OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > OVERSTOCK SALE Items! - 30% off with Promocode! >

Lower Cylinder Air Deflector Plate, Upright Engines, 8mm Head Studs, 40hp-1600cc Upright Engines, ECONOMY, EACH, 043-119-317B
Lower Cylinder Air Deflector Plate, Upright Engines, 8mm Head Studs, 40hp-1600cc Upright Engines, ECONOMY, Each, 043-119-317B
 
Lower Cylinder Air Deflector Plate, Upright Engines, 8mm Head Studs, 40hp-1600cc Upright Engines, ECONOMY, Each, 043-119-317B is the most critical pieces of engine tin on the whole engine! These deflect air to the lower parts of the cylinders, to properly cool them. If these are omitted from the engine, the cooling air simply rushes down between the cylinders, and the bottoms of the cylinders run much hotter than the tops. This creates such uneven temperatures that the cylinders can distort, and the rings then no longer seal the cylinder because it is no longer round, it's Egg Shaped!

These must be installed BEFORE the heads and push rod tubes are installed, unless you are using Spring Loaded Push Rod Tubes. We prefer these square shaped tins over the "Super Cool Tins" that many people use. These also MUST be used in conjunction with "Sled Tins" to keep air rushing beneath the engine from "backing up" the cooling air's escape, out and back! You need TWO of these do to one engine. These snap onto the lower inner head studs, and "block" the air that flows between the cylinders, fore/aft to cool the lower side of the cylinder. These are often missing, and this results in a significant temperature difference from cylinder upper and lower, and lessens cylinder lifespan because they distort and warp (non round).
Price: $5.95
SALE ITEM! use code TOOMANY30


: 043-119-317B


QTY:
Overview
 
Lower Cylinder Air Deflector Plate, Upright Engines, 8mm Head Studs, 40hp-1600cc Upright Engines, ECONOMY, Each, 043-119-317B is the most critical pieces of engine tin on the whole engine! These deflect air to the lower parts of the cylinders, to properly cool them. If these are omitted from the engine, the cooling air simply rushes down between the cylinders, and the bottoms of the cylinders run much hotter than the tops. This creates such uneven temperatures that the cylinders can distort, and the rings then no longer seal the cylinder because it is no longer round, it's Egg Shaped!

These must be installed BEFORE the heads and push rod tubes are installed, unless you are using Spring Loaded Push Rod Tubes. We prefer these square shaped tins over the "Super Cool Tins" that many people use. These also MUST be used in conjunction with "Sled Tins" to keep air rushing beneath the engine from "backing up" the cooling air's escape, out and back! You need TWO of these do to one engine. These snap onto the lower inner head studs, and "block" the air that flows between the cylinders, fore/aft to cool the lower side of the cylinder. These are often missing, and this results in a significant temperature difference from cylinder upper and lower, and lessens cylinder lifespan because they distort and warp (non round).

Related Items...
Lower Engine Tin (Sled Tins, Heater Channel Tins), Upright Engines, 3 Piece Set
Price: $44.95
Lower Engine Tin (Sled Tins, Heater Channel Tins), Upright Engines, 3 Piece Set
Rear Deflector Tin (Cooling Tin), Right, 1966+ T1 and 1963-71 T2, 113-119-358A
Price: $11.95
Rear Deflector Tin (Cooling Tin), Right, 1966+ T1 and 1963-71 T2, 113-119-358A
Rear Deflector Tin (Cooling Tin), Left, 1966+ T1 and 1963-71 T2, 113-119-357
Price: $11.95
Rear Deflector Tin (Cooling Tin), Left, 1966+ T1 and 1963-71 T2, 113-119-357

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.