OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

Low Pressure Hose Barb Fitting, 1/2" Hose x 3/8" NPT Male, EACH
Hose Barb, 1/2" Hose x 3/8" NPT Male, EACH
 
This is a single 1/2" Hose Barb which fit holes that are tapped to 3/8" NPT. This is a low pressure compatible barb, best used for breather hoses and vacuum hoses (power brakes). We prefer to use this with the 12mm cloth braided hose. You may need 45 or 90 degree fittings to route the hoses without kinks!

This is the same barb we use when installing a fitting in the intake manifold for the power brake vacuum hose.
Price: $3.95


: BARB-1-2-X-3-8NPT


QTY:
Overview
 
This is a single 1/2" Hose Barb which fit holes that are tapped to 3/8" NPT. This is a low pressure compatible barb, best used for breather hoses and vacuum hoses (power brakes). We prefer to use this with the 12mm cloth braided hose. You may need 45 or 90 degree fittings to route the hoses without kinks!

This is the same barb we use when installing a fitting in the intake manifold for the power brake vacuum hose.

Related Items...
90 Degree BRASS Fitting, 3/8" NPT Male x 3/8" NPT Female, EACH
Price: $7.95
90 Degree Fitting, 3/8" NPT Male x 3/8" NPT Female, Each
12mm Cloth Braided Hose, Used for Oil Breather AND Charcoal Canister (Emissions), 12.0 X 3.3mm - Per Meter, N203741
Price: $16.00
12mm Cloth Braided Hose, Used for Oil Breather AND Charcoal Canister (Emissions), 12.0 X 3.3mm - Per Meter, N203741
45 Degree BRASS Fitting, 3/8" NPT Male x 3/8" NPT Female, EACH
Price: $8.95
45 Degree Fitting, 3/8" NPT Male x 3/8" NPT Female, Each

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!