OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Electrical System >

Stock Generator Pulley, 6 Volt, 1960-66 Beetle, Ghia, and Bus, 042-903-109A
Stock Generator Pulley, 6 Volt, 1960-66 Beetle, Ghia, and Bus, 042-903-109A
 
Stock Generator Pulley, 6 Volt, 1960-66 Beetle, Ghia, and Bus, 042-903-109A is a nice pulley for you guys on the budget! These will either be Cad Plated (Gold), or painted black, we get both styles in. This is a high quality pulley that isn't pricey!

To PROPERLY adjust the belt, you absolutely must start with the belt too loose, and remove 1-2 shims at a time until the correct tension is achieved. If you remove too many, you'll wind up tightening the nut until the belt is "tight enough", but the 2 pulley halfs are not squeezed together, and as the engine rotates the pulleys wear one another out. Every rotation the outer pulley moves out at the top, then in at the bottom, out at the top, until they are ruined. By doing it the 1-2 shim way, when you get the right tension the pulley halfs are tight against the shims and one another, and this movement and wear do not occur.

Price: $19.95


: 042-903-109A


QTY:
Overview
 
Stock Generator Pulley, 6 Volt, 1960-66 Beetle, Ghia, and Bus, 042-903-109A is a nice pulley for you guys on the budget! These will either be Cad Plated (Gold), or painted black, we get both styles in. This is a high quality pulley that isn't pricey!

To PROPERLY adjust the belt, you absolutely must start with the belt too loose, and remove 1-2 shims at a time until the correct tension is achieved. If you remove too many, you'll wind up tightening the nut until the belt is "tight enough", but the 2 pulley halfs are not squeezed together, and as the engine rotates the pulleys wear one another out. Every rotation the outer pulley moves out at the top, then in at the bottom, out at the top, until they are ruined. By doing it the 1-2 shim way, when you get the right tension the pulley halfs are tight against the shims and one another, and this movement and wear do not occur.


Related Items...
Generator & Alternator Pulley Spacer Washer, EACH, 111-903-131A
Price: $0.60
Generator & Alternator Pulley Spacer Washer, Each, 111-903-131A
Upright Engine Pulley Alignment Kit
Price: $17.95
Upright Engine Pulley Alignment Kit

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!