OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

Engle FK44 Type 1 Camshaft, Ratio Rockers
Engle FK44 Type 1 Camshaft, Ratio Rockers
 
The Engle FK44 is a newer VW Cam for serious engines. It is designed for 1.4-1.5 rockers, and it's specs are .391" Cam Lift, .547" Valve Lift (1.4 Rockers) 287 degrees of advertised duration, and 258 degrees of duration at .050", on a 108 Lobe Center..

This is an excellent Ratio Rocker Grind, similar in behavior to the Engle 120/125, with a 3000-7000RPM Power band. It comes on strong in the mid range, make sure you match your head flow and valve lifts to the cam!

Dual springs are REQUIRED. Works best with Compression from 9.00-9.5:1. This cam is clearanced to work with all crankshaft strokes and rod combos.

Price: $159.95
Country of Manufacture or Origin: MADE IN USA


: E6044


QTY:
Overview
 
The Engle FK44 is a newer VW Cam for serious engines. It is designed for 1.4-1.5 rockers, and it's specs are .391" Cam Lift, .547" Valve Lift (1.4 Rockers) 287 degrees of advertised duration, and 258 degrees of duration at .050", on a 108 Lobe Center.
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Add your review too!

Related Items...
SCAT Forged 4340 Chromoly 1.4 Ratio Rocker Arm Set, PAIR, 20195
Price: $249.95
SCAT Forged 4340 Chromoly 1.4 Ratio Rocker Arm Set, Pair, 20195
Billet Straight Cut Cam Gears, Steel
Price: $114.95
ACN Recommended Billet Straight Cut Cam Gears, Steel
Engle Lifters (Cam Followers), EDM Oiling AND Phosphate Coating, Type 1 Engines, Set of 8
Price: $89.95
Engle Lifters (Cam Followers), EDM Oiling, Type 1 Engines, Set of 8
Engle Lifters (Cam Followers), Type 1 Engines, Set of 8
Price: $59.95
Engle Lifters (Cam Followers), Type 1 Engines, Set of 8
Engle Lifters (Cam Followers), Phosphate Coated, Type 1 Engines, Set of 8
Price: $69.95
Engle Lifters (Cam Followers), Phosphate Coated, Type 1 Engines, Set of 8
Bolt On Cam Gear for Type 1 Engine, Made in USA, EACH
Price: $47.95
Bolt On Cam Gear, Made in USA, EACH


  2 of 2 people found the following review helpful:
 
5 of 5 Just what I wanted October 15, 2014
Reviewer: Dennis Van Winkle from Borrego Springs, CA United States  
This Cam came just as advertised. I was told by other venders that the Cam would not come with stroke clearance. I emailed ACN and got an answer within 24 hours saying that it would have the clearance. I ordered the cam and had it 3 days later. Great service and a product that was exactly the way I wanted it. The cam fit in my 2387 with no modifications and the FK44 has a excellent mid-range pull.

Was this review helpful to you?