OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

SCAT 36hp Non-Doghouse Fan Shroud, Paintable or Chrome, Heat or No Heater Outlets, 25092
SCAT 36hp Non-Doghouse Fan Shroud, Paintable or Chrome, Heat or No Heater Outlets, 25092
Chrome Shroud shown in product photo.
 
SCAT 36hp Non-Doghouse Fan Shroud, Paintable or Chrome, Heat or No Heater Outlets, 25092 gives you a lot more room in the engine compartment, especially if you have dual carbs! SCAT Fan Shrouds are known as the thickest and highest quality aftermarket shrouds available, second only to OEM German Shrouds. You can use either Regular Width OR Doghouse Fans with these shrouds for more cooling, though the doghouse cools much better. Doghouse fans are 10% wider for better cooling!

These are made from THICK metal, not the cheesy thin stuff! Internal ducting routes air where it needs to go, at the proper velocity, it's not like the "Budget" shrouds that have no duct work and have serious airflow issues! If you choose the non-chrome one, it's Cadmium Plated, and ready for your finishing. A clean, sand, and paint are all that's needed.

These shrouds are NOT set up to accept the stock Flap Assembly, but with a little work you can modify it to accept the stock flaps, for optimal cooling and cold weather performance. We always recommend a thermostat and flaps to be operational, even on "High Performance" engines.

Also, only the doghouse version of these shrouds have the throttle tube hole already present. The non-doghouse shrouds have the FLYWHEEL side hole there, but the rear hole must be drilled by the end user. This was done to accommodate the different throttle tube location of some carburetor kits.

We also carry these shrouds in full cooling tin kits, both Cad Plated and POWDER COATED, if you are looking for more than just the shroud!

If you get the CHROME option, YOU MUST KEEP YOUR SHROUD WAXED!!!

Price: $59.95


: SCAT-NON-DOGHOUSE-FAN-SHROUD

Heater Outlets


Choose Finish



QTY:
Overview
 
SCAT 36hp Non-Doghouse Fan Shroud, Paintable or Chrome, Heat or No Heater Outlets, 25092 gives you a lot more room in the engine compartment, especially if you have dual carbs! SCAT Fan Shrouds are known as the thickest and highest quality aftermarket shrouds available, second only to OEM German Shrouds. You can use either Regular Width OR Doghouse Fans with these shrouds for more cooling, though the doghouse cools much better. Doghouse fans are 10% wider for better cooling!

Related Items...
Oil Cooler, Doghouse, OEM VW, 1971+ Upright Engines, 113-117-021OE
Price: $109.95
Oil Cooler, Doghouse, OEM VW, 1971+ Upright Engines, 113-117-021
Doghouse Cooling Fan, OEM VW, 1971+ Upright Engines, 113-119-031BOEM
Price: $79.95
Doghouse Cooling Fan, OEM VW, 1971+ Upright Engines, 113-119-031B
Doghouse Cooling Fan, MEXICAN, 1971+ Upright Engines, 113-119-031B
Price: $34.95
Doghouse Cooling Fan, Mexican, 1971+ Upright Engines, 113-119-031B
SCAT Dual Port Cylinder Tin (Shrouds), Chrome Plates, PAIR, 25093C
Price: $39.95
SCAT Dual Port Cylinder Tin (Shrouds), Chrome Plates, Pair, 25093C
Alternator/Generator Backing Plate Tin, Black, 3 Pieces, 113-119-031KIT
Price: $19.95
Alternator/Generator Backing Plate Tin, Black, 3 Pieces, 113-119-031KIT
Oil Cooler, Doghouse, 1971+ Type 1 Upright Engines, 113-117-021
Price: $69.95
Oil Cooler, Doghouse, 1971+ Upright Engines, 113-117-021
Alternator/Generator Backing Plate Tin, OEM VW, Black, 3 Pieces, 043-193-261
Price: $44.95
Alternator/Generator Backing Plate Tin, OEM VW, Black, 3 Pieces, 043-193-261
Bellhousing Tin (Firewall Tin), for 1300/1500/1600cc Beetle/Ghia/THING With Upright Engine (choose EARLY/LATE, CHROME or TEMP BLACK PAINT)
Price: $39.95
Bellhousing Tin (Firewall Tin), 1300/1500/1600cc Beetle/Ghia/THING With Upright Engine, BLACK OR CHROME

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!