers, Stick On
|
|
|
"2275CC" Emblem, Satin Black with Brushed Silver Numbers, Stick On Numbers affix with 3M double sided adhesive. Many VW owners use this to show their engine displacement, in a more modern look! Easy to install for a distinctive appearance.
|
|
|
|
|
|
|
|
|
|
Quick Release Deck Lid Hinge Pin Kit, PAIR
|
|
|
Quick Release Deck Lid Hinge Pin Kit, Pair replaces your fixed decklid hinge pins so you can R&R your decklid in SECONDS without fighting alignment issues that seemingly take FOREVER. Some jobs are easier with the deck lid off, so is showing off your engine!
|
|
|
|
|
|
|
|
|
|
|
"1914CC" Emblem, Satin Black with Brushed Silver Numbers, Stick On
|
|
|
"1914CC" Emblem, Satin Black with Brushed Silver Numbers, Stick On Numbers affix with 3M double sided adhesive. Many VW owners use this to show their engine displacement, in a more modern look! Easy to install for a distinctive appearance.
|
|
|
|
|
|
|
|
|
|
Deck Lid Hardware Kit, 1968 and Newer VW Beetle and Karmann Ghia, Stainless Steel
|
|
|
Deck Lid Hardware Kit, 1968 and Newer VW Beetle and Karmann Ghia, Stainless Steel includes the stainless stuff you need to bolt the deck lid to the car, and also includes the latch and light housing hardware too!
|
|
|
|
|
|
|
|
|
|
|
Deck Lid Hardware Kit, 1966 and Older VW Beetle and Karmann Ghia, Stainless Steel
|
|
|
Deck Lid Hardware Kit, 1966 and Older VW Beetle and Karmann Ghia, Stainless Steel includes the stainless stuff you need to bolt the deck lid to the car, and also includes the latch and light housing hardware too!
|
|
|
|
|
|
|
|
|
|
Amsoil Synthetic White Lithium Multi-Purpose Spray Grease, 10oz Aerosol, GSPSC-E
|
|
|
Amsoil Synthetic White Lithium Multi-Purpose Spray Grease, 10oz Aerosol, GSPSC-E is HIGHLY RECOMMENDED for our Vintage VWs for inaccessible lubrication needs. Door Hinges, Pedal Assemblies, e-brake cables, throttle cables, clutch cables, heater cables, etc. This product can ONLY ship via UPS Ground!
|
|
|
|
|
|
|
|
|
|
Decklid Standoff Kit, Type 1s, PAIR
|
|
|
This kit of Cast Aluminum Hinge Extensions brings the top of the decklid out away from the body around 3", for an easier flow of cool air into the cooling system. These are NOT needed on decklids with vents in them, but non-vented decklids will run cooler
|
|
|
|
|
|
|
|
|
|
Chrome Decklid Spring, EACH
|
|
|
Trying to "paint" the stock spring is such a waste of time! Buying a new chrome one makes more $ sense, just keep it waxed!
|
|
|
|
|
|
|
|
|
|
Headlight Eyebrows CHROME, 67 and Later, PAIR, 00-6450-0
|
|
|
Custom Chrome Eyebrows fit firmly into the headlight ring and give your car a "Vintage" or "Sleepy" look. It's an old skool customizing trend that is simple to do in a few minutes, and it never goes out of style. Fit Type 1 and 3 cars.
|
|
|
|
|
|
|
|
|
|
Headlight Eyebrows, STAINLESS STEEL, PAIR, 00-6458-0
|
|
|
Eyebrows, Stainless Steel, Pair, 00-6458-0 give your car or bus the "sleepy" look by installing just between the headlight ring and body. Our eyebrows are stainless steel (NO RUST EVER). Price is for a pair to do one vehicle. You can also use them on early busses if you CAREFULLY flex them into the wider shape (because the headlights are "sideways).
|
|
|
|
|
|
|
|
|
|
Deck Lid Script (Volkswagen Emblem), "Volkswagen", Reproduction, EACH, 113-853-687K
|
|
|
Deck Lid Script (Volkswagen Emblem), "Volkswagen", Reproduction, Each, 113-853-687K is a decent quality deck lid script. It has a more "machined" finish than our OE VW Script, more Industrial Looking so to speak. Good for most restorations. Fit's 1967+ Type 1s and Type 3s.
|
|
|
|
|
|
|
|
|
|
|
Front Turn Signal Lens, Amber, 1964 1/2-69 Karmann Ghia AND 1962-63 AND 1968-69 Type 3, 315-161D-LR
|
|
|
Front Turn Signal Lens, Amber, 1964 1/2-69 Karmann Ghia AND 1962-63 AND 1968-69 Type 3, 315-161D-LR replaces that faded, cracked, or missing lens on the front of your Ghia or Type 3! You need a water tight seal to prevent corrosion of the bulb holder!
|
|
|
|
|
|
|
|
|
|
Door Handle with Keys, 1968+ Beetle and Karmann Ghia, EACH, 113-837-205M
|
|
|
Door Handle with Keys, 1968+ Beetle and Karmann Ghia, 113-837-205M (sold per EACH) is a high quality reproduction door handle and a pair of keys. To remove, peel back the door rubber near the handle and remove the screw. "Pop" the handle forward and it comes out.
If you order 2 of these handles at the same time we will supply you with a PAIR OF HANDLES WITH MATCHING KEYS!
|
|
|
|
|
|
|
|
|
|
VW Hood Emblem (REPRODUCTION, Plastic), fits 1955-63 VW Beetle and Ghia, 113-853-601A
|
|
|
VW Hood Emblem, 1955-63 VW Beetle and Ghia, 113-853-601A is pressed into 3 holes in the top of the hood. HS Kids steal these off of cars, so yours might be missing! This emblem does not come with the necessary rubber sleeves to press into on the hood.
|
|
|
|
|
|
|
|
|
|
VW Hood Emblem, 1964-79 VW Beetle, Ghia, and Thing, and 1962-69 Type 3, 113-853-601B
|
|
|
VW Hood Emblem, 1964-79 VW Beetle, Ghia, and Thing, and 1962-69 Type 3, 113-853-601B is pressed into 3 holes in the top of the hood. HS Kids steal these off of cars, so yours might be missing! This is an OEM VW Emblem, super high quality!
|
|
|
|
|
|
|
|
|
|
Deck Lid Script, "Volkswagen", OE GERMAN, EACH, 113-853-687KOE
|
|
|
Deck Lid Script, "Volkswagen", OE German, Each, 113-853-687KOE is the nicest quality decklid script you will find for your VW. SMOOTH Finish, and holds up very well to weather. Fit's 1966+ Type 1s and 1967+ Type 3s.
|
|
|
|
|
|
|
|
|
|
Headlight Bucket Assembly (NO BULB), 1967+ Type 1, 1968-79 Type 2, and 1961-74 Type 3, 141-941-041EC
|
|
|
Headlight Bucket Assembly (NO BULB), 1967+ Type 1, 1968-79 Type 2, and 1961-74 Type 3, 141-941-041EC is the assembly that bolts the headlight to the car's fender. It allows headlight aim adjustments. These get bent and mangled in accidents.
|
|
|
|
|
|
|
|
|
|
HELLA (Mex) Headlamp with H4 Bulb, 1967+ Type 1, 1968-79 Type 2, and 1961-74 Type 3, BAA941751A
|
|
|
HELLA (Mex) Headlamp with H4 Bulb, 1967+ Type 1, 1968-79 Type 2, and 1961-74 Type 3, BAA941751A is Genuine Hella of Mexico AND COMES WITH A HELLA H4 HALOGEN SEALED BEAM! This is the headlamp and bulb. Housing is sold separately.
|
|
|
|
|
|
|
|
|
|
|
Car Cover, Deluxe (3 LAYER), Custom Fit for VW Karmann Ghia Sedan and Convertibles, 141-007-200
|
|
|
Car Cover, Deluxe, Custom Fit for VW Karmann Ghia Sedan and Convertibles, 141-007-200 is a custom fit design for VW Ghia. It has mirror pockets sewn in!
The Deluxe Custom Fit covers last approx 1 year out in the elements, and 2-3 years if used indoors. There is no warranty on the lifespan of this cover.
|
|
|
|
|
|
|
|
|
|
|
Car Cover, Ultimate (4 LAYER), Custom Fit for VW Karmann Ghia Sedan and Convertibles, 141-007-150
|
|
|
Car Cover, Ultimate (4 LAYER), Custom Fit for VW Karmann Ghia Sedan and Convertibles, 141-007-150 is the best fitting car cover available! Custom sewing pattern, not a "one size fits none" design! This even has mirror pockets sewn in! We promise you this is the best fitting car cover you can get!
This car cover will typically last 1-2 years outdoors, and a year or two longer if used exclusively indoors. There is no warranty on the lifespan of this cover.
|
|
|
|
|
|
|
|
|
|
|
Rear Hood Louver Trim Kit, 1956-74 Karmann Ghia, 34pc Set, 141-008-100
|
|
|
Rear Hood Louver Trim Kit, 1956-74 Karmann Ghia, 34pc Set, 141-008-100 is a set (not 1 piece!), used to dress up the normally plain (and often poorly painted) louvers on the deck lid of your Karmann Ghia. These are very easy to install in minutes!
|
|
|
|
|
|
|
|
|
|
Stainless Steel Barbeque, Great For Tailgating!
|
|
|
Stainless Steel Barbeque, Great For Tailgating! We have 2 of these custom made BBQs left, which customers use for tailgating and car show presentation. They are NEW and unused. BBW is 15"w X 10"d X 12"h
|
|
|
|
|
|
|
|
|
|
|
Side Body Molding Set for ALL Ghias 1956-74 (Clips sold separately) 141-600M
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless Steel Body Hardware Kit, Ghia with IRS Rear Suspension, Hex, Cheese, and Phillips Head with Hex Nuts
|
|
|
Stainless Steel Body Hardware Kit, Ghia with IRS Rear Suspension, Hex, Cheese, and Phillips Head with Hex Nuts is a fantastic kit with "sub kits" bagged INDIVIDUALLY so you can tackle one section of your car at a time! Engine, Bumper Brackets, Door Hinges, etc. This full hardware set contains the over 400 nuts and bolts needed to completely assemble your car. And since it's all stainless, you'll also be able to take it back apart again with ease! The "sub kits" that make up the complete hardware set are also sold separately.
|
|
|
|
|
|
|
|
|
|
|
Stainless Steel Body Hardware Kit, Ghia with Swing Axle Rear Suspension, Hex, Cheese, and Phillips Head with Hex Nuts
|
|
|
Stainless Steel Body Hardware Kit, Ghia with Swing Axle Rear Suspension, Hex, Cheese, and Phillips Head with Hex Nuts is a fantastic kit with "sub kits" bagged INDIVIDUALLY so you can tackle one section of your car at a time! Engine, Bumper Brackets, Door Hinges, etc. This full hardware set contains the over 400 nuts and bolts needed to completely assemble your car. And since it's all stainless, you'll also be able to take it back apart again with ease! The "sub kits" that make up the complete hardware set are also sold separately.
|
|
|
|
|
|
|
|
|
|
Stainless Steel Body Hardware Kit, Ghia with IRS Rear Suspension, Button and Socket Head with Hex Nuts
|
|
|
Stainless Steel Body Hardware Kit, Ghia with IRS Rear Suspension, Button and Socket Head with Hex Nuts is a fantastic kit with "sub kits" bagged INDIVIDUALLY so you can tackle one section of your car at a time! Engine, Bumper Brackets, Door Hinges, etc. This full hardware set contains the over 400 nuts and bolts needed to completely assemble your car. And since it's all stainless, you'll also be able to take it back apart again with ease! The "sub kits" that make up the complete hardware set are also sold separately.
|
|
|
|
|
|
|
|
|
|
Stainless Steel Body Hardware Kit, Ghia with IRS Rear Suspension, Socket Head with Hex Nuts
|
|
|
Stainless Steel Body Hardware Kit, Ghia with IRS Rear Suspension, Socket Head with Hex Nuts is a fantastic kit with "sub kits" bagged INDIVIDUALLY so you can tackle one section of your car at a time! Engine, Bumper Brackets, Door Hinges, etc. This full hardware set contains the over 400 nuts and bolts needed to completely assemble your car. And since it's all stainless, you'll also be able to take it back apart again with ease! The "sub kits" that make up the complete hardware set are also sold separately.
|
|
|
|
|
|
|
|
|
|
|
Stainless Steel Body Hardware Kit, Ghia with Swing Axle Rear Suspension, Button and Socket Head with Hex Nuts
|
|
|
Stainless Steel Body Hardware Kit, Ghia with Swing Axle Rear Suspension, Button and Socket Head with Hex Nuts is a fantastic kit with "sub kits" bagged INDIVIDUALLY so you can tackle one section of your car at a time! Engine, Bumper Brackets, Door Hinges, etc. This full hardware set contains the over 400 nuts and bolts needed to completely assemble your car. And since it's all stainless, you'll also be able to take it back apart again with ease! The "sub kits" that make up the complete hardware set are also sold separately.
|
|
|
|
|
|
|
|
|
|
|
Stainless Steel Body Hardware Kit, Ghia with Swing Axle Rear Suspension, Socket Head with Hex Nuts
|
|
|
Stainless Steel Body Hardware Kit, Ghia with Swing Axle Rear Suspension, Socket Head with Hex Nuts is a fantastic kit with "sub kits" bagged INDIVIDUALLY so you can tackle one section of your car at a time! Engine, Bumper Brackets, Door Hinges, etc. This full hardware set contains the over 400 nuts and bolts needed to completely assemble your car. And since it's all stainless, you'll also be able to take it back apart again with ease! The "sub kits" that make up the complete hardware set are also sold separately.
|
|
|
|
|
|
|
|
|
|
Vintage Speed Roof Rack For Karmann Ghia, 155-393-01588
|
|
|
Vintage Speed Roof Rack For Karmann Ghia, 155-393-01588 comes complete with stainless steel nuts and bolts, and protective pads for the rack base and roof eave hooks. One of the finest roof racks available, and provides a retro look and feel!
|
|
|
|
