OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Carbs & Fuel System >

Fuel Pressure Regulator, Basic, Carbureted Engines, 1.5-5psi
Fuel Pressure Regulator, Basic, Carbureted Engines, 1.5-5psi
 

Fuel Pressure Regulator, Basic, Carbureted Engines, 1.5-5psi is a low pressure fuel pressure regulator that works with most fuels except methanol. Fuel pressure is pre-set to 3.5psi, but it can be set to any fuel pressure between 1.5psi and 5psi. THIS ONE ACTUALLY WORKS, unlike the Purolator, Mr. Gasket, and EMPI Units!

This regulator comes with a mounting bracket and hardware, but does NOT have fuel line barbs, which much be purchased separately depending on the size of fuel hose you are using. This regulator is threaded to 1/8" NPT on both inlet and outlet, and does NOT come with fittings! Buy the fittings you need to match the sizes of your fuel hoses.

Note that proper fuel pressure is critical for proper carburetor operation. Holley regulators are "OK" but don't go below 3psi, and stock carburetors (Solex, Bocar, Brosol, and Kadron) all run best with 1.5-2psi fuel pressure. Weber IDF, IDA, ICT, DFEV/DFAV, and DCNFs work best with 3-3.5psi, so this regulator works for all of them, even if you switch carburetors sometime in the future!

This is an EXCELLENT regulator to use with the stock fuel pump. Normal methods of dropping fuel pressure with the stock fuel pump are to stack gaskets between the pump and pump spacer, and this does work but it also reduces fuel volume. Using this regulator will keep full volume but wlll drop pressure, which is more desirable.
Price: $74.95
Country of Manufacture or Origin: MADE IN ITALY


: BASIC-FUEL-PRESSURE-REGULATOR


QTY:
Overview
 

Fuel Pressure Regulator, Basic, Carbureted Engines, 1.5-5psi is a low pressure fuel pressure regulator that works with most fuels except methanol. Fuel pressure is pre-set to 3.5psi, but it can be set to any fuel pressure between 1.5psi and 5psi. THIS ONE ACTUALLY WORKS, unlike the Purolator, Mr. Gasket, and EMPI Units!

This regulator comes with a mounting bracket and hardware, but does NOT have fuel line barbs, which much be purchased separately depending on the size of fuel hose you are using. This regulator is threaded to 1/8" NPT on both inlet and outlet, and does NOT come with fittings! Buy the fittings you need to match the sizes of your fuel hoses.

Note that proper fuel pressure is critical for proper carburetor operation. Holley regulators are "OK" but don't go below 3psi, and stock carburetors (Solex, Bocar, Brosol, and Kadron) all run best with 1.5-2psi fuel pressure. Weber IDF, IDA, ICT, DFEV/DFAV, and DCNFs work best with 3-3.5psi, so this regulator works for all of them, even if you switch carburetors sometime in the future!

Related Items...
Vacuum (0-30 in-Hg) and Fuel Pressure Gauge (0-10psi) Tool
Price: $24.95
Vacuum (0-30 in-Hg) and Fuel Pressure Gauge (0-10psi) Tool
Rotary Electric Fuel Pump, 3.25 psi Low Pressure, 9mm Fuel Filter Inlet and 7.8mm Pump Outlet (Adaptable for VW 5mm/7mm hose use)
Price: $74.95
Rotary Electric Fuel Pump, 3.25 psi Low Pressure, 9mm Fuel Filter Inlet and 7.8mm Pump Outlet (Adaptable for VW 5mm/7mm hose use)
Brass Hose Barb Fitting, 1/4" Barb (to fit 5mm hose) x 1/8" NPT, EACH
Price: $3.50
Hose Barb Fitting, 1/4" Barb (to fit 5mm hose) x 1/8" NPT, EACH

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.