|
|
|
|
Web Cam Hydraulic Lifters, Type 4 Engines, Set of 8, 00-914 ( or 00-916) are compatible with Web Cam brand Type 4 Hydraulic Camshafts. NEVER EVER INSTALL A NEW CAMSHAFT WITHOUT NEW COMPATIBLE LIFTERS IN YOUR VOLKSWAGEN ENGINE! These are an iron lifter that is precision ground and specially hardened, to be compatible with all new hydraulic grinds from WEB CAM
WARRANTY INFO: Warranty coverage for this item is PROVIDED BY MANUFACTURER Length of Warranty: 6 Months from date of Purchase (or date of shipment whichever is longer). Procedure: Warranty claims must be made DIRECTLY to Web-Cam, Inc. WEB-CAM, Inc. warrants all hardwelded and new camshafts against excessive cam lobe wear for a period of 6 months from date of purchase. This warranty covers cam lobe wear only and does not cover broken cams, lifters, tappets, rocker arms or any other engine parts. WEB-CAM camshafts are considered racing parts and as such this warranty does not cover abnormal wear due to insufficient lubrication, excessive engine heat, valve spring coil bind and cylinder head or guide interference. In no event shall WEB-CAM, Inc. be liable for labor or service charges from the replacement, removal, installation or shipping of camshafts or related parts. Should your cam lobes wear excessively during the warranty period, return them to WEB-CAM, with proof of purchase. WEB-CAM will inspect your cam and repair or replace (at the WEB-CAM's discretion), under the terms of the warranty, at a cost not to exceed 50% of list price plus freight.
DISCLAIMER: WHEN YOU INSTALL A NEW CAMSHAFT, YOU MUST ALSO INSTALL A SET OF NEW COMPATIBLE LIFTERS IN YOUR VOLKSWAGEN ENGINE. Neglecting to do so will void any/all warranty. So be sure to purchase both cam and lifters together for full warranty coverage.
RETURNS: Web-Cam brand Camshafts are "designer cams" and are NON-RETURNABLE. This is because most configurations and grinds are CUSTOM-MADE-TO-ORDER or SPECIAL ORDER.
|
|
|
|
|
|
|
|
Related Items... |
Bolt On Cam Gear, Type 4, TYPE-4-BOLT-ON-CAM-GEAR
|
|
|
|
Standard Thrust Cam Bearings, Type 4 Based Engines, 021-198-541
|
|
|
|
Web Cam Type 4 "Hydraulic" Camshaft, 107i Grind, (255 Duration, .430" Lift), 00-612
|
|
|
|
Web Cam Type 4 "Hydraulic" Camshaft, 91 Grind, (265 Duration, .430" Lift), 00-422
|
|
|
|
|
|