OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Carbs & Fuel System >

Weber IDF Idle Mixture Screw, 64750.003
Weber IDF Idle Mixture Screw, 64750.003


 
Weber IDF Idle Mixture Screw, 64750.003 is the small screw at the carburetor base, it micro-adjusts the pre-mixed fuel and air from the idle jet and idle air bleed. This allows you to adjust the A/F mixture ONLY AT IDLE. These are often bent or grooved.

Proper idle mixture setting is achieved by fully warming up the engine, set your ignition timing and idle speed. Turn the idle mixture screw to fastest idle speed. it's best to turn it in too far 1 bbl at a time (bottom it out lightly, idle speed will drop as you lose a cylinder), and as you turn it out the cylinder will come back, picking up idle speed. Set for fastest idle, + 1/2 turn out (richer). The extra 1/2 turn makes for a more STABLE idle (not a better one).

Any tmie you change the idle speed, carb sync, idle jet size, or ignition timing, you must re-set the idle mixture!
Price: $9.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies


: 64750.003


QTY:
Overview
 
Weber IDF Idle Mixture Screw, 64750.003 is the small screw at the carburetor base, it micro-adjusts the pre-mixed fuel and air from the idle jet and idle air bleed. This allows you to adjust the A/F mixture ONLY AT IDLE. These are often bent or grooved.

Proper idle mixture setting is achieved by fully warming up the engine, set your ignition timing and idle speed. Turn the idle mixture screw to fastest idle speed. it's best to turn it in too far 1 bbl at a time (bottom it out lightly, idle speed will drop as you lose a cylinder), and as you turn it out the cylinder will come back, picking up idle speed. Set for fastest idle, + 1/2 turn out (richer). The extra 1/2 turn makes for a more STABLE idle (not a better one).

Any tmie you change the idle speed, carb sync, idle jet size, or ignition timing, you must re-set the idle mixture!

Related Items...
IDF Redline-Weber Rebuild Kit, 40/44/48 IDF, EACH, 92.3240.05
Price: $39.95
IDF Genuine Weber Rebuild Kit, 40/44/48 IDF, Each, 92.3240.05
Weber IDF, DCNF, and DFAV/EV Idle Jet O-ring and Idle Mixture Screw O-ring, 41565.002
Price: $1.25
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
Weber IDF, DCNF, and DFAV/EV Idle Jet O-ring and Idle Mixture Screw O-ring, 41565.002
Weber IDF Idle Mixture Screw Seat Repair Kit (5 pcs), CB6381
Price: $24.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
Weber IDF Idle Mixture Screw Seat Repair Kit, CB6381

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.