|
|
|
|
|
Vintage Speed Engine Lid Hinge Cover Plates for Beetle and Super Beetle, 155-691-10688
|
|
Vintage Speed Deck Lid Hinge Covers, 155-691-10688 cover up the bolt holes, which become elongated (allowing the bolt heads to pull through). These simply sit in the channel, and give a fresh narrow slot for the new bolts. Look great, work great!
|
|
|
|
|
|
|
|
Vintage Speed Engine Lid Extension (Deck Lid Stand Off), 1965-67 Beetle, 155-691-11788
|
|
Vintage Speed Engine Lid Extension (Deck Lid Stand Off), 1965-67 Beetle, 155-691-11788 holds the bottom of the decklid latched about 3" OPEN, secure but allowing cool air into your hot engine compartment! This will improve airflow & cooling to the engine.
|
|
|
|
|
|
|
|
Vintage Speed Engine Lid Extension (Deck Lid Stand Off), Non-Locking, 1950-64 Beetle, 155-691-10888
|
|
Vintage Speed Engine Lid Extension (Deck Lid Stand Off), Non-Locking, 1950-64 Beetle, 155-691-10888 holds the bottom of the decklid about 3" OPEN, allowing cool air into your hot engine compartment! This will improve airflow & cooling to the engine, but is NOT SECURE. This polished Stainless Steel Accessory is beautiful!
|
|
|
|
|
|
|
|
Vintage Speed Engine Lid Extension (Deck Lid Stand Off), 1968 and Newer Beetle and Super Beetle, 155-691-10988
|
|
Vintage Speed Engine Lid Extension (Deck Lid Stand Off), 1968 and Newer Beetle and Super Beetle, 155-691-10988 holds the bottom of the decklid latched about 3" OPEN, secure but allowing cool air into your hot engine compartment! This will improve airflow & cooling. This Latch Extension features an adjustable angle capability in case the rear apron is tweaked. This permits a secure closure of the deck lid. It also has an insulated catch (for noise reduction) and protective pad at the base to protect your paint.
|
|
|
|
|
|
|
|
EMPI Deck Lid Stand Off, 1958-1963 Beetle, 17-2948-0
|
|
For years these were home made, and they always worked well, but usually didn't turn out too pretty! This product clamps to the rear apron, and holds the bottom of the decklid latched about 3" OPEN, secure but allowing cool air into the engine bay.CNC machined aluminum, is designed to prop open the bottom of 1958-1963 decklids. Includes allen screws to fasten to your car. Designed to keep your carb linkage, dual carbs, throttle bodies or air cleaners from contacting your decklid, but it's best purpose is improved airflow & cooling to the engine compartment. This Stand-off will prop open the bottom of your decklid by about 3". This product has "EMPI" machined into the side of it (not visible in product photo).
|
|
|
|
|
|
|
|
Aluminum Dashboard, 1958-64 Beetle
|
|
Made of top quality thick (.050") 6061 aluminum sheet, with a rolled bead around the perimeter for strength and rigidity. This is precision cut for a fantastic fit, secure with rivets, screws, etc.
Cut holes as needed for your gauges, switches, and warning/signal lights.
|
|
|
|
|
|
|
|
Fast Fab Deck Lid Stand Off, 1958-1963 Beetle
|
|
For years these were home made, and they always worked well, but usually didn't turn out too pretty!This product holds the bottom of the decklid latched about 3" OPEN, secure but allowing cool air into your hot engine compartment! CNC machined aluminum, is designed to prop open the bottom of 1958-1963 decklids. Includes allen screws to fasten to your car. Designed to keep your carb linkage, dual carbs, throttle bodies or air cleaners from contacting your decklid, but it's best purpose is improved airflow & cooling to the engine compartment. This Stand-off will prop open the bottom of your decklid by about 3".
|
|
|
|
|
|
|
|
Aluminum Dashboard, 1965 and Newer Beetle, 1971-72 Superbeetle
|
|
Made of top quality thick (.050") 6061 aluminum sheet, with a rolled bead around the perimeter for strength and rigidity. This is precision cut for a fantastic fit, secure with rivets, screws, etc.Cut holes as needed for your gauges, switches, and warning/signal lights.
|
|
|
|
|
|
|
|
Vintage Speed Engine Lid Extension (Deck Lid Stand Off), Locking T-Handle and Latch, 1950-64 Beetle, 155-691-S
|
|
Vintage Speed Engine Lid Extension (Deck Lid Stand Off), Locking T-Handle and Latch, 1950-64 Beetle, 155-691-S holds the bottom of the deck lid about 3" OPEN, allowing cool air into your hot engine compartment! This will improve airflow & cooling to the engine, while retaining the deck lid closed via the stock locking latch. This polished Stainless Steel Accessory is beautiful too!
This version is adjustable to work on stock cars, OR with deck lid stand offs!
|
|
|
|
|
|
|
|
Herrod Helper Rear Spoiler (Street Wing)
|
|
This is an reproduction of the original Herrod Helper (street version) which was made from regular steel in the 70s and 80s, but this version is made out of aluminum (raw finish). All parts are CNC laser cut and bent on a CNC brake, and the wing kit comes with stainless steel hardware.
The installation of this rear wing will help your car's stability over 60mph, and actually improves aerodynamics and MPG slightly.
|
|
|
|
|
|
|
|
Aluminum Rear Door Panels, 1956-64 Beetle Sedan (Does NOT Fit Convertible!), PAIR
|
Price: $99.95 SALE ITEM! use code TOOMANY30
|
|
|
Aluminum Rear Door Panels, 1956-64 Beetle Sedan (Does NOT Fit Convertible!), Pair are made of top quality thick (.050") 6061 aluminum sheet, with a rolled bead around the perimeter for strength and rigidity. These Panels are precision cut for a fantastic fit, secure with rivets, screws, etc.
|
|
|
|
|
|
|
|
Aluminum Rear Door Panels, 1965 and Up Beetle and Superbeetle Sedan (Does NOT Fit Convertible!), PAIR
|
Price: $99.95 SALE ITEM! use code TOOMANY30
|
|
|
Aluminum Rear Door Panels, 1965 and Up Beetle and Superbeetle Sedan (Does NOT Fit Convertible!), Pair are made of top quality thick (.050") 6061 aluminum sheet, with a rolled bead around the perimeter for strength and rigidity. These Panels are precision cut for a fantastic fit, secure with rivets, screws, etc.
|
|
|
|
|
|
|
|
Fast Fab VW Beetle Bolt-On Street Wing Kit (Rear Spoiler), 1550-79189
|
|
Fast Fab VW Beetle Bolt-On Street Wing Kit (Rear Spoiler), 1550-79189 is a completely bolt on part, no cutting, drilling, nor welding necessary! Takes minutes to install! All parts are CNC laser cut and bent on a CNC brake from .063" thick 6061-T6 Aluminum Sheet.
The installation of this rear wing will help your car's stability over 60mph, and actually improves aerodynamics and MPG slightly.
|
|
|
|
|
|
|
|
Aluminum Front Door Panels, 1956-64 Beetle, PAIR
|
Price: $119.95 SALE ITEM! use code TOOMANY30
|
|
|
Made of top quality thick (.050") 6061 aluminum sheet, with a rolled bead around the perimeter for strength and rigidity. These Panels are precision cut for a fantastic fit, secure with rivets, screws, etc.
|
|
|
|
|
|
|
|
Aluminum Front Door Panels, 1965 and Up Beetle and Superbeetle Sedan (Does NOT Fit Convertible!), PAIR
|
Price: $139.95 SALE ITEM! use code TOOMANY30
|
|
|
Aluminum Front Door Panels, 1965 and Up Beetle and Superbeetle Sedan (Does NOT Fit Convertible!), Pair are made of top quality thick (.050") 6061 aluminum sheet, with a rolled bead around the perimeter for strength and rigidity. These Panels are precision cut for a fantastic fit, secure with rivets, screws, etc.
|
|
|
|
|
|
|
|
Ron Lummus Racing (RLR) VW Beetle Bolt-On Street Wing Kit (Rear Spoiler)
|
|
Ron Lummus Racing (RLR) VW Beetle Bolt-On Street Wing Kit (Rear Spoiler) is the Big Brother to the Legendary Herrod Helper Rear Spoiler. All parts are CNC laser cut and bent on a CNC brake from .063" thick 5052 H32 Aluminum Sheet (raw).
The installation of this rear wing will help your car's stability over 60mph, and actually improves aerodynamics and MPG slightly. This wing is straight across the back, and curved to match the body in the front.
|
|
|
|
|
|
|
|
Ron Lummus Racing (RLR) VW BEETLE Drag Wing Kit (Rear Spoiler; Re-designed in 2016)
|
|
Ron Lummus Racing (RLR) VW Beetle Drag Wing Kit (Rear Spoiler) is the standard by which all rear wings are measured! All parts are CNC laser cut and bent on a CNC brake from 16ga 5052 H32 Aluminum Sheet. Re-designed in 2016 for the speeds today's cars can reach, which is extraordinary! The kit comes complete with Dzus buttons, tabs, springs and rivets. It fits all 1958 and later VW Beetles (sorry, no Oval Windows!) This is shipped in components, and YOU assemble it. It is complete (it even includes the rivets, but you will need to your own rivet gun). It cannot be shipped pre-assembled (it is an oversize package even broken down), and unassembled it is also much less likely to get damaged en route. This item can only be shipped within the continental USA via UPS Ground.
|
|
|
|
|
|
|
|
Ron Lummus Racing (RLR) VW GHIA Drag Wing Kit (Rear Spoiler; Re-designed in 2016)
|
|
Ron Lummus Racing (RLR) Rear VW GHIA Drag Wing Kit (Rear Spoiler) is the standard by which all rear wings are measured! All parts are CNC laser cut and bent on a CNC brake from 16ga 5052 H32 Aluminum Sheet. Re-designed in 2016 for the speeds today's cars can reach. The kit comes complete with Dzus buttons, tabs, springs and rivets. This is shipped in components, and YOU assemble it. It is complete (it even includes the rivets, but you will need to your own rivet gun). It cannot be shipped pre-assembled (it is an oversize package even broken down), and unassembled it is also much less likely to get damaged en route. This item can only be shipped within the continental USA via UPS Ground.
|
|
|