OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

Engle W120 Type 1 Camshaft, 1.1 or 1.25 Rockers
Engle W120 Type 1 Camshaft, 1.1 or 1.25 Rockers
 
The Engle W120 is a Hot Street VW Bug camshaft grind is designed for 1.1 or 1.25 rockers, and it's specs are .397" Cam Lift, .435" Valve Lift (1.1 Rockers), 294 degrees of advertised duration, and 253 degrees of duration at .050", on a 108 Lobe Center.

WIth more duration and slightly more lift than it's little brother the W110, this cam is designed to give more power at the top end while sacrificing low end. You can not use this with a stock carburetor, it will barely idle well with dual 1bbls or a centermount 2bbls. You really need at least dual 2bbls of carb for this cam to behave at idle and under 1500 RPM.

This cam really needs some port work and/or larger displacement to work properly. Expect a powerband of 2000-6000 RPMs, the more headwork and carburetion the better the low end will be. If you use 1.25 rockers, you will extend the top end to 6300 or so.

Dual springs are required with 1.1s or 1.25 rockers. Use a compression ratio of 8.75-9.5:1.

Price: $94.95
Country of Manufacture or Origin: MADE IN USA


: E6120


Cam Clearancing:


QTY:
Overview
 
The Engle W120 is a Hot Street VW Bug camshaft grind is designed for 1.1 or 1.25 rockers, and it's specs are .397" Cam Lift, .435" Valve Lift (1.1 Rockers), 294 degrees of advertised duration, and 253 degrees of duration at .050", on a 108 Lobe Center.

Related Items...
Billet Straight Cut Cam Gears, Steel
Price: $114.95
ACN Recommended Billet Straight Cut Cam Gears, Steel
CB Performance Super Stock Rockers, 1.1:1 Ratio (Rocker Arms)
Price: $159.95
CB Performance Super Stock Rockers, 1.1:1 Ratio (Rocker Arms)
CB Performance Super Stock Rockers, 1.25:1 Ratio (Rocker Arms) with Elephant's Foot Adjusters, CB1685EF
Price: $169.95
CB Performance Super Stock Rockers, 1.25:1 Ratio (Rocker Arms) with Elephant's Foot Adjusters, CB1685EF
Engle Lifters (Cam Followers), Type 1 Engines, Set of 8
Price: $59.95
Engle Lifters (Cam Followers), Type 1 Engines, Set of 8
Bolt On Cam Gear for Type 1 Engine, Made in USA, EACH
Price: $47.95
Bolt On Cam Gear, Made in USA, EACH
Engle Lifters (Cam Followers), EDM Oiling AND Phosphate Coating, Type 1 Engines, Set of 8
Price: $89.95
Engle Lifters (Cam Followers), EDM Oiling, Type 1 Engines, Set of 8
Forged 1.25 Ratio Rocker Arm Set, PAIR, Economy
Price: $209.95
Economy Forged 1.25 Ratio Rocker Arm Set, Pair
Engle Lifters (Cam Followers), Phosphate Coated, Type 1 Engines, Set of 8
Price: $69.95
Engle Lifters (Cam Followers), Phosphate Coated, Type 1 Engines, Set of 8

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!