|
|
|
|
EMPI Raider Wheel, Anthracite w/Polished Lip, 15 x 5", 5 x 205mm, EACH, 9752 is a reproduction of a VERY rare wheel from the late 1960s! The original "Rader" wheel (note the spelling difference) was sold by Sears Roebuck & Co and the original EMPI for guys that wanted a unique look for their VW! Unavailable for decades, the Raider was then reproduced in the early 2000s, but it was very expensive and virtually impossible to get. Now it's easy!
This is a great wheel for wide-5 Beetles, Ghias, early Busses, and even early Type 3s! The Raider comes with the center cap and even a chrome valve stem too!
These wheels use 60 degree tapered seat lug nuts. ET is 20mm, and 3 3/4" back spacing.
This wheel is available in Anthracite, Black, or all Chrome. It's also available in 15 and 17" sizes!
As with all 5 x 205mm wheels, if you are using this on a Type 1 or 3 you will use 12mm wheel bolts, or wheel studs and wheel nuts. UNLESS you drill your drums/rotors out to 14mm.
But know that all Type 2s (Busses) use a 14 x 1.5mm thread size in the 5 x 205mm pattern! This is important when you are buying your wheel bolts, or when converting to wheel studs and wheel nuts!
|
|
|
|
|
|
|
|
Related Items... |
Chrome Lug Nuts, 14 x 1.5mm Thread, Porsche Acorn Style (Closed End), 60 Degree Tapered Seat, Set of 4, 70-2872
|
|
|
|
Chrome Lug Nut Kit, 12 x 1.5mm Thread, Acorn Style (Closed End), 60 Degree Tapered Seat, Set of 5, 9537
|
|
|
|
Chrome Lug Bolts (Wheel Bolts), 12 x 1.5mm Thread, 60 Degree Tapered Seat, Set of 5, 9711
|
|
|
|
EMPI BRM Wheel, Gloss Black with Polished Lip, 15 x 6.5", 5 x 205mm, EACH, 9629
|
|
|
|
Chrome Wheel Lock Kit (Wheel Bolts), 12 x 1.5 x 27mm Thread, 60 Degree Tapered Seat, Set of 4 with Key, 70-2706
|
|
|
|
Wheel Stud Kit, 12 x 1.5mm Thread (Both Ends), Set of 5, 9516
|
|
|
|
Chrome Steel Lug Nuts, 12 x 1.5mm Thread, Porsche Acorn Style (Closed End), 60 Degree Tapered Seat, Set of 5, 70-2870
|
|
|
|
Wheel Stud Kit, 14 x 1.5mm Thread (Both Ends), Set of 5, 9517
|
|
|
|
|
|