OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Fuel Injection > Beetle 75-79
29 products found
Sort By:
1
Fuel Injector Seal (Between Injector and Intake Manifold), Small, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-261A
Fuel Injector Seal (Between Injector and Intake Manifold), Small, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-261A
Price: $1.25

Fuel Injector Seal (Between Injector and Intake Manifold), Small, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-261A prevents annoying intake leaks between the injector and intake! You need 1 of these for EACH injector, don't forget the large injector seal between the injector and hold down clamp! more info
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, 311-129-777
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, 311-129-777
Price: $1.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, 311-129-777 is used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! This version with the flat blade head is preferred by many because they can quickly tighten or loosen it with a screwdriver, instead of finding that pesky 8mm wrench! more info
Fuel Injector Seal (Fuel Injector Retaining O-ring), Large, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-263
Fuel Injector Seal (Fuel Injector Retaining O-ring), Large, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-263
Price: $1.50

Fuel Injector Seal (Fuel Injector Retaining O-ring), Large, 1975-80 VW Beetle and Super Beetle, 1975-92 VW Bus and Vanagon, 1968-74 Type 3, and 1975-76 Porsche 914, EACH, 311-133-263 slips around a thin part of the injector, allowing the clamp to hold it! You need 1 of these for EACH injector, don't forget the small injector seal between the injector and intake manifold! more info
Barrel Clamp, Accelerator Cable and Heater Box Cable, 8 x 12mm, EACH, 111-129-921-311-129-777
Barrel Clamp HEX head, for Accelerator Cable and Heater Box Cable, 8 x 12mm, EACH, 111-129-921-311-129-777
Price: $1.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Barrel Clamp, Accelerator Cable and Heater Box Cable, 8 x 12mm, EACH, 111-129-921-311-129-777 are used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! more info
Band-Style Hose Clamp (OD range 7-9mm), EACH
Band-Style Hose Clamp, OD range 8-10mm (fits 5mm Fuel Hose), EACH
Price: $2.00

Band-Style Hose Clamp (OD range 8-10mm), EACH is great for vw fuel hose (5mm I.D.), both FI or carbureted. The band style prevents the clamp from cutting into the hose, which is a problem with traditional worm gear style clamps! These are the best clamps to use.

 more info
Band-Style 7mm Fuel Hose Clamp (OD range 10-12mm), EACH
Band-Style Hose Clamp, OD range 10-12mm (fits 7mm Fuel Hose), EACH
Price: $2.00

Band-Style 7mm Fuel Hose Clamp (OD range 10-12mm), EACH is great for vw fuel hose (7mm I.D.), both FI or carbureted. The band style prevents the clamp from cutting into the hose, which is a problem with traditional worm gear style clamps! These are the best clamps to use.

 more info
Rubber Mounting Damper, 6 x 1mm Thread, EACH, 9259-7
Rubber Mounting Damper, 6 x 1mm Thread, EACH, 00-9259-7
Price: $2.95

Rubber Mounting Damper, 6 x 1mm Thread, EACH, 9259-7 is often used to eliminate vibration from vibrating electric fuel pumps, or external oil coolers. This uses a 10 x 1mm stud on either end, for easy mounting! These have more uses than you think! Sold per EACH. more info
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads)
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads)
Price: $5.95

O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to plug the threaded bung up when you don't have the O2 sensor installed for whatever reason (IE: You are finished tuning). You can save wear/tear on the O2 sensor by saving it! more info
Barrel Clamp HEX head, Accelerator Cable and Heater Box Cable, 8 x 12mm, Pack of 5, 111-129-921
Barrel Clamp HEX head, for Accelerator Cable and Heater Box Cable, 8 x 12mm, Pack of 5, 111-129-921
Price: $6.95

Barrel Clamp, Accelerator Cable and Heater Box Cable, 8 x 12mm, Pack of 5, 111-129-921 are used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! more info
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, Pack of 5 Clamps, 311-129-777
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, Pack of 5 Clamps, 311-129-777
Price: $6.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, Pack of 5 Clamps, 311-129-777 is used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! This version with the flat blade head is preferred by many because they can quickly tighten or loosen it with a screwdriver, instead of finding that pesky 8mm wrench! more info
O2 Sensor BUNG (only), Stainless Steel
Stainless Steel O2 BUNG (only)
Price: $8.95

more info
Bosch Fuel Pump Relay (Mini-relay), EACH, 0332019150
Bosch Fuel Pump Relay (Mini-relay), EACH, 0332019150
Price: $9.95

Bosch Fuel Pump Relay (Mini-relay), EACH, 0332019150 is used to use a trigger voltage (from the ignition switch) to power a fuel pump directly to the battery, without overloading the ignition switch circuit. more info
7mm Hi Pressure Fuel Hose (Fuel Injection), 7.0 X 3.0mm, per Meter, N202811
7mm Hi Pressure Fuel Hose (Fuel Injection), 7.0 X 3.0mm, per Meter, N202811
Price: $13.00

7mm Hi Pressure Fuel Hose (Fuel Injection), 7.0 X 3.0mm, per Meter, N202811 is a HIGH PRESSURE hose compatible with the higher fuel pressures seen in FI systems. This is a smooth rubber hose that is easy to clean and lasts for years.

You can also use this outstanding hose on 7mm carbureted applications if you prefer the look of smooth rubber instead of the normally used cloth braided hose.

This hose is sold per METER.

 more info
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads)
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads)
Price: $14.95

O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning. more info
Intake Manifold Gasket, Fuel Injected Type 1 (1975+), Each, 043-129-707
Intake Manifold Gasket, Fuel Injected Type 1 (1975+), EACH, 043-129-707
Price: $16.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Intake Manifold Gasket, Fuel Injected Type 1 (1975+), Each, 043-129-707 prevent the head from the cylinder heads from overheating the fuel injectors. These often crack when removed, so replacement is recommended.

Price is for a single gasket, you need 2 of these to do one engine.

 more info
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads)
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads)
Price: $16.95

O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning. Stainless Steel for SS exhausts! more info
Engine Temperature Sensor (Fuel Injection Sensor), 1975-79 Type 1, 1977-83 Type 2, and 1970-73 Type 3, 022-906-041A (replacement for Bosch 0-280-130-012)
Engine Temperature Sensor (Fuel Injection Sensor), 1975-79 Type 1, 1977-83 Type 2, and 1970-73 Type 3, 022-906-041A (replacement for Bosch 0-280-130-012)
Price: $34.95

Engine Temperature Sensor (Fuel Injection Sensor), 1975-79 Type 1, 1977-83 Type 2, and 1970-73 Type 3, 022-906-041A (replacement for Bosch 0-280-130-012) signals the fuel injection computer what temperature the engine is at, and it makes the corresponding mixture adjustments! These often go bad, and result in a very rich running condition, because the computer "thinks" the engine is perpetually cold! more info
Bosch Fuel Injection & Engine Management
Bosch Fuel Injection & Engine Management
Price: $39.95

If you have an injected car, this book is a MUST. Extensive chapters on FI theory, and exceptional troubleshooting procedures. Complete theory, troubleshooting, service, and high performance tuning of Bosch fuel injection systems. Includes Motronic, L-Jetronic, KE-Jetronic, K-Jetronic and D-Jetronic systems. This is the ONLY book that fully explains how Bosch systems work and how to get the most out of racing and high performance tuning modifications. more info
Fuel Injection Intake Boot, 1975-79 Type 1 With Stock Fuel Injection, 043-129-617A-043-617A
Fuel Injection Intake Boot, 1975-79 Type 1 With Stock Fuel Injection, 043-129-617A-043-617A
Price: $69.95

Fuel Injection Intake Boot, 1975-79 Type 1 With Stock Fuel Injection, 043-129-617A-043-617A is a commonly cracked part on the stock fuel injection. These are VERY OFTEN cracked and the cause of erratic idling and stalling when hot. more info
Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, PRIOR TO 2/15/15, for use with 4.2 O2 Sensor, 3828
Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, PRIOR TO 2/15/15, for use with 4.2 O2 Sensor, 3828
Price: $84.95

Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, PRIOR TO 2/15/15, for use with 4.2 O2 Sensor, 3828 is for people that have the Innovate LC-2, MTX-L Gauge or Innovate LM-2, with the 4.2 O2 Sensor, but have a rear engined car! The harness that comes with the gauge is too short, so we had this one made! It's 18' long and will allow you to use your new Wideband toy!. This will allow you to use the LM-2 and MTX-L systems in all Rear and Mid-Engined VW and Porsche cars. Vanagons, Busses, 911s, Beetles, Ghias, etc. This does NOT fit the 4.9 O2 Sensors! more info
Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, AFTER 2/15/15, for use with 4.9 O2 Sensor, 3889
Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, AFTER 2/15/15, for use with 4.9 O2 Sensor, 3889
Price: $89.95

Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, AFTER 2/15/15, for use with 4.9 O2 Sensor, 3889 is for people that have the Innovate LC-2, MTX-L Gauge or Innovate LM-2, but have a rear engined car! The harness that comes with the gauge is too short, so we had this one made! It's 18' long and will allow you to use your new Wideband toy!. This will allow you to use the LM-2 and MTX-L systems in all Rear and Mid-Engined VW and Porsche cars. Vanagons, Busses, 911s, Beetles, Ghias, etc.

This does NOT fit the 4.2 O2 Sensors! more info
"Econo" Fuel Pump, Stock Fuel Injection, NEW, 1975-80 VW Beetle and Super Beetle, and 1975-92 VW Bus and Vanagon, and 1975-76 Porsche 914, 251-906-091
ECONO Fuel Pump, Stock Fuel Injection, NEW (not rebuilt!), 1975-80 VW Beetle and Super Beetle, and 1975-92 VW Bus and Vanagon, and 1975-76 Porsche 914, (replacement for 251-906-091)
Price: $89.95

"Econo" Fuel Pump, Stock Fuel Injection, NEW, 1975-80 VW Beetle and Super Beetle, and 1975-92 VW Bus and Vanagon, and 1975-76 Porsche 914, 251-906-091 is a fantastic replacement fuel pump, for around 1/2 of the Genuine Bosch Price, and we feel they are as good as Bosch! These are NEW, not rebuilt, for a long life. It's very important on Fuel Injected vehicles to never run out of fuel, because the gasoline is the coolant for the fuel pump! If you run out, the pump overheats and will die quickly! more info
Fuel Pressure Regulator, (Fuel Injection Engines), 1975-79 Type 1, and 1977-83 Type 2, (Replacement for Bosch 0-280-160-200)
Fuel Pressure Regulator, (Fuel Injection Engines), 1975-79 Type 1, and 1977-83 Type 2, (Replacement for Bosch 0-280-160-200)
Price: $99.95

Fuel Pressure Regulator, (Fuel Injection Engines), 1975-79 Type 1, and 1977-83 Type 2, (Replacement for Bosch 0-280-160-200) adjusts the fuel pressure based on load via a vacuum reading from the Intake Plenum. When these go bad they leak internally, or the pressure is wrong! Remove the vacuum hose, if you see fuel the diaphragm is shot! The pressures for testing are in the Bentley Manual. You can tee in a pressure gauge to check the pressures. more info
Fuel Pump Relay (Double Relay), 1975-79 Beetle and Super Beetle, 1975-83 Type 2, 0332514120
Fuel Pump Relay (Double Relay), 1975-79 Beetle and Super Beetle, 1975-83 Type 2, BOSCH 0332514120
Price: $99.95

Fuel Pump Relay (Double Relay), 1975-79 Beetle and Super Beetle, 1975-83 Type 2, 0332514120 replaces that black box which is either not turning the fuel pump on, or which fails to turn it off when you turn the key off (running your battery down!). more info
Fuel Pump, Stock Fuel Injection, NEW *BOSCH*, 1975-80 VW Beetle and Super Beetle, and 1975-92 VW Bus and Vanagon, and 1975-76 Porsche 914, BOSCH (OEM)
Fuel Pump, Stock Fuel Injection, NEW *BOSCH*, 1975-80 VW Beetle and Super Beetle, and 1975-92 VW Bus and Vanagon, and 1975-76 Porsche 914, BOSCH (OEM)
Price: $149.95

Fuel Pump, Stock Fuel Injection, NEW *BOSCH*, 1975-80 VW Beetle and Super Beetle, and 1975-92 VW Bus and Vanagon, and 1975-76 Porsche 914, 251-906-091 / BOSCH (OEM) can be difficult to find and are only sporadically available. It's very important on Fuel Injected vehicles to never run out of fuel, because the gasoline is the coolant for the fuel pump! If you run out, the pump overheats and will die quickly! more info
Auxiliary Air Valve, 1975-79 Type 1 and 1976-83 Type 2, 0-280-140-101
Auxiliary Air Valve, 1975-79 Type 1 and 1976-83 Type 2, 0-280-140-101
Price: $159.95

Auxiliary Air Valve, 1975-79 Type 1 and 1976-83 Type 2, 0-280-140-101 is the item that increases air flow when the engine is cold, for a faster idle and faster warm up. When these go bad they stick closed when cold (engine stalls or idles very slow), or open when hot (racing idle when hot). more info
Innovate LC-2 Wideband 4.9 O2 Oxygen Sensor Kit (Wide Band Tuning Kit), 3877
Innovate LC-2 Wideband 4.9 O2 Oxygen Sensor Kit (Wide Band Tuning Kit), 3877
Price: $199.95

Innovate LC-2 Wideband 4.9 O2 Oxygen Sensor Kit (Wide Band Tuning Kit), 3877 interface between your computer or gauge. Whether you are desiring maximum HP, or MPG, you need to know your fuel mixture EXACTLY to achieve your goal. This device lets you do it!
 more info
Innovate MTX-L PLUS Wideband 4.9 O2 Oxygen Sensor Kit, 3918
Innovate MTX-L PLUS Wideband 4.9 O2 Oxygen Sensor Kit, 3918
Price: $219.95

Innovate MTX-L PLUS Wideband 4.9 O2 Oxygen Sensor Kit, 3918 is a "Permanently Mounted" Wideband gauge that fits 2 1/16" Gauge holes (Standard VDO!)

Whether you are desiring maximum HP, or MPG, you need to know your fuel mixture EXACTLY to achieve your goal. This device lets you take the guesswork out!

Complete All-In-One Air/Fuel Ratio Gauge Kit. Includes: Gauge, Silver Bezel, Black Bezel, White Faceplate, Black Faceplate, Bosch Wideband O2 Sensor (LSU4.9), 8 Ft. Sensor Cable (Overall length 10 ft.), Exhaust Bung, Program Cable (Only needed for Datalogging and to change the Fuel Type Setting), and Quick Start Guide/Manual. You will need to download the "Logworks" software from Innovate's website.

 more info
Innovate LM-2 Wideband Oxygen Sensor Kit, Basic, 3837
Innovate LM-2 Wideband Oxygen Sensor Kit, Basic, 3837
Price: $349.95

Innovate LM-2 Wideband Oxygen Sensor Kit, Basic, 3837 is a "MUST HAVE" for serious tuners. Whether you are desiring maximum HP, or MPG, you need to know your fuel mixture EXACTLY to achieve your goal. This device lets you take the guesswork out!

Innovate LM-2 Wideband Oxygen Sensor Kit, Basic, 3837 is the new LM-2 "Basic" Kit (Single Wideband O2) ONLY which includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide.

 more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.