|
|
|
|
|
|
Big-Sert (Time-Sert) Tool USED, 14 x 1.25mm (14mm Spark Plugs), Super-Duty Repair, 5141S PURCHASE
|
|
|
Big-Sert (Time-Sert) Tool Rental, 14 x 1.25mm (14mm Spark Plugs), Super-Duty Repair, 5141S is the best thread repair kit available. This size is typically used to repair damaged spark plug threads that have already been "fixed" (Heli-coil!) but blew out again! If you have a super loose or super tight spark plug, you will probably need this tool soon! This tool cuts to a 18mm ID, which will repair MOST previously repaired inserts. If you are not sure you should measure yours! Time-Sert inserts are superior in every way to typical "Heli Coil" thread repair kit. This size is typically used to repair damaged spark plug threads in cylinder heads For this item we recommend Copper Repair Inserts, it is more consistent size-wise, and has better heat transfer, than the steel inserts.The rental period for this kit is: ONE MONTH.
|
|
|
|
|
|
|
|
|
|
USED Time-Sert Tool Kit PN 0127, 1/8-27 (for fixing Oil Pressure Sending Unit Threads), - FINAL SALE/No Return - INSERTS NOT INCLUDED
|
|
|
USED Time-Sert Tool Kit PN 0127, 1/8-27 (for fixing Oil Pressure Sending Unit Threads), - FINAL SALE/No Return
*This USED tool sale does NOT include any inserts.*
This size is typically used to repair damaged threads in the case at the oil pressure sending unit.
|
|
|
|
|
|
|
|
|
|
Coil Spring Compressor Tool Rental Fee, KTC-A1047
|
Rental Fee $65.00
$500 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
|
|
Coil Spring Compressor Tool Rental, KTC-A1047 is THE easiest and safest way to remove and install coil springs on your VW Super Beetle, Vanagon, or even other makes! Includes 110, 120, and 130mm Jaws to do most models of car, including Macpherson struts! The rental period for this kit is: ONE MONTH. Please note that the core charge/replacement cost for this kit is $500.00, so be sure to return it on time!
|
|
|
|
|
|
|
|
|
|
Time-Sert Tool Rental Fee, 10 x 1.5mm (Engine Case Mounting Stud), 1015
|
Rental Fee $30.00
$100 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
|
|
Time-Sert Tool Rental, 10 x 1.5mm (Engine Case Mounting Stud), 1015 is the best thread repair kit available. This size is typically used to repair damaged engine mounting studs that have stripped the engine case. Inserts purchased separately. Inserts NOT INCLUDED! The rental period for this kit is: ONE MONTH.
|
|
|
|
|
|
|
|
|
|
Time-Sert Tool Rental Fee, 10 x 1.5mm (10mm Head Stud), Big-Sert Repair, 5015
|
Rental Fee $30.00
$100 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
|
|
Time-Sert Tool Rental, 10 x 1.5mm (10mm Head Stud), Big-Sert Repair, 5015 is the best thread repair kit available. This is typically used to repair cylinder head stud threads in engine cases, that have previously pulled a case-saver, the drilled hole is .484" (31/64"). The rental period for this kit is: ONE MONTH.
|
|
|
|
|
|
|
|
|
|
Time-Sert Tool Rental Fee, 14 x 1.25mm (14mm Spark Plugs), Standard Repair, 4412
|
Rental Fee $30.00
$100 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
|
|
Time-Sert Tool Rental, 14 x 1.25mm (14mm Spark Plugs), Standard Repair, 4412 is the best thread repair kit available. If you have a super loose or super tight spark plug, you will probably need this tool soon! Time-Sert inserts are superior in every way to typical "Heli Coil" thread repair kit. This size is typically used to repair damaged spark plug threads in cylinder heads For this item we recommend Copper Repair Inserts, it is more consistent size-wise, and has better heat transfer, than the steel inserts.The rental period for this kit is: ONE MONTH.
|
|
|
|
|
|
|
|
|
|
Time-Sert Tool Rental Fee, 6 x 1mm (Oil Drain Plate Studs), 1610
|
Rental Fee $30.00
$100 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
|
|
Time-Sert Tool Rental, 6 x 1mm (Oil Drain Plate Studs), 1610 is the best thread repair kit available. This size is typically used to repair damaged intake and exhaust studs, as well as the small studs in the engine case. Inserts NOT INCLUDED! The rental period for this kit is: ONE MONTH.
|
|
|
|
|
|
|
|
|
|
Time-Sert Tool Rental Fee, 5/16-24 (Aftermarket Rocker Arm Valve Adjusting Screw), 0562
|
Rental Fee $30.00
$100 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
|
|
Time-Sert Tool Rental, 5/16-24 (Aftermarket Rocker Arm Valve Adjusting Screw), 0562 is the best thread repair kit available. This size is typically used to repair damaged adjusting screws in aftermarket rocker arms. Time-Sert tool rental period is one month.
|
|
|
|
|
|
|
|
|
|
Wheel Bearing Race Driver Tool, Rental Fee
|
Rental Fee $20.00
$100 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
|
|
Wheel Bearing Race Driver Tool, Rental is a really nice thing to have when you have to install some wheel bearing races into the brake drum or brake rotors. Using a drift can damage the race, then the wheel bearing goes bad quickly! This is easy! Simply find the driver that fits the bearing race, and then you can hit it pretty hard with a hammer to drive it in straight, true, and all the way seated! Kit comes with 10 different sizes of Drivers to fit most any bearing size.Then you can grease and install the bearing, and finish the job knowing it's done right!
|
|
|
|
|
|
|
|
|
|
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads)
|
|
|
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning. Stainless Steel for SS exhausts!
|
|
|
|
|
|
|
|
|
|
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads)
|
|
|
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning.
|
|
|
|
|
|
|
|
|
|
Big-Sert (Time-Sert) Thread Repair Insert, 10 x 1.5 x 20mm Long, 50153
|
Price: $9.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Big-Sert (Time-Sert) Thread Repair Insert, 10 x 1.5 x 20mm Long, 50153 is the best thread repair kit available. This is typically used to repair cylinder head stud threads in engine cases, that have previously pulled a case-saver, the drilled hole is .484" (31/64"). Inserts are sold per EACH. Big-Sert is the over sized Time-Sert for repairs of repairs!
|
|
|
|
|
|
|
|
|
|
|
Stainless Steel O2 BUNG (only)
|
|
|
|
|
|
|
|
|
|
|
|
|
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads)
|
|
|
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to plug the threaded bung up when you don't have the O2 sensor installed for whatever reason (IE: You are finished tuning). You can save wear/tear on the O2 sensor by saving it!
|
|
|
|
|
|
|
|
|
|
Time-Sert Thread Repair Insert, 10 x 1.5 x 24.5mm Long, EACH, 10155
|
Price: $4.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Time-Sert Thread Repair Insert, 10 x 1.5 x 24.5mm Long, EACH, 10155 is the insert for the 10 x 1.5mm Time-Sert when repairing damaged engine mounting studs that have stripped the engine case, to a better than new condition. Inserts are sold per EACH.Time-Sert inserts are superior in every way to typical "Heli Coil" thread repair kits (which are usually wrapped wire, very weak and troublesome to install!).Time-Sert inserts are solid, and also have a flared shoulder that prevents leakage, and locks the insert into place without excessive Loctite needed. The repair process is to drill out the old threads, then use the shoulder cutting tool (To make room for the insert's shoulder on the top), tap the hole, then install the new insert. Hole will be repaired, and will be stronger and better than it was when it was new, due to the larger diameter holding power!
|
|
|
|
|
|
|
|
|
|
Time-Sert Thread Repair Insert, 5/16-24 x .620" Long, 05623
|
Price: $4.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Time-Sert Thread Repair Insert, 5/16-24 x .620" Long, 05623 is the best thread repair kit available. This size is typically used to repair Sig Erson or Gene Berg Rocker Arms, when the threads in the Adjusting Screw get buggered up. Inserts are sold per EACH.Time-Sert inserts are superior in every way to typical "Heli Coil" thread repair kits (which are usually wrapped wire, very weak and troublesome to install!). Time-Sert inserts are solid, and also have a flared shoulder that prevents leakage, and locks the insert into place without excessive Loctite needed. The repair process is to drill out the old threads, then use the shoulder cutting tool (To make room for the insert's shoulder on the top), tap the hole, then install the new insert. Hole will be repaired, and will be stronger and better than it was when it was new, due to the larger diameter holding power!
|
|
|
|
|
|
|
|
|
|
Time-Sert Thread Repair Insert, 6 x 1 x 9.4mm Long, 16101
|
Price: $4.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
|
|
|
Time-Sert Thread Repair Insert, 6 x 1 x 9.4mm, 16101 is the best thread repair kit available. This size is typically used to repair oil drain plate studs on Type 1, 2, and 3 engines. You can also repair stripped threads on deep sumps with it! Inserts are sold per EACH.Time-Sert inserts are superior in every way to typical "Heli Coil" thread repair kits (which are usually wrapped wire, very weak and troublesome to install!). Time-Sert inserts are solid, and also have a flared shoulder that prevents leakage, and locks the insert into place without excessive Loctite needed. The repair process is to drill out the old threads, then use the shoulder cutting tool (To make room for the insert's shoulder on the top), tap the hole, then install the new insert. Hole will be repaired, and will be stronger and better than it was when it was new, due to the larger diameter holding power!
|
|
|
|
