OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

SCAT C25 Type 4 Camshaft, for Stock 1.3:1 Rockers, 20086
SCAT C25 Type 4 Camshaft, Stock 1.3:1 Rockers, 20086
 
SCAT C25 Type 4 Camshaft, Stock 1.3:1 Rockers, 20086 is designed for Type 4 engines, and it's specs are .430" Valve Lift with stock 1.3:1 Rockers, 272 degrees of advertised duration, and 234 degrees of duration at .050", on a 108 Lobe Center.

SCAT camshafts have been around seemingly FOREVER, but there is a reason for that (their grinds work well!). While not as State Of The Art as a Web-Cam, these are great for the enthusiast that has to watch his pennies, especially if you don't need a super specific grind, you just need a "little more" than stock!

This cam is similar to the Engle W100 grind, it will work great even with the stock carburetors or FI, but it also shines with dual 1bbl carbs, or a single 2bbl. This is a nice upgrade on stockish engines, it's an outstanding bus cam! HD Springs are required! This cam works best with Compression from 7.5-8:1. Power band is from off-idle to 4000.

This cam is NOT clearanced for Stroker Crankshafts, for that you need a special Web-Cam.

Price: $129.95


: 20086


QTY:
Overview
 
SCAT C25 Type 4 Camshaft, Stock 1.3:1 Rockers, 20086 is designed for Type 4 engines, and it's specs are .430" Valve Lift with stock 1.3:1 Rockers, 272 degrees of advertised duration, and 234 degrees of duration at .050", on a 108 Lobe Center.

Related Items...
Standard Thrust Cam Bearings, Type 4 Based Engines, 021-198-541
Price: $29.95
Standard Thrust Cam Bearings, Type 4 Based Engines, 021-198-541BR
ACN Heavy Duty Aluminum Pushrods (Assembled), for Type 4 Engines with Solid Lifters, Set of 8 (assembled)
Price: $149.95
ACN Heavy Duty Aluminum Pushrods, Type 4 Engines with Solid Lifters, Set of 8 (assembled)
MELLING 30mm Cast Iron Oil Pump, Type 4 Engines
Price: $99.95
MELLING 30mm Cast Iron Oil Pump, Type 4 Engines
Bolt On Cam Gear, Type 4, TYPE-4-BOLT-ON-CAM-GEAR
Price: $69.95
Bolt On Cam Gear, Type 4, TYPE-4-BOLT-ON-CAM-GEAR
SCAT Solid Lifters (with Oil Hole), Type 4 Engines, Set of 8, 20091
Price: $79.95
SCAT Solid Lifters, Type 4 Engines, Set of 8, 20091

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!