OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

CB Performance 044 Ultra Mag Plus CNC Cylinder Heads, 42/44X37.5mm Valves, 92 and 94mm Bore, PAIR
CB Performance 044 Ultra Mag Plus CNC Cylinder Heads, 42/44X37.5mm Valves, 92 and 94mm Bore, PAIR
Photos courtesy CB Peformance


 
CB Performance 044 Ultra Mag Plus CNC Cylinder Heads, 42/44X37.5mm Valves, 92 and 94mm Bore, PAIR are designed for 2000cc and larger engines, and are based on the same high quality 044 Castings as other 044s! CNC porting is perfect from head to head! These heads are capable of 190+ HP in the right engines! These heads are based on the same high quality 044 Castings as other 044s! CNC porting is perfect from head to head! These heads focus on air speed in the ports instead of pure flow bench #s! Higher air speed means more power!

This is a fantastic head for larger engine that aren't "full race". Compared to our ACN "L Series" of head, this head is around an L6. So it's a great choice for guys where the L5 is not quite enough. This head is good for around 170-180hp, but engines have reported 190+ when pushed.

The combustion chamber is 62cc if they are not fly cut for more compression. So be sure to do the math on what CCs you need to get the compression to match your cam and application, you don't want to wind up with 6.5:1 compression and a huge cam, the engine will be a pig!

We strongly recommend that you have an exhaust in the 1 3/4" primary size to utilize the flow capability of these heads! Failure to heed this advice can result in difficult (IMPOSSIBLE) tuning issues, and likely cylinder head overheating. It also won't make the power you want!

With these heads we recommend valve lifts in the .500-.550" range, which is where they will perform at their best. You don't have to worry about coil bind, they will lift over .900" at the valve! These heads have 168lbs of spring pressure on the seat, 1.500" installed height of valve spring, and 324lbs of spring pressure at .520" lift.

Price: $1,069.95


Availability: Special Order / Custom-Made-To-Order Item - time varies
: CB044ULTRAMAGPLUS-CNCHEADS

Choose Retainer Type

Chromoly or Titanium Retainers:

Specify your Head Combustion Chamber Size

Specify CC:
[adds $70.00] optional
Choose Valve and Bore Size


Custom Made Item Agreement

I AGREE TO THE MADE TO ORDER TERMS THAT APPLY TO THIS ITEM
MADE TO ORDER TERMS and CONDITIONS: This item is made-to-order and cannot be canceled once manufacture has been initiated (which is typically within 24 hours of order submission). Orders for this item are non-cancellable, non-returnable, and non-refundable. Item IS covered by warranty against verifiable defect for 90 days from date of shipment. Please double check your selection and/or specification to be certain you are ordering what you need!



QTY:
Overview
 
CB Performance 044 Ultra Mag Plus CNC Cylinder Heads, 92 and 94mm Bore, PAIR are designed for 2000cc and larger engines, and are based on the same high quality 044 Castings as other 044s! CNC porting is perfect from head to head! These heads are capable of 190+ HP in the right engines!
Item Features
Intake flow a @25 inches of water
Lift-CFM

.100-53
.200-103
.300-137
.400 -160
.500-177
.600-190


Related Items...
NGK DCPR6E Spark Plug, 12 x 3/4" Reach Threads, Projected Tip, 11/16" Socket, EACH
Price: $4.95
NGK DCPR6E Spark Plug, 12 x 3/4" Reach Threads, Projected Tip, 11/16" Socket, Each
CB Performance Dual IDF Weber Carburetor Kits, Choose from Type 1, Type 3, and Type 4 Engines
Price: $1,159.95
CB Performance Dual IDF Weber Carburetor Kits, Type 1, Type 3, and Type 4 Engines
NGK D6EA Spark Plug, 12 x 3/4" Reach Threads, Conventional Tip, 11/16" Socket
Price: $4.95
NGK D6EA Spark Plug, 12 x 3/4" Reach Threads, Conventional Tip, 11/16" Socket
DPR Chrome Vanadium 12V 200mm Lightened Flywheel
Price: $199.95
DPR Chrome Vanadium 12V 200mm Lightened Flywheel

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!