OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Carbs & Fuel System > Solex and Kadron Carburetor Kits
24 products found
Sort By:
1
Kadron Carb Base Gaskets, Pair
Kadron Carb Base Gaskets, PAIR
Price: $3.00

Kadron Carb Base Gaskets, Pair is a pair of high quality carburetor base gaskets that will not go hard or disintegrate prematurely! ACN Tip: give the gaskets a quick rub with some Chap Stick, the wax coating will prevent sticking and tearing so you can use them more than once!

Pair of gaskets will do the base of 2 carburetors, typical for dual Kadrons.

 more info
Weber 34 ICT and Solex 34 PICT DELUXE Carburetor Base Gasket, 34mm ID, PAIR
Weber 34 ICT and Solex 34 PICT DELUXE Carburetor Base Gasket, 34mm ID, PAIR
Price: $4.00

Weber 34 ICT and Solex 34 PICT DELUXE Carburetor Base Gasket, 34mm ID, PAIR which will not go hard or disintegrate prematurely!

These are the smaller size for use on 34mm carburetors.


This pair of gaskets will do one carburetor twice, or a pair of dual 1bbls once.

 more info
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads)
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads)
Price: $5.95

O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to plug the threaded bung up when you don't have the O2 sensor installed for whatever reason (IE: You are finished tuning). You can save wear/tear on the O2 sensor by saving it! more info
O2 Sensor BUNG (only), Stainless Steel
Stainless Steel O2 BUNG (only)
Price: $8.95

more info
34mm PDSIT Solex Venturi, 28mm, EACH
34mm PDSIT Solex Venturi, 28mm, EACH **for CB Dual Solex Carburetors ONLY**
Price: $9.95

34mm PDSIT Solex Venturi, 28mm, EACH are pretty much required if you have dual 34 PDSIT carburetors, the stock venturis are puny and sized for 1200 and 1300cc engines. If you have a larger engine the carburetors will not work properly without these! Two of these venturis (one in each carburetor) will allow the carburetors to provide enough air for your engine to properly breathe. If you are buying these venturis for a set of CB PDSITs that you already own, you'll also need to get a pair of 145 main jets to complete the carburetor upgrade! more info
Solex 34 and 35 PDSIT Carb Base Gaskets, EACH
Solex 34 and 35 PDSIT Carb Base Gaskets, PAIR
Price: $9.95

Solex 34 and 35 PDSIT Carb Base Gaskets, EACH is a pair of high quality carburetor base gaskets that will not go hard or disintegrate prematurely! ACN Tip: give the gaskets a quick rub with some Chap Stick, the wax coating will prevent sticking and tearing so you can use them more than once!

Pair of gaskets will do the base of 2 carburetors, typical for dual Kadrons.

 more info
5mm Fuel Hose, 5.0 X 2.5mm
5mm Fuel Hose, 5.0 X 2.5mm, per meter
Price: $10.00

5mm Fuel Hose, 5.0 X 2.5mm is the best carbureted fuel hose in our opinion. This is braided for abrasion resistance, and has a cloth braid covering, that is easy to grip to put the hose on and off. The covering also looks "new" far longer.

5mm hose is the proper size for stock carburetors. Hose clamps are not even needed, because the cloth woven on the hose surface acts like a "Chinese finger trap", and keeps the hose tight on the fitting. Some owners choose to err on the side of caution and use clamps also.

Price is for a meter of hose.

 more info
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads)
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads)
Price: $14.95

O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning. more info
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads)
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads)
Price: $16.95

O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning. Stainless Steel for SS exhausts! more info
The Complete Kadron Manual, by Frank Camper, 66pgs, Paperback
The Complete Kadron Manual, by Frank Camper, 66pgs, Paperback
Price: $19.95

The Complete Kadron Manual, by Frank Camper, 66pgs, Paperback, "How to Tune, Race, Troubleshoot, and Rebuild" is a sorely needed manual for the popular Kadron 40/44 carburetor. The author went to great lengths to cover common adjustments and repairs, as well as the more "unknown" ones. Must have if you have single or dual Kadron carburetors! This books covers simple jobs like how to tune them, and more advanced topics like troubleshooting and rebuilding the Solex/Brosol/Kadron 40/44 EIS carburetor. The carb is known by many names, "Solexes", "Kads", "K-dogs", "Kay-Drones", "Kadruns", etc etc. Regardless of how you pronounce it, this book is a must have! more info
30 and 31 to 34 PICT Carburetor Adapter Kit
30 and 31 to 34 PICT Carburetor Adapter Kit
Price: $21.95

30 and 31 to 34 PICT Carburetor Adapter Kit is used to put a 30 or 30/31 carburetor on a Dual Port (34 PICT) intake manifold. Normally the flanges will not match up, so this kit allows you to use the 30/31, which some feel is more reliable than the 34-3. more info
35mm Solex PDSIT Venturi and Discharge Nozzle, 27mm (Stock Size), EACH
35mm Solex PDSIT Venturi and Discharge Nozzle, 27mm (Stock Size), EACH
Price: $24.95

35mm Solex PDSIT Venturi and Discharge Nozzle, 27mm (Stock Size), EACH replace the venturi you broke or burned up with that carb fire. These generally work best with a 140 main jet at sea level. These venturis have the shelf which supports the discharge nozzle for the main circuit. more info
35mm PDSIT Solex Venturi, 30mm, EACH, 30353001
35mm PDSIT Solex Venturi, 30mm, EACH, 30353001
Price: $27.95

35mm PDSIT Solex Venturi, 30mm, EACH, 30353001 are a nice power upgrade for the 35 PDSIT Solex carbs, which come out of the box with a 27mm venturi. The 30mm venturi will offer more flow potential (more power), and works best with a 160 main jet. Two of these venturis (one in each carburetor) will allow the carburetors to provide enough air for your engine to properly breathe. Don't forget to get a pair of 160 main jets to complete the carburetor upgrade! Also, if you order these at the same time as ordering the carburetors, and choose the "Carburetor Setup" option, we will install and jet them while we do the carb work! more info
30mm Venturis for Solex/Kadron 40/44, PAIR, 43-4408-0
30mm Venturis for Solex/Kadron 40/44, PAIR, 43-4408-0
Price: $49.95

30mm Venturis for Solex/Kadron 40/44, PAIR, 43-4408-0 are a nice upgrade to the stock venturis on Kadron Carburetors, especially if you have more than stock displacement. Don't forget to get a pair of 135 main jets to complete the carburetor upgrade, which work well at most sea level elevations. more info
40/44 Solex Venturi (Kadron Venturi), 32mm, PAIR, 43-4409-0
40/44 Solex Venturi (Kadron Venturi), 32mm, PAIR, 43-4409-0
Price: $49.95

40/44 Solex Venturi (Kadron Venturi), 32mm, PAIR, 43-4409-0 are a nice upgrade to the stock venturis on Kadron Carburetors, especially if you have more than stock displacement. Don't forget to get a pair of 145 main jets to complete the carburetor upgrade, which work well at most sea level elevations. more info
Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, PRIOR TO 2/15/15, for use with 4.2 O2 Sensor, 3828
Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, PRIOR TO 2/15/15, for use with 4.2 O2 Sensor, 3828
Price: $84.95

Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, PRIOR TO 2/15/15, for use with 4.2 O2 Sensor, 3828 is for people that have the Innovate LC-2, MTX-L Gauge or Innovate LM-2, with the 4.2 O2 Sensor, but have a rear engined car! The harness that comes with the gauge is too short, so we had this one made! It's 18' long and will allow you to use your new Wideband toy!. This will allow you to use the LM-2 and MTX-L systems in all Rear and Mid-Engined VW and Porsche cars. Vanagons, Busses, 911s, Beetles, Ghias, etc. This does NOT fit the 4.9 O2 Sensors! more info
Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, AFTER 2/15/15, for use with 4.9 O2 Sensor, 3889
Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, AFTER 2/15/15, for use with 4.9 O2 Sensor, 3889
Price: $89.95

Innovate Wiring Harness Extension, 18', Fits LC-2, LM-2 and MTX-L, AFTER 2/15/15, for use with 4.9 O2 Sensor, 3889 is for people that have the Innovate LC-2, MTX-L Gauge or Innovate LM-2, but have a rear engined car! The harness that comes with the gauge is too short, so we had this one made! It's 18' long and will allow you to use your new Wideband toy!. This will allow you to use the LM-2 and MTX-L systems in all Rear and Mid-Engined VW and Porsche cars. Vanagons, Busses, 911s, Beetles, Ghias, etc.

This does NOT fit the 4.2 O2 Sensors! more info
34 PICT 3 (34-3) Stock Carburetor, 12V, Economy, 113-129-031K EC
34 PICT 3 (34-3) Stock Carburetor, 12V, Economy, 113-129-031K EC
Price: $164.95

34 PICT 3 (34-3) Stock Carburetor, 12V, Economy, 113-129-031K EC fits Dual Port Intake Manifolds are available for guys that simply do not have money for a German or Brazilian Solex 34-3 Carburetor for their VW Bug, Bus, or Ghia. In most every case where the "carb is bad", there is something else wrong (usually ignition) that has been overlooked. These are setup for 12V electrics, and include the idle shut off valve. These fit both alternator and generator equipped upright engines.

THERE ARE NO RETURNS ACCEPTED FOR THIS CARBURETOR! If you want a "Returnable" unit, buy the non-"Economy" version of this, which has a warranty. more info
30 PICT-1 Stock-Style Carburetor, Electric, Single Port, Economy, 113-129-029-113-129-023R
30 PICT-1 Stock-Style Carburetor, Electric, Single Port, Economy, 113-129-029-113-129-023R
Price: $199.95

30 PICT-1 Stock-style Carburetor, Electric, Single Port, Economy, 113-129-029-113-129-023R is a good carb for single port engines that want to run an electric choke. This model of carburetor gives good performance and reliability.

THERE ARE NO RETURNS ACCEPTED FOR THIS CARBURETOR! If you want a "Returnable" unit, buy the non-"Economy" version of this, which has a warranty. more info
Innovate LC-2 Wideband 4.9 O2 Oxygen Sensor Kit (Wide Band Tuning Kit), 3877
Innovate LC-2 Wideband 4.9 O2 Oxygen Sensor Kit (Wide Band Tuning Kit), 3877
Price: $199.95

Innovate LC-2 Wideband 4.9 O2 Oxygen Sensor Kit (Wide Band Tuning Kit), 3877 interface between your computer or gauge. Whether you are desiring maximum HP, or MPG, you need to know your fuel mixture EXACTLY to achieve your goal. This device lets you do it!
 more info
Innovate MTX-L PLUS Wideband 4.9 O2 Oxygen Sensor Kit, 3918
Innovate MTX-L PLUS Wideband 4.9 O2 Oxygen Sensor Kit, 3918
Price: $219.95

Innovate MTX-L PLUS Wideband 4.9 O2 Oxygen Sensor Kit, 3918 is a "Permanently Mounted" Wideband gauge that fits 2 1/16" Gauge holes (Standard VDO!)

Whether you are desiring maximum HP, or MPG, you need to know your fuel mixture EXACTLY to achieve your goal. This device lets you take the guesswork out!

Complete All-In-One Air/Fuel Ratio Gauge Kit. Includes: Gauge, Silver Bezel, Black Bezel, White Faceplate, Black Faceplate, Bosch Wideband O2 Sensor (LSU4.9), 8 Ft. Sensor Cable (Overall length 10 ft.), Exhaust Bung, Program Cable (Only needed for Datalogging and to change the Fuel Type Setting), and Quick Start Guide/Manual. You will need to download the "Logworks" software from Innovate's website.

 more info
30 PICT-1 Stock Carburetor, Manual Choke, Single Port, Brosol, 113-129-027BR
30 PICT-1 Stock Carburetor, Manual Choke, Single Port, Brosol, 113-129-027BR
Price: $229.95

30 PICT-1 Stock Carburetor, Manual Choke, Single Port, Brosol, 113-129-027BR BR fits both Single Port intakes, dual port IF you have an adapter. This carburetor is class legal for limited class bugs and buggy racing.

Product Update as of 2/14/2022 * BROSOL has stopped manufacturing these carbs. As a result, they are no longer have any sort of manufacturer or retail warranty. The available inventory are NEW from factory, but since they are no longer supported/sold by BROSOL they are being sold AS-IS / FINAL-SALE, with NO WARRANTY. more info
30/31 PICT-3 Stock Carburetor, 12V, Single and Dual Port, Bocar, 113-129-029H BR
30/31 PICT-3 Stock Carburetor, 12V, Single and Dual Port, BROSOL, 113-129-029H BR
Price: $249.95

30/31 PICT-3 Stock Carburetor, 12V, Single and Dual Port, BROSOL, 113-129-029H BR Fits both Single Port and Dual Port Intake Manifolds, and we've had excellent results from these quality carburetors (unlike the Chinese copycats!!!). You may have to troubleshoot these a little on install, but in most every case where the "carb is bad", there is something else wrong (usually ignition) that has been overlooked. These are setup for 12V electrics, and include the idle shut off valve. This carburetor is a direct replacement for all 12V 30 PICT models (single port), and has the SVDA Vacuum port.

Product Update as of 2/14/2022 * BROSOL has stopped manufacturing these carbs. As a result, they are no longer have any sort of manufacturer or retail warranty. The available inventory are NEW from factory, but since they are no longer supported/sold by BROSOL they are being sold AS-IS / FINAL-SALE, with NO WARRANTY. more info
Innovate LM-2 Wideband Oxygen Sensor Kit, Basic, 3837
Innovate LM-2 Wideband Oxygen Sensor Kit, Basic, 3837
Price: $349.95

Innovate LM-2 Wideband Oxygen Sensor Kit, Basic, 3837 is a "MUST HAVE" for serious tuners. Whether you are desiring maximum HP, or MPG, you need to know your fuel mixture EXACTLY to achieve your goal. This device lets you take the guesswork out!

Innovate LM-2 Wideband Oxygen Sensor Kit, Basic, 3837 is the new LM-2 "Basic" Kit (Single Wideband O2) ONLY which includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide.

 more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.