OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Carbs & Fuel System >

Weber 48 IDA Needle and Seat (Inlet Valve), 200 (2.0mm), EACH, 79504.200
Weber 48 IDA Needle and Seat (Inlet Valve), 200 (2.0mm), EACH, 79504.200
 
Weber 48 IDA Needle and Seat (Inlet Valve), 200 (2.0mm), EACH, 79504.200 is the valve that opens and closes the flow of fuel into the carburetor float bowl. If these leak you will run rich as excess fuel overwhelms the emulsion well. Price per each.

The tab on the float rests against this valve and closes the flow of fuel when the fuel level hits a certain point. Fuel level is adjustable in height by gently bending this tab to engage the needle and seat at lower or higher points. The 200 size is great for engines up to 220hp or so.

Note: We do NOT recommend the use of the Glass Needle/Seat, we have found they don't stop the flow of fuel well, and tend to dribble gas even when closed, resulting in rich conditions that cannot be tuned out via jetting! This is NOT a Glass Needle/Seat, it's the good kind!

THIS PART DOES NOT COME WITH A GASKET! THE GASKET MUST BE PURCHASED SEPARATELY!
Price: $24.95


: 79504.200


QTY:
Overview
 
Weber 48 IDA Needle and Seat (Inlet Valve), 200 (2.0mm), EACH, 79504.200 is the valve that opens and closes the flow of fuel into the carburetor float bowl. If these leak you will run rich as excess fuel overwhelms the emulsion well. Price per each.

The tab on the float rests against this valve and closes the flow of fuel when the fuel level hits a certain point. Fuel level is adjustable in height by gently bending this tab to engage the needle and seat at lower or higher points. The 200 size is great for engines up to 220hp or so.

Note: We do NOT recommend the use of the Glass Needle/Seat, we have found they don't stop the flow of fuel well, and tend to dribble gas even when closed, resulting in rich conditions that cannot be tuned out via jetting! This is NOT a Glass Needle/Seat, it's the good kind!

THIS PART DOES NOT COME WITH A GASKET! THE GASKET MUST BE PURCHASED SEPARATELY!

Related Items...
Weber 48 IDA Needle and Seat GASKET, EACH, 41530.032
Price: $1.95
Weber 48 IDA Needle and Seat GASKET, EACH, 41530.032

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!