OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

Engle FK-65 Type 1 Camshaft, Ratio Rockers
Engle FK-65 Type 1 Camshaft, Ratio Rockers
 
The Engle FK65 is a very mild Ratio Rocker Grind. It is designed for 1.4-1.5 rockers, and it's specs are .342" Cam Lift, .478" Valve Lift (1.4 Rockers), 280 degrees of advertised duration, and 236 degrees of duration at .050", on a 108 Lobe Center.

This is a good cam for small or medium engines with very mild heads. It has a powerband from idle to 5000 RPM, with a silky idle. You can use any carb(s) with this with good results, even centermounts!

We recommend a Compression of 7.75-8:1, you can get by with single valvesprings with this cam.

Price: $159.95
Country of Manufacture or Origin: MADE IN USA


: E6065


QTY:
Overview
 
The Engle FK65 is a very mild Ratio Rocker Grind. It is designed for 1.4-1.5 rockers, and it's specs are .342" Cam Lift, .478" Valve Lift (1.4 Rockers), 280 degrees of advertised duration, and 236 degrees of duration at .050", on a 108 Lobe Center.

Related Items...
Engle Lifters (Cam Followers), EDM Oiling AND Phosphate Coating, Type 1 Engines, Set of 8
Price: $89.95
Engle Lifters (Cam Followers), EDM Oiling, Type 1 Engines, Set of 8
Engle Lifters (Cam Followers), Phosphate Coated, Type 1 Engines, Set of 8
Price: $69.95
Engle Lifters (Cam Followers), Phosphate Coated, Type 1 Engines, Set of 8
Billet Straight Cut Cam Gears, Steel
Price: $114.95
ACN Recommended Billet Straight Cut Cam Gears, Steel
SCAT Forged 4340 Chromoly 1.4 Ratio Rocker Arm Set, PAIR, 20195
Price: $249.95
SCAT Forged 4340 Chromoly 1.4 Ratio Rocker Arm Set, Pair, 20195
Bolt On Cam Gear for Type 1 Engine, Made in USA, EACH
Price: $47.95
Bolt On Cam Gear, Made in USA, EACH
Engle Lifters (Cam Followers), Type 1 Engines, Set of 8
Price: $59.95
Engle Lifters (Cam Followers), Type 1 Engines, Set of 8

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!