OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > VDO Gauges & Sensors >

"T" Adapter for VDO Sending Unit, 1/8 - 27, per EACH, V240850
VDO Sending Unit "T" Adapter, 1/8 - 27, V240850


 
"T" Adapter for VDO Sending Unit, 1/8 - 27, V240850 is used when you want to use 2 sending units in the same place. Typically this is when you want to use a 1-Pole VDO Oil Pressure Gauge along WITH the stock idiot light sending unit, since the VDO 2-pole senders have idiot light pressure too high. The VDO idiot light sender goes on at 8-10psi, the stock VW sender is set to trigger at 2.5-3psi. Low pressure like this is NORMAL for the VW at hot idle.

We do NOT recommend using these T adapters for use with Oil Temperature Sending Units, since the sending unit location for an oil temperature gauge should be chosen so that it has a good FLOW of oil past it for accurate readings. Dead-heading a temperature sensor will always give readings that are way too low.

Price: $14.95


: V240850


QTY:
Overview
 
"T" Adapter for VDO Sending Unit, 1/8 - 27, V240850 is used when you want to use 2 sending units in the same place. Typically this is when you want to use a 1-Pole VDO Oil Pressure Gauge along WITH the stock idiot light sending unit, since the VDO 2-pole senders have idiot light pressure too high. The VDO idiot light sender goes on at 8-10psi, the stock VW sender is set to trigger at 2.5-3psi. Low pressure like this is NORMAL for the VW at hot idle.

Related Items...
VDO 80psi Oil Pressure Sending Unit, 1/8 -27 NPTF, Single Pole
Price: $49.95
VDO 80psi Oil Pressure Sending Unit, 1/8 -27 NPTF, Single Pole
Oil Pressure Sending Unit (Idiot Light Switch), Stock, All Aircooled Models, 021-919-081B
Price: $12.95
Oil Pressure Sending Unit (Idiot Light Switch), Stock, All Aircooled Models, 021-919-081B

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!