OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Carbs & Fuel System > Linkage Kits and Parts
56 products found
Sort By:
1 2
CB Performance Hex Bar Centering Spring (Throttle Shaft Centering Spring), for CB Cross Bars, EACH, CB3364
CB Performance Hex Bar Centering Spring (Throttle Shaft Centering Spring), for CB Cross Bars, EACH, CB3364
Price: $2.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

CB Performance Hex Bar Centering Spring (Throttle Shaft Centering Spring), for CB Cross Bars, EACH, CB3364 keeps the hex bar centered between the linkage mounts, as the engine expands and contracts with temperature. We shim it tight when cold!

You need 2 of these for each engine, one at either end of the hex bar, they fit inside the bar end, and push against the bar pivot. more info
Carburetor Linkage Arm (Shaft Lever), Fit Dellorto DRLA and FRD, and Weber IDF, Each, CB3406
Carburetor Linkage Arm (Shaft Lever), Fit Dellorto DRLA and FRD, and Weber IDF, EACH, CB3406
Price: $2.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Carburetor Linkage Arm (Shaft Lever), Fit Dellorto DRLA and FRD, and Weber IDF, Each, CB3406 help get your linkage syncronized, so they open and close at the same time and rate! Use this IN ADDITION TO the stock arm, which has the idle speed screw. more info
Linkage Heim Joint Extension, 1 1/8" Long, Left Side Weber IDF and Dellorto DRLA, 3395
Linkage Heim Joint Extension, 1 1/8" Long, Left Side Weber IDF and Dellorto DRLA, 3395
Price: $3.95

Linkage Heim Joint Extension, 1 1/8" Long, Left Side Weber IDF and Dellorto DRLA, 3395 is used to correct the linkage down rod geometry angle, by spacing the carburetor heim joint out away from the linkage arm. This equalizes the down rod angles on both sides, for a more even linkage operation and synchronization at all throttle positions. Simply remove your heim joint from the carb arm, then bolt this in the same place. Now thread the heim joint into the end of this, and re-syncronize your carbs. more info
Linkage Heim Joint Extension, 2" Long, Left Side Weber ICT and Dellorto FRD, 3396
Linkage Heim Joint Extension, 2" Long, Left Side Weber ICT and Dellorto FRD, 3396
Price: $3.95

Linkage Heim Joint Extension, 2" Long, Left Side Weber ICT and Dellorto FRD, 3396 is used to correct the linkage down rod geometry angle, by spacing the carburetor heim joint out away from the linkage arm. This equalizes the down rod angles on both sides, for a more even linkage operation and synchronization at all throttle positions. Simply remove your heim joint from the carb arm, then bolt this in the same place. Now thread the heim joint into the end of this, and re-syncronize your carbs. more info
Throttle Cable Guide Tube, 1967 and Later Upright Engines, 043-129-893
Throttle Cable Guide Tube, 1967 and Later Upright Engines, 043-129-893
Price: $5.95

Throttle Cable Guide Tube, 1967 and Later Upright Engines, 043-129-893 allows the throttle cable a nice straight run through the fan shroud, without getting cut up or kinked. When installed you don't see this tube, but it's really important! more info
Weber Progressive Linkage Throttle Arm, Fits DFAV/DFEV, EACH, 3358
Weber Progressive Linkage Throttle Arm, Fits DFAV/DFEV, EACH, 3358
Price: $5.95

Weber Progressive Linkage Throttle Arm, Fits DFAV/DFEV, EACH, 3358 replaces the lost or bent arm on your progressive carburetor. This is a good way to restore your linkage and get that throttle action back to normal. These are often missing or bent from POs. more info
Throttle Cable Guide Tube Assembly, With Spring, 111-198-002
Throttle Cable Guide Tube Assembly, With Spring, 111-198-002
Price: $8.95

Throttle Cable Guide Tube Assembly, With Spring, 111-198-002 is that cool tube and spring assembly that fits between the stock carb and the fan shroud. It was originally used on models up through the 1965 model year. It's an additional return spring! more info
Linkage Ball Joint (Heim Joint), LEFT HAND THREAD, Fits both CB or Redline Linkages for IDA, IDF and ICT, EACH
Linkage Ball Joint (Heim Joint), LEFT HAND THREAD, Fits both CB or Redline Linkages for IDA, IDF and ICT, EACH
Price: $9.95

Linkage Ball Joint (Heim Joint), LEFT HAND THREAD, Fits both CB or Redline Linkages for IDA, IDF and ICT, EACH replaces that linkage ball joint that is too loose, too tight, or that stripped out! The RHT or LHT refers to the down rod threads. The down rods are rotated to make the down rods longer or shorter, when setting the linkage up to match your syncronized carburetors!

Each linkage has one LHT and one RHT Ball Joint on EACH SIDE (4 total). more info
Linkage Ball Joint (Heim Joint), RIGHT HAND THREAD, Fits both CB or Redline Linkage for IDA, IDF and ICT, EACH
Linkage Ball Joint (Heim Joint), RIGHT HAND THREAD, Fits both CB or Redline Linkage for IDA, IDF and ICT, EACH
Price: $9.95

Linkage Ball Joint (Heim Joint), RIGHT HAND THREAD, Fits both CB or Redline Linkage for IDA, IDF and ICT, EACH replaces that linkage ball joint that is too loose, too tight, or that stripped out! The RHT or LHT refers to the down rod threads. The down rods are rotated to make the down rods longer or shorter, when setting the linkage up to match your syncronized carburetors!

Each linkage has one LHT and one RHT Ball Joint on EACH SIDE (4 total). more info
Weber 34 ICT Carb Sync Adapter (Also Fits EMPI 34 EPC)
Weber 34 ICT Carb Sync Adapter (Also Fits EMPI 34 EPC)
Price: $11.95

Weber 34 ICT Carb Sync Adapter (Also Fits EMPI 34 EPC) is a durable molded urethane sync adapter which allows you to use the SK or BK syncs on the Weber ICT and EMPI 34 EPC carburetors. Normally you can't because the ID of the carb top is not round, and the Snail Gauge will leak! This solves that problem on the ICT and EPC carburetors. more info
Kadron Carb Sync Adapter for Carb Syncronizer, KADRON-SYNC-ADAPTER
Kadron Carb Sync Adapter for Carb Syncronizer, KADRON-SYNC-ADAPTER
Price: $13.95

Kadron Carb Sync Adapter for Carb Syncronizer, KADRON-SYNC-ADAPTER is molded from durable Urethane, this sync adapter clears the tall air filter stud on Kadron carburetors, and it allows you to properly syncronize them (instead of GUESSING). You can use an old Pringles Can, but this looks better in the toolbox/garage! more info
CB Performance Air Filter Top, Fits Weber IDF & Dellorto DRLA, EACH, CB3300
CB Performance Air Filter Top, Fits Weber IDF & Dellorto DRLA, EACH, CB3300
Price: $17.95

CB Performance Air Filter Top, Fits Weber IDF & Dellorto DRLA, EACH, CB3300 are for you guys that have lost your filter tops, or want one that looks new (instead of all beat up). This is a very visible part of your engine! more info
BK Carb Syncronizer Adapter (Big Syncronizer to Small Carburetor), STE-118
BK Carb Syncronizer Adapter (Big Syncronizer to Small Carburetor), STE-118
Price: $19.95

BK Carb Syncronizer Adapter (Big Syncronizer to Small Carburetor), STE-118 is used to adapter the large BK Carb Sync Tool to the smaller IDF, Kadron, and ICT carburetors. This simply adapts the huge adapter to the small carb top. more info
CB Performance Air Filter Base With NO Linkage Mounting, Fits Weber IDF & Dellorto DRLA, EACH, 3337
CB Performance Air Filter Base With NO Linkage Mounting, Fits Weber IDF & Dellorto DRLA, EACH, 3337
Price: $19.95

CB Performance Air Filter Base With NO Linkage Mounting, Fits Weber IDF & Dellorto DRLA, EACH, 3337 is for you guys who are going to run a center pull or cable linkage, and want a cleaner look with no mounts on the filter base. These fit the standard CB Filter Elements, and these are used on both sides. more info
Uni Sync Carb Syncronizing Tool, ICT, FRD, Kadron, and PDSIT
Uni Sync Carb Syncronizing Tool, ICT, FRD, Kadron, and PDSIT
Price: $21.95

Uni Sync Carb Syncronizing Tool, ICT, FRD, Kadron, and PDSIT is an excellent tool for synchronizing dual 1bbl carburetors. YOU SHOULD NOT USE THIS WITH DUAL 2BBL CARBURETORS, because it's a restrictive device. On externally vented float bowls used on the Weber IDF, DCNF, IDA, and DCOE, and the Dellorto DRLA and DHLA it disrupts fuel level! With dual 2bbls use our Snail Gauge.

This fits flat on the barrel (mouth) of the carburetor. It requires an extension or adapter for Kadrons due to the centrally located air filter mounting stud.

 more info
CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA LEFT, For OFFSET INTAKE MANIFOLDS, 3414
CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA LEFT, For OFFSET INTAKE MANIFOLDS, 3414
Price: $24.95

CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA LEFT, For OFFSET INTAKE MANIFOLDS, 3414 is for you guys that have "Straight Intake" linkage, and want to use it on your Offset Intakes! Fits the standard CB Filter Elements too! This is the LEFT base plate, to fit the carburetor on the 3/4 cylinder side. more info
CB Performance Weber and Dellorto Linkage Adapters, Use Stock 356/912 Linkage with Weber or Dellorto Carburetors, Pair, CB3409
CB Performance Weber and Dellorto Linkage Adapters, Use Stock 356/912 Linkage with Weber or Dellorto Carburetors, PAIR, CB3409
Price: $24.95

CB Performance Weber and Dellorto Linkage Adapters, Use Stock 356/912 Linkage with Weber or Dellorto Carburetors, Pair, CB3409 allows you to retain your stock 356/912 factory carb linkage, but with Weber or Dellorto carburetors! Better carbs, stock look! more info
CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA RIGHT, For OFFSET INTAKE MANIFOLDS, 3413
CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA RIGHT, For OFFSET INTAKE MANIFOLDS, 3413
Price: $27.95

CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA RIGHT, For OFFSET INTAKE MANIFOLDS, 3413 is for you guys that have "Straight Intake" linkage, and want to use it on your Offset Intakes! Fits the standard CB Filter Elements too! This is the RIGHT base plate, to fit the carburetor on the 1/2 cylinder side. more info
Linkage Rod Kit, 5 1/4" Long Overall (3 5/8" Rods), PAIR, CB 3320
Linkage Rod Kit, 5 1/4" Long Overall (3 5/8" Rods), PAIR, CB 3320
Price: $27.95

Linkage Rod Kit, 5 1/4" Long Overall (3 5/8" Rods), PAIR, CB 3320 include 4 new heim joints (L/R), two linkage rods, and locking hardware. This is a good way to restore your linkage and get that throttle action back to normal. more info
Linkage Rod Kit, 7 1/2" Long Overall (5 7/8" Rods), PAIR, CB 3321
Linkage Rod Kit, 7 1/2" Long Overall (5 7/8" Rods), PAIR, CB 3321
Price: $27.95

Linkage Rod Kit, 7 1/2" Long Overall (5 7/8" Rods), PAIR, CB 3321 include 4 new heim joints (L/R), two linkage rods, and locking hardware. This is a good way to restore your linkage and get that throttle action back to normal. more info
CB Performance Steel Hex Bar (Linkage Cross Bar), 20 1/8", Bar ONLY, CB3352
CB Performance Steel Hex Bar (Linkage Cross Bar), 20 1/8", Bar ONLY, CB3352
Price: $27.95

CB Performance Steel Hex Bar (Linkage Cross Bar), 20 1/8", Bar ONLY, CB3352 is to replace the bar that is too short, or the one that is worn out on the inside of the ends, and the bar is no longer snug on the end pivots! This is the same bar that is used in the complete CB Carb Kits, Linkage and Filter Kits, or the Linkage Kits. more info
CB Performance Steel Hex Bar (Linkage Cross Bar), 19", Bar ONLY, CB3351
CB Performance Steel Hex Bar (Linkage Cross Bar), 19", Bar ONLY, CB3351
Price: $27.95

CB Performance Steel Hex Bar (Linkage Cross Bar), 19", Bar ONLY, CB3351 replaces a bar that is too short, or the one that is worn out on the inside of the ends, and the bar is no longer snug on the end pivots! This is the same bar that is used in the complete CB Carb Kits, Linkage and Filter Kits, or the Linkage Kits. more info
CB Performance Steel Hex Bar (Linkage Cross Bar), 17 3/8", Bar ONLY, CB3350
CB Performance Steel Hex Bar (Linkage Cross Bar), 17 3/8", Bar ONLY, CB3350
Price: $27.95

CB Performance Steel Hex Bar (Linkage Cross Bar), 17 3/8", Bar ONLY, CB3350 replaces a bar that is too short, or the one that is worn out on the inside of the ends, and the bar is no longer snug on the end pivots! This is the same bar that is used in the complete CB Carb Kits, Linkage and Filter Kits, or the Linkage Kits. more info
CB Performance Steel Hex Bar (Linkage Cross Bar), 18", Bar ONLY, CB3346
CB Performance Steel Hex Bar (Linkage Cross Bar), 18", Bar ONLY, CB3346
Price: $27.95

CB Performance Steel Hex Bar (Linkage Cross Bar), 18", Bar ONLY, CB3346 replaces a bar that is too short, or the one that is worn out on the inside of the ends, and the bar is no longer snug on the end pivots! This is the same bar that is used in the complete CB Carb Kits, Linkage and Filter Kits, or the Linkage Kits. more info
CB Performance Steel Hex Bar (Linkage Cross Bar), 21 1/8", Bar ONLY, CB3356
CB Performance Steel Hex Bar (Linkage Cross Bar), 21 1/8", Bar ONLY, CB3356
Price: $27.95

CB Performance Steel Hex Bar (Linkage Cross Bar), 21 1/8", Bar ONLY, CB3356 replaces a bar that is too short, or the one that is worn out on the inside of the ends, and the bar is no longer snug on the end pivots! This is the same bar that is used in the complete CB Carb Kits, Linkage and Filter Kits, or the Linkage Kits. more info
CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA RIGHT, For STRAIGHT INTAKE MANIFOLDS, CB6481
CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA RIGHT, For STRAIGHT INTAKE MANIFOLDS, CB6481
Price: $27.95

CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA RIGHT, For STRAIGHT INTAKE MANIFOLDS, CB6481 is for you guys that have Straight Intake Manifolds, and need to use your CB Linkage with them! Fits the standard CB Filter Elements too! This is the RIGHT base plate, to fit the carburetor on the 1/2 cylinder side. more info
CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA LEFT, For STRAIGHT INTAKE MANIFOLDS, CB6482
CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA LEFT, For STRAIGHT INTAKE MANIFOLDS, CB6482
Price: $27.95

CB Performance Air Filter and Throttle Linkage Base, Fits Weber IDF & Dellorto DRLA LEFT, For STRAIGHT INTAKE MANIFOLDS, CB6482 is for you guys that have Straight Intake Manifolds, and need to use your CB Linkage with them! Fits the standard CB Filter Elements too! This is the LEFT base plate, to fit the carburetor on the 3 and 4 cylinder side. more info
CB Performance Steel Hex Bar (Linkage Cross Bar), 21 3/4", Bar ONLY, CB3353
CB Performance Steel Hex Bar (Linkage Cross Bar), 21 3/4", Bar ONLY, CB3353
Price: $27.95

CB Performance Steel Hex Bar (Linkage Cross Bar), 21 3/4", Bar ONLY, CB3353 replaces a bar that is too short, or the one that is worn out on the inside of the ends, and the bar is no longer snug on the end pivots! This is the same bar that is used in the complete CB Carb Kits, Linkage and Filter Kits, or the Linkage Kits. more info
CB Performance Steel Hex Bar (Linkage Cross Bar), 22 1/2", Bar ONLY, CB3354
CB Performance Steel Hex Bar (Linkage Cross Bar), 22 1/2", Bar ONLY, CB3354
Price: $27.95

CB Performance Steel Hex Bar (Linkage Cross Bar), 22 1/2", Bar ONLY, CB3354 replaces a bar that is too short, or the one that is worn out on the inside of the ends, and the bar is no longer snug on the end pivots! This is the same bar that is used in the complete CB Carb Kits, Linkage and Filter Kits, or the Linkage Kits. more info
Redline Diagonal Arm Kit, Fits IDF and ICT Redline Crossbar Linkage, Upright and Type 4 Engines, Pair, 99006.912
Redline Diagonal Arm Kit, Fits IDF and ICT Redline Crossbar Linkage, Upright and Type 4 Engines, PAIR, 99006.912
Price: $34.95

Redline Diagonal Arm Kit, Fits IDF and ICT Redline Crossbar Linkage, Upright and Type 4 Engines, Pair, 99006.912 replaces diagonal arms that are cracked, usually from over-tightening the securing bolts! Be sure to tighten them just so the arms won't slide across. Too much and you get the dreaded CRACK! more info
Snail Type Syncrometer Carb Sync Tool, CHINESE or TAIWAN, SK Model
Snail Type Syncrometer Carb Sync Tool, CHINESE or TAIWAN, SK Model
Price: $44.95

The best style of carburetor syncronizing tool made to syncronize dual carburetors. Rather than measuring manifold vacuum via a restriction, it sensitively and accurately measures airflow WITHOUT RESTRICTION. Econo model for guys on a budget.

This fits inside the barrel (mouth) of the carburetor. It requires an adapter for non-round "Internal" carb throats such as ICTs and DCNFs. It also requires an adapter for Kadrons due to the centrally located air filter mounting stud.

This is the less expensive ECONO model (made in China or Taiwan), NO GUARANTEE OR WARRANTY ON IT!

 more info
Weber IDF Linkage Hardware Repair Kit, 99004.913
Weber IDF Linkage Hardware Repair Kit, 99004.913
Price: $49.95

Weber IDF Linkage Hardware Repair Kit, 99004.913 replaces the carb arms (with throttle stops), spacers, and lock washers for IDF webers when used with a crossbar linkage system. Kit will do BOTH carburetors. more info
Snail Type Syncrometer Carb Sync Tool, GERMAN, SK Model
Snail Type Syncrometer Carb Sync Tool, GERMAN, SK Model
Price: $59.95

The best carburetor syncronizing tool made for us to syncronize dual carburetors. Rather than measuring manifold vacuum via a restriction, it sensitively and accurately measures airflow WITHOUT RESTRICTION. This is the top quality GERMAN SK Gauge.

This fits inside the barrel (mouth) of the carburetor. It requires an adapter for non-round "Internal" carb throats such as ICTs and DCNFs. It also requires an adapter for Kadrons due to the centerally located air filter mounting stud.

This Sync Model is ideal for all velocity stack and carb throats of 1 5/8 to 2 1/8" (40 to 55mm Diameter).

 more info
Snail Type Syncrometer Carb Sync Tool, GERMAN, BK
Snail Type Syncrometer Carb Sync Tool, GERMAN, BK Model
Price: $59.95

Snail Type Syncrometer Carb Sync Tool, GERMAN, BK is the best carburetor syncronizing tool made for us to syncronize the Weber 48 IDA or EMPI 48 and 51 EPC carburetors. Rather than measuring manifold vacuum via a restriction, it sensitively and accurately measures airflow WITHOUT RESTRICTION. This is the top quality GERMAN BK Gauge.

This fits inside the barrel (mouth) of the carburetor, fitting airhorns from 2" (51mm) to 2 5/8" (67mm) in diameter. It requires an adapter to use on the smaller Weber IDF and Dellorto DRLA carburetors.

 more info
CB Performance Cross Bar Linkage Pack, Hex Bar NOT Included, CB3144
CB Performance Cross Bar Linkage Pack, Hex Bar NOT Included, CB3144
Price: $69.95

CB Performance Cross Bar Linkage Pack, Hex Bar NOT Included, CB3144 includes a lot of hard to find parts in one kit!  This kit has everything but the air filter bases and the cross bar (Hex bar). more info
SCAT Centerpull Linkage, (Twist Linkage), Dual Carbs on UPRIGHT ENGINES ONLY, Fits Dellorto DRLA, Weber IDF/IDA/ICT/DCNF, Kadron, and Solex PDSIT, 30050
SCAT Centerpull Linkage, (Twist Linkage), Dual Carbs on UPRIGHT ENGINES ONLY, Fits Dellorto DRLA, Weber IDF/IDA/ICT/DCNF, Kadron, and Solex PDSIT, 30050
Price: $74.95

SCAT Centerpull Linkage, (Twist Linkage), Dual Carbs on UPRIGHT ENGINES ONLY, Fits Dellorto DRLA, Weber IDF/IDA/ICT/DCNF, Kadron, and Solex PDSIT, 30050 is an inexpensive linkage for Weber, Dellorto, and Kadron Dual Carburetors. Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage, like some buggies and trikes. Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good for as inexpensive as it is. This linkage only fits the upright engine, it does NOT fit Type 3 nor Type 4 engines!

TIP: For an inexpensive return spring, use a stock spring and connect it from the barrel clamp on the center of this linkage, and run it through a hole drilled into the rim of the alternator. Simple and works very well!

 more info
Idle Mixture Adjustment Tool, 90 Degree End For Tight Spaces, EACH
Idle Mixture Adjustment Tool, 90 Degree End For Tight Spaces, EACH
Price: $94.95

Idle Mixture Adjustment Tool, 90 Degree End For Tight Spaces, EACH is THE tool to have for carburetors with difficult to access idle mixture screws. Stop dealing with "close enough" because you can't adequately manage the screws, USE THIS! Tool is indexed for a firm "Click" every 1/8 turn, no guessing! more info
Bugpack Pro/Comp Hex Crossbar Linkage, Weber 48 IDA
Bugpack Pro/Comp Hex Crossbar Linkage, Weber 48 IDA
Price: $134.95

Bugpack's finest linkage in the Weber IDA version for your VW bug, ghia, or even bus! more info
Redline Pro-Hex Carburetor Linkage Kit, Dual Weber 34 ICTs, Single and Dual Port Upright Engine, 99007.411
Redline Pro-Hex Carburetor Linkage Kit, Dual Weber 34 ICTs, Single and Dual Port Upright Engine, 99007.411
Price: $149.95

Redline Pro-Hex Carburetor Linkage Kit, Dual Weber 34 ICTs, Single and Dual Port Upright Engine, 99007.411 is the same linkage as used in our Redline Dual ICT kits for the upright engines. It's the finest crossbar linkage you can get for baby Webers! Easy to install and adjust, and very smooth in operation! more info
Redline Dual IDF/DRLA Steel Crossbar Linkage Kit, Type 4 Engines, 99004.295
Redline Dual IDF/DRLA Steel Crossbar Linkage Kit, Type 4 Engines, 99004.295
Price: $179.95

Redline Dual IDF/DRLA Steel Crossbar Linkage Kit, Type 4 Engines, 99004.295 is for folks that already have their intake manifolds and air filters, but need a GOOD quality linkage to finish off their dual carburetors! Steel linkage parts are very durable. more info
Vintage Speed Centerpull Linkage, (Twist Linkage), Type 4 Engine With Dual Carbs, Fits Dellorto DRLA, Weber IDF, IDA, and DCNF, 155-401-021
Vintage Speed Centerpull Linkage, (Twist Linkage), for TYPE 4 Engine With Dual Carbs, Fits Dellorto DRLA, Weber IDF, IDA, and DCNF, 155-401-021
Price: $189.95

Vintage Speed Centerpull Linkage, (Twist Linkage), Type 4 Engine With Dual Carbs, Fits Dellorto DRLA, Weber IDF, IDA, and DCNF, 155-401-021 is similar to the CSP linkage, down and out of the way! This linkage isn't affected by engine temperatures!

Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage that sits up high, crossbar linkage hits the bodywork on some some buggies and trikes. But a lot of Beetle and Bus guys also prefer this linkage style, it's simple and works! Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good! more info
Vintage Speed Centerpull Linkage, (Twist Linkage) for TYPE 4 Engine with Dual Carbs AND UPRIGHT FAN HOUSING, Fits Dellorto DRLA, Weber IDF, and DCNF, 155-401-031
Vintage Speed Centerpull Linkage, (Twist Linkage) for TYPE 4 Engine with Dual Carbs AND UPRIGHT FAN HOUSING, Fits Dellorto DRLA, Weber IDF, and DCNF, 155-401-031
Price: $189.95

Vintage Speed Centerpull Linkage, (Twist Linkage) for TYPE 4 Engine with Dual Carbs AND UPRIGHT FAN HOUSING, Fits Dellorto DRLA, Weber IDF, and DCNF, 155-401-031 is similar to the CSP linkage, down and out of the way! This linkage isn't affected by engine temperatures either! Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage that sits up high, crossbar linkage hits the bodywork on some some buggies and trikes. But a lot of Bus guys also prefer this linkage style, it's simple and works! Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good! more info
Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Dellorto DRLA, Weber ICT, 155-001-02-ICT
Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Dellorto DRLA, Weber ICT, 155-001-02ICT
Price: $189.95

Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Dellorto DRLA, Weber ICT, 155-001-02-ICT (formerly 315-001-02ICT) is similar to the CSP linkage, down and out of the way! This linkage isn't affected by engine temperatures either! Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage that sits up high, crossbar linkage hits the bodywork on some some buggies and trikes. But a lot of Beetle and Bus guys also prefer this linkage style, it's simple and works! Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good! more info
Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Weber IDA, 155-001-02IDA
Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Weber IDA, 155-001-02IDA
Price: $189.95

Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Weber IDA, 155-001-02IDA (formerly 315-001-02IDA) is similar to the CSP linkage, down and out of the way! This linkage isn't affected by engine temperatures either! Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage that sits up high, crossbar linkage hits the bodywork on some some buggies and trikes. But a lot of Beetle and Bus guys also prefer this linkage style, it's simple and works! Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good! more info
Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Kadron and EMPI EPC, 155-001-02KDR
Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Kadron and EMPI EPC, 155-001-02KDR
Price: $189.95

Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Kadron and EMPI EPC, 155-001-02KDR (formerly 315-001-02KDR) is similar to the CSP linkage, down and out of the way! This linkage isn't affected by engine temperatures either! Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage that sits up high, crossbar linkage hits the bodywork on some some buggies and trikes. But a lot of Beetle and Bus guys also prefer this linkage style, it's simple and works! Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good! more info
Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Dellorto DRLA, Weber IDF, and DCNF, Upright Engines, 155-001-02IDF
Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Dellorto DRLA, Weber IDF, and DCNF, Upright Engines, 155-001-02IDF
Price: $189.95

Vintage Speed Centerpull Linkage, (Twist Linkage), Dual Carbs, Fits Dellorto DRLA, Weber IDF, and DCNF, Upright Engines, 155-001-02IDF (formerly 315-001-02IDF) is similar to the CSP linkage, down and out of the way! This linkage isn't affected by engine temperatures either! Twist or Pivot Linkage are a solution for engines with no room for crossbar linkage that sits up high, crossbar linkage hits the bodywork on some some buggies and trikes. But a lot of Beetle and Bus guys also prefer this linkage style, it's simple and works! Though this is called a "Centerpull" or "Twist" linkage, it's actually a "Push/Pull" linkage, but it's very good! more info
CB Performance Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 1 Engines with NON-Offset Intakes, 6485
CB Performance Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 1 Engines with NON-Offset Intakes, 6485
Price: $194.95

CB Performance Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 1 Engines with NON-Offset Intakes, 6485 is a great way to rejuvenate your dual carb kit, with the hammered linkage and filters, when your intakes are fine!

Quality CB parts all match in appearance, and they work very well together! This kit is designed for non-offset intake manifolds that do NOT center the carburetors on the offset flat-4 Aircooled VW Engine. Kit includes filters, and all linkage, does NOT include carburetors nor intake manifolds.

 more info
CB Performance Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 1 Engines, 3143
CB Performance Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 1 Engines, 3143
Price: $199.95

CB Performance Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 1 Engines, 3143 is a great way to rejuvinate your dual carb kit, with the hammerred linkage and filters,w hen your intakes are fine!

Quality CB parts all match in appearance, and they work very well together! This kit is designed for Offset intake manifolds that center the carburetors on the offset flat-4 Aircooled VW Engine. Kit includes filters, and all linkage, does NOT include carbs nor intake manifolds.

 more info
Redline Dual IDF/DRLA Steel Crossbar Linkage Kit, Pro Style Hex, Upright Engines with Offset Intake Manifolds, 99004.912
Redline Dual IDF/DRLA Steel Crossbar Linkage Kit, Pro Style Hex, Upright Engines with Offset Intake Manifolds, 99004.912
Price: $199.95

Redline Dual IDF/DRLA Steel Crossbar Linkage Kit, Pro Style Hex, Upright  Engines with Offset Intake Manifolds, 99004.912 is for folks that already have their offset intake manifolds and air filters, but need a GOOD quality linkage to finish off their dual carburetors! Steel linkage parts are very durable. This kit is 100% independent of the air filters, so many guys run this instead of CB linkage if they are omitting filters, or that want to have Chrome or K&N Air Filters. more info
CB Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 4 Engine, 3129
CB Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 4 Engine, 3129
Price: $199.95

CB Linkage and Air Filter Kit, Weber IDF and Dellorto DRLA, Type 4 Engine, 3129 is a great way to complete your recently acquired dual IDF Weber or DRLA Dellortos that were missing all these parts, or where they were worn out! Quality CB parts all match in appearance, and they work very well together!

This is a great kit to get when you find a cherry set of Weber IDFs or Dellorto DRLAs at the swap meet, or if your filters and intakes have taken a beating, since normally the intakes are re-usable. No worries, this kit will get you going quickly!

This is the same filters and linkage that is shipped in our complete carburetor kits.

 more info
   
 
1 2
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.