OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

Panchito 044 Dual Port Cylinder Head (88TW/90.5/92mm or 94mm Bore), 40 X 35mm Valves, per EACH
Panchito 044 Dual Port Cylinder Head (88TW/90.5/92mm or 94mm Bore), 40 X 35mm Valves, per EACH
Images courtesy CB Performance


 
Panchito 044 Dual Port Cylinder Head (88TW/90.5/92mm or 94mm Bore), 40 X 35mm Valves, is a fantastic value for medium to larger engines up to around 160hp. Hi velocity ports provide high air speed for an extremely wide power band. This is a great head for VW bugs, busses and type 3s!

You can't go wrong with these on engines from 1800-2100cc, but they will also work well on medium tuned 1600s! This is a fantastic "ready to run" option for guys building their first "big" engine, being capable of ~160hp with everything else being up to snuff. We do have heads that outperform these, but for the price this is a fantastic choice. For a lot of folks this is the best head option value by far!

Be sure to calculate your needed chamber volume for your desired compression ratio prior to ordering. The chamber volume of this head is 55cc for the standard version. If you need chamber volume above 54cc, you will have to order the CNC version (61cc CNC chamber) PLUS request CC to specified volume (between 55 to 60). Chamber size above 61cc is not available. The CNC chamber flows better, so (for example) if you needed a 51cc chamber to get the CR you want, you are best off getting the 61cc CNC chamber AND flycut the head to 51cc, instead of the lesser flowing 54cc chamber flycut to the same 51cc. The larger CNC chamber flows more air than the standard 54cc chamber does.

These use the 12mm x 3/4" Reach (long) spark plug.

Price is for ONE cylinder head.

See Related Items (below and at right) if you need to also add Intake Matchport service (intakes are sold separately from matchport labor)

Price: $389.95

: PANCHITO-HEAD-LARGEBORE

Choose Bore Size


Choose Valve Springs


Specify Combustion Chamber Size

Combustion Chamber Size:

Custom Made Item Agreement

I AGREE TO THE MADE TO ORDER TERMS THAT APPLY TO THIS ITEM
MADE TO ORDER TERMS and CONDITIONS: This item is made-to-order and cannot be canceled once manufacture has been initiated (which is typically within 24 hours of order submission). Orders for this item are non-cancellable, non-returnable, and non-refundable. Item IS covered by warranty against verifiable defect for 90 days from date of shipment. Please double check your selection and/or specification to be certain you are ordering what you need!



QTY:
Overview More Info
 
Panchito 044 Dual Port Cylinder Head (88TW/90.5/92mm or 94mm Bore), 40 X 35mm Valves, per EACH is a fantastic value for medium to larger engines up to around 160hp. Hi velocity ports provide high air speed for an extremely wide power band. This is a great head for VW bugs, busses and type 3s!

You can't go wrong with these on engines from 1800-2100cc, but they will also work well on medium tuned 1600s! This is a fantastic "ready to run" option for guys building their first "big" engine, being capable of ~160hp with everything else being up to snuff. We do have heads that outperform these, but for the price this is a fantastic choice. For a lot of folks this is the best head option value by far!

These use the 12mm x 3/4" Reach (long) spark plug.

Price is for ONE cylinder head.


Related Items...
NGK D7EA Spark Plug, 12 x 3/4" Reach Threads, Conventional Tip, 11/16" Socket
Price: $4.95
NGK D7EA Spark Plug, 12 x 3/4" Reach Threads, Conventional Tip, 11/16" Socket
CB Dual Weber IDF & Dellorto DRLA Intake Manifold Kit, Offset, Upright Type 1 Engines, Match Ported For Panchitos Heads, PAIR, 3162
Price: $139.95
CB Dual Weber IDF & Dellorto DRLA Intake Manifold Kit, Offset, Upright Type 1 Engines, Match Ported For Panchitos Heads, PAIR, 3162
NGK DCPR6E Spark Plug, 12 x 3/4" Reach Threads, Projected Tip, 11/16" Socket, EACH
Price: $4.95
NGK DCPR6E Spark Plug, 12 x 3/4" Reach Threads, Projected Tip, 11/16" Socket, Each
CB Panchito 044 Dual Port Intake Manifold Gasket, EACH, CB2788
Price: $1.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
CB Panchito 044 Dual Port Intake Manifold Gasket, EACH, CB2788

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!