OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Body Panels & Repair > Beetle & Superbeetle
237 products found
SUBCATEGORIES:
Door & Rocker Fiberglass Body Parts
Floor Pan Front Body, Beetle
Front Body, Superbeetle Front Bumpers & Parts
Front Chassis Front Fenders, Beetle
Front Fenders, Superbeetle Rear Bumpers & Parts
Rear Fenders Rear Luggage, Apron, & Decklid
Rear Quarter Panel Running Boards
Sort By:
1 2 3 ... 5
Floor Pan Bolt (Pan to Body, Chassis to Mounting Bolt), 8 x 1.25mm
Floor Pan Bolt (Pan to Body, Chassis to Mounting Bolt), 8 x 1.25mm
Price: $0.95
SALE ITEM! use code TOOMANY30

Floor Pan Bolt (Pan to Body, Chassis to Mounting Bolt), 8 x 1.25mm is the pointy bolt that you can drive through rust and the floor pan gasket, to bolt your VW Body down tight to the floor pan or chassis. This does not include the washer. more info
Chrome Bumper Bolt (ONLY), 1967 and Earlier Type 1, per EACH
Chrome Bumper Bolt (ONLY), 1967 and Earlier Type 1, per EACH
Price: $1.95

more info
Floor Pan Washer (Pan to Body, Chassis to Mounting Washer), 311-899-131
Floor Pan Washer (Pan to Body, Chassis to Mounting Washer), 311-899-131
Price: $1.95
SALE ITEM! use code TOOMANY30

Floor Pan Washer (Pan to Body, Chassis to Mounting Washer), 311-899-131 is the washer the pointy pan bolt goes through, to bolt your VW Body down tight to the floor pan or chassis. This does not include the bolt. The Beetle needs 18 washers to do one full chassis, the Ghia needs 24. more info
Weld-In Fender Nut, 8 x 1.25mm, EACH, N114071
Weld-In Fender Nut, 8 x 1.25mm, EACH, N114071
Price: $1.95

Weld-In Fender Nut, 8 x 1.25mm, EACH, N114071 are the incredibly tough to find nut-serts (Fender Nuts) that are pressed in or welded into the body, that the fender bolts thread into. Rusted bolts often break these loose, as do accidents. You don't change these unless you really have to, but until now these had to be robbed from cars that were parted out. There are thousands of cars running around with nuts and huge fender washers in the trunk, because owners couldn't find these to do the repair right! more info
"Large" Floor Pan BOLT (Pan to Body, Chassis to Mounting Bolt), 10 x 1.5 x 50mm, EACH, 111-899-147
"Large" (50mm long) Floor Pan BOLT (Pan to Body, Chassis to Mounting Bolt), 10 x 1.5 threads, EACH, 111-899-147
Price: $1.95
SALE ITEM! use code TOOMANY30

"Large" Floor Pan BOLT (Pan to Body, Chassis to Mounting Bolt), 10 x 1.5 x 50mm, EACH, 111-899-147 is the larger floor pan bolt near the front of the pan. Most kits don't include these, and they can be tough to find! more info
Chrome Bumper Bolt (ONLY), 1968 and Newer T1, per EACH
Chrome Bumper Bolt (ONLY), 1968 and Newer T1, per EACH
Price: $2.50

more info
Bumper Bolt w/Nut (EACH), for 1968-79 Beetle & Superbeetle
Bumper Bolt w/Nut (EACH), for 1968-79 Beetle & Superbeetle
Price: $2.95

more info
Bumper Bracket Spacer, Front or Rear, 1950-67 Type 1, 111-707-121HD
Bumper Bracket Spacer, 1950-67 Type 1, Front or Rear, 111-707-121HD
Price: $3.95

Bumper Bracket Spacer, Front or Rear, 1950-67 Type 1, 111-707-121HD is the bumper bracket spacers that fits between the bumper bracket to the bumper. Gives your deck lid room to open without hitting your bumper.  These are sold per EACH. more info
Washers, Rubber, Running Board to Fender, (4 pc set) for ALL BEETLES
Washers, Rubber, Running Board to Fender, (4 pc set) for ALL BEETLES
Price: $3.95

more info
Shock Pad, Body to Axle Beam, Front, All Standard Beetle, Karmann Ghia, and Thing, PAIR, 111-899-123A-111-123A
Shock Pad, Body to Axle Beam, Front, All Standard Beetle, Karmann Ghia, and Thing, PAIR, 111-899-123A-111-123A
Price: $4.95

Shock Pad, Body to Axle Beam, Front, All Standard Beetle, Karmann Ghia, and Thing, PAIR, 111-899-123A-111-123A sit on top of the axle beam to prevent body flex and vibration. The pan bolts pass thru the washers then these pads, holding the body tight! more info
Overrider Plugs, Pre 1967 Beetle, Set of 4
Overrider Plugs, Pre 1967 Beetle, Set of 4
Price: $5.95

These plugs close the open hole in the fender when you install a blade only bumper on your 1967 or older VW Beetle. Set of 4 to plug all 4 overrider holes in the body left by removing the overriders. more info
Shock Pad, Body to Chassis, Rear, 10mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-117B-113-115A
Shock Pad, Body to Chassis, Rear, 10mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-117B-113-115A
Price: $5.95
SALE ITEM! use code TOOMANY30

Shock Pad, Body to Chassis, Rear, 10mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-117B-113-115A sit between the pan and body, and dampen road vibration. Typically there are 2 thicknesses used, 10mm and 17mm, these are the 10mm. Ideally you'd buy 2 sets of the 10mm thick, and 1 set of the thicker ones. Put the thin ones on all 4s, and IF there is a gap at one of the locations (typically the rear one in the rear wheel well), swap them out for the thicker ones, then bolt it down.

Warning: it's very common for the bolt that holds the body to the chassis to be very seized, be sure to use a lot of penetrating oil and work it back and forth to loosen it, shearing it off is a pain to deal with!

Also, if you have a 1968 and later car with a "clunk" in the back that you can't figure out (you'd changed shocks with no luck), usually the rear pads are compressed, and the body has a gap to the chassis. The body is flexing when you hit a bump, and hitting the pad. Using the thick pad and tightening the bolt down to prevent the flex will solve the problem!

 more info
Shock Pad, Body to Chassis, Rear, 17mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-115A-113-115
Shock Pad, Body to Chassis, Rear, 17mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-115A-113-115
Price: $5.95

Shock Pad, Body to Chassis, Rear, 17mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, 111-899-115A-113-115 sit between the pan and body, and dampen road vibration. Typically there are 2 thicknesses used, 10mm and 17mm, these are the 17mm. Ideally you'd buy 2 sets of the 10mm thick, and 1 set of the thicker ones. Put the thin ones on all 4s, and IF there is a gap at one of the locations (typically the rear one in the rear wheel well), swap them out for the thicker ones, then bolt it down.

Warning: it's very common for the bolt that holds the body to the chassis to be very seized, be sure to use a lot of penetrating oil and work it back and forth to loosen it, shearing it off is a pain to deal with!

Also, if you have a 1968 and later car with a "clunk" in the back that you can't figure out (you'd changed shocks with no luck), usually the rear pads are compressed, and the body has a gap to the chassis. The body is flexing when you hit a bump, and hitting the pad. Using the thick pad and tightening the bolt down to prevent the flex will solve the problem!

 more info
Bumper Bracket Grommet, Type 1 to 1967, 111-707-197A
Bumper Bracket Grommet, Type 1 to 1967, 111-707-197A
Price: $7.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Bumper Bracket Grommet, Type 1 to 1967, 111-707-197A is the rubber grommet that keeps mud and rocks from the fenderwell from making it's way through the body holes and spoiling your nice looking paint job! They also prevent rust from forming along seams. more info
Battery Hold Down Clamp, 1967 and Later Beetle and Super Beetle, 1968-71 Ghia, 1968-71 Type 2, 1967 and Later Type 3, 131-915-313
Battery Hold Down Clamp, 1967 and Later Beetle and Super Beetle, 1968-71 Ghia, 1968-71 Type 2, 1967 and Later Type 3, 131-915-313
Price: $7.95
SALE ITEM! use code TOOMANY30

Battery Hold Down Clamp, 1967 and Later Beetle and Super Beetle, 1968-71 Ghia, 1968-71 Type 2, 1967 and Later Type 3, 131-915-313 hold the battery down tight, so it doesn't flop and bounce around, which can cause major clunking and even a fire if the battery grounds out! more info
Bumper Bracket, Front, 1949-67 Type 1, 111-707-135A and 111-707-136A
Bumper Bracket, Front, 1949-67 Type 1, 111-707-135A and 111-707-136A
Price: $8.95

Bumper Bracket, Front, 1949-67 Type 1, 111-707-135A and 111-707-136A is the bracket that holds the bumper to the car. It's held on with 2 13mm bolts under the fender. These are often bent or "not straight" from repeated abuse. Sold per each! more info
Clips, Running Board Molding (10 pc.) for ALL BUGS 1967-72 -Set
Clips, Running Board Molding (10 pc.) for ALL BUGS 1967-72 -Set
Price: $8.95

more info
Clips, Running Board Molding (10 pc.) for ALL BEETLES 1973-79 -Set
Clips, Running Board Molding (10 pc.) for ALL BEETLES 1973-79 -Set
Price: $8.95

more info
License Plate Bracket, 1968-79 Type 1 Front and Rear, AND 1950-79 Type 2, 113-943-901-113-905
License Plate Bracket, 1968-79 Type 1 Front and Rear, AND 1950-79 Type 2, 113-943-901-113-905
Price: $8.95
SALE ITEM! use code TOOMANY30

License Plate Bracket, 1968-79 Type 1 Front and Rear, AND 1950-79 Type 2, 113-943-901-113-905 often gets mangled or lost during paint jobs and license plate transfers. These are inexpensive and give a good finished look, instead of all raggedy with bent/painted brackets! more info
Bumper Bracket, Rear, 1949-67 Beetle, EACH, 111-707-336B
Bumper Bracket, Rear, 1949-67 Beetle, EACH, 111-707-335B or 111-707-336B
Price: $9.95

Bumper Bracket, Rear, 1949-67 Beetle, EACH, 111-707-335B or 111-707-336B is the bracket that holds the bumper to the car. It's held on with (2) 13mm bolts under the fender. These are often bent or "not straight" from repeated abuse. These are longer than front. more info
Fender Hardware Kit (Fender Installation Kit), One Fender, 111-898-051
Fender Hardware Kit (Fender Installation Kit), One Fender, 111-898-051
Price: $9.95

Fender Hardware Kit (Fender Installation Kit), One Fender, 111-898-051 includes extended head bolts for easier installation of your fender, since the socket won't slip off as easily! (11) bolts, (12) washers, and (1) nut  included (the nut and extra washer is for the running board!). One kit does one fender, you'll need 4 of these to do one car! more info
Front License Plate Mounting Kit, 1954-67 Beetle and 1956-71 Karmann Ghia, 113-707-901B
Front License Plate Mounting Kit, 1954-67 Beetle and 1956-71 Karmann Ghia, 113-707-901B
Price: $9.95

Front License Plate Mounting Kit, 1954-67 Beetle and 1956-71 Karmann Ghia, 113-707-901B is the kit with the small P-clamps which hangs your license plate from the upper tube on your front bumper! You need 1 of these per car to do the front. more info
Headlight Wire Tube (Rubber), 1958-66 Beetle and Karmann Ghia Sedan and Convertible, PAIR, 111-185
Headlight Wire Tube (Rubber), 1958-66 Beetle and Karmann Ghia Sedan and Convertible, PAIR, 111-185
Price: $9.95

Headlight Wire Tube (Rubber), 1958-66 Beetle and Karmann Ghia Sedan and Convertible, PAIR, 111-185 are the critical rubber tube which runs between the front quarter panel, and the headlight bucket on the fender. This keeps the headlight wiring safe and dry! These are often cracked or missing, and water, rocks, sand, and gravel are destroying the delicate headlight wires!

To install these you must use a needle or end of a paperclip, shoved into the headlight bulb end of the plug. This releases the lock tab on the slip on wire end, and allows you to wiggle the wire out of the plug. Do all 3. Fish the wires through the new boot, put the boot into the holes on the body and headlight bucket, then re-install the wire ends into the clip, and plug it back in!
 more info
Clips, Running Board Molding (10 pc.) for ALL BEETLES 1946-66 -Set
Clips, Running Board Molding (10 pc.) for ALL BEETLES 1946-66 -Set
Price: $10.95

more info
Bumper Mounted Turn Signal Assembly, 1968-73 Front Beetle and Super Beetle with Mexican Bumper, EACH, 113-953-049AK-TS
Bumper Mounted Turn Signal Assembly, 1968-73 Front Beetle and Super Beetle with MEXICAN Bumper, EACH, 113-953-049AK-TS
Price: $10.95

Bumper Mounted Turn Signal Assembly, 1968-73 Front Beetle and Super Beetle with Mexican Bumper, EACH, 113-953-049AK-TS are the new TS Assemblies used in the Mexican front bumpers. Removing the turn signals off the top of the fenders gives a super clean look! more info
Deck Lid Hardware Kit, 1968 and Newer VW Beetle and Karmann Ghia, Stainless Steel
Deck Lid Hardware Kit, 1968 and Newer VW Beetle and Karmann Ghia, Stainless Steel
Price: $12.95

Deck Lid Hardware Kit, 1968 and Newer VW Beetle and Karmann Ghia, Stainless Steel includes the stainless stuff you need to bolt the deck lid to the car, and also includes the latch and light housing hardware too! more info
Deck Lid Hardware Kit, 1966 and Older VW Beetle and Karmann Ghia, Stainless Steel
Deck Lid Hardware Kit, 1966 and Older VW Beetle and Karmann Ghia, Stainless Steel
Price: $12.95

Deck Lid Hardware Kit, 1966 and Older VW Beetle and Karmann Ghia, Stainless Steel includes the stainless stuff you need to bolt the deck lid to the car, and also includes the latch and light housing hardware too! more info
Headlight Wire Tube (Rubber), 1967+ Beetle and Super Beetle Sedan and Convertible, PAIR, 111-941-185C
Headlight Wire Tube (Rubber), 1967+ Beetle and Super Beetle Sedan and Convertible, PAIR, 111-941-185C
Price: $12.95

Headlight Wire Tube (Rubber), 1967+ Beetle and Super Beetle Sedan and Convertible, PAIR, 111-941-185C are the critical rubber tube which runs between the front quarter panel, and the headlight bucket on the fender. This keeps the headlight wiring safe and dry! These are often cracked or missing, and water, rocks, sand, and gravel are destroying the delicate headlight wires!

To install these you must use a needle or end of a paperclip, shoved into the headlight bulb end of the plug. This releases the lock tab on the slip on wire end, and allows you to wiggle the wire out of the plug. Do all 3. Fish the wires through the new boot, put the boot into the holes on the body and headlight bucket, then re-install the wire ends into the clip, and plug it back in! more info
Hood or Decklid Seal Channel, Front or Rear, Beetle and Superbeetle, 111-813-311, 3' Section
Hood or Decklid Seal Channel, Front or Rear, Beetle and Superbeetle, 111-813-311
Price: $14.95

Hood or Decklid Seal Channel, Front or Rear, Beetle and Superbeetle, 111-813-311, 3' Section, is the piece that your stock decklid seal or hood seal is crimped by. It is spot welded to the body and apron, and is lightly crimped onto the seal. Price is for one 3' section.

 more info
Fender Beading and Fender Bolt Kit with Washers, Does ONE Fender, 113-898-022
Fender Beading and Fender Bolt Kit with Washers, Does ONE Fender, 113-898-022
Price: $14.95

Fender Beading and Fender Bolt Kit with Washers, Does ONE Fender, 113-898-022 includes the fender beading, fender bolts, washers, and even the running board grommet! Stop wasting time with corroded and rusted bolts, and make your life easier! more info
Inner Rear Wheel Panel (Small), Right, 1946-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-126
Inner Rear Wheel Panel (Small), Right, 1946-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-126
Price: $15.95

Inner Rear Wheel Panel (Small), Right, 1946-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-126 fits right behind the heater channel at the lower front of the rear wheelwell, and is a commonly rusted area. This part requires welding to install. more info
Inner Rear Wheel Panel (Small), Left, 1946-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-125
Inner Rear Wheel Panel (Small), Left, 1946-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-125
Price: $15.95

Inner Rear Wheel Panel (Small), Left, 1946-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-125 fits right behind the heater channel at the lower front of the rear wheelwell, and is a commonly rusted area. This part requires welding to install. more info
Bumper Bracket Hardware Kit, VW Beetle and Karmann Ghia to 1967, Stainless Steel
Bumper Bracket Hardware Kit, VW Beetle and Karmann Ghia to 1967, Stainless Steel
Price: $16.95

Bumper Bracket Hardware Kit, VW Beetle and Karmann Ghia to 1967, Stainless Steel includes the stainless bolts and washers to bolt your bumper brackets to the car body. Does all 4 bumper brackets on your Early VW Beetle or Karmann Ghia. more info
Front Hood Latch (Lock Carrier) with Push Button Pin, Upper (On Hood) , 1952-67 Beetle, 111-823-507A
Front Hood Latch (Lock Carrier) with Push Button Pin, Upper (On Hood) , 1952-67 Beetle, 111-823-507A
Price: $17.95

Front Hood Latch (Lock Carrier) with Push Button Pin, Upper (On Hood) , 1952-67 Beetle, 111-823-507A is bolted on the under side of the hood, with bolts that thread into the hood handle. This keeps the hood closed even if it's unlatched. more info
Front Hood Latch (Lock Carrier) with Push Button Pin, Upper (On Hood) , 1968 and Newer Beetle and Super Beetle, 111-823-507F
Front Hood Latch (Lock Carrier) with Push Button Pin, Upper (On Hood) , 1968 and Newer Beetle and Super Beetle, 111-823-507F
Price: $17.95

Front Hood Latch (Lock Carrier) with Push Button Pin, Upper (On Hood) , 1968 and Newer Beetle and Super Beetle, 111-823-507F is bolted on the under side of the hood, with bolts that thread into the hood handle. This goes into the Lower Hood Latch (catch), and keeps the hood closed properly! more info
Hood Latch Receiver, Lower On Apron, 1949-67 Beetle, 111-823-509B
Hood Latch Receiver, Lower On Apron, 1949-67 Beetle, 111-823-509B
Price: $19.95
SALE ITEM! use code TOOMANY30

Hood Latch Receiver, Lower On Apron, 1949-67 Beetle, 111-823-509B is bolted to the front apron. It has a tapered receiver and lock to retain the Upper Hood Latch that is bolted to the front hood. The hood cable releases the catch. more info
Hood Latch Receiver, Lower On Apron, 1968 and Newer Beetle and Super Beetle, 111-813-509C
Hood Latch Receiver, Lower On Apron, 1968 and Newer Beetle and Super Beetle, 111-813-509C
Price: $19.95

Hood Latch Receiver, Lower On Apron, 1968 and Newer Beetle and Super Beetle, 111-813-509C is riveted to the front apron. It has a tapered receiver and lock to retain the Upper Hood Latch that is bolted to the front hood. The hood cable releases the catch. more info
Hood Handle, Chrome, 1968 and Later Beetle and Super Beetle, 113-823-565F
Chrome Hood Handle, for 1968 and Later Beetle and Super Beetle, 113-823-565F
Price: $19.95

Hood Handle, Chrome, 1968 and Later Beetle and Super Beetle, 113-823-565F sits on the outside of the hood, and the Front Hood Latch bolts into it from the underside of the front hood. There is a button for the Push Button to be depressed to release it. more info
Stainless Bumper Bracket Hardware Kit, for 1968 and Later VW Beetle and Karmann Ghia
Stainless Bumper Bracket Hardware Kit, 1968 and Later VW Beetle and Karmann Ghia
Price: $19.95

Stainless Bumper Bracket Hardware Kit, for 1968 and Later VW Beetle and Karmann Ghia includes the stainless bolts and washers to bolt your bumper brackets to the car body. Does all 4 bumper brackets on your LATE VW Beetle or Karmann Ghia. more info
Beetle & Super Beetle Deck Lid Prop, Chrome
Beetle & Super Beetle Deck Lid Prop, Chrome
Price: $19.95

Beetle & Super Beetle Deck Lid Prop, Chrome is a quick and easy way to keep your VW Bug or Super Beetle deck lid open, even if you don't have the springs! This is a great item to have if you are using deck lid standoffs, or the spring is simply missing!

Simply slip the ends into your stock hinge holes.

This is made from high carbon steel for maximum strength, then is hard chrome plated. A rubber paint protector is located where it contacts your deck lid.

Easy to install with no drilling required, and this item stores easily in the trunk or under a front seat. more info
1968-73 Mexican Front Bumper Impact Strip, Outside, EACH (Need 2), 113-807-225B
1968-73 MEXICAN Front Bumper Impact Strip, Outside, EACH (Need 2), 113-807-225B
Price: $19.95

1968-73 Mexican Front Bumper Impact Strip, Outside, EACH (Need 2), 113-807-225B gives your new Mexican Front Bumper (with Turn Signals) a factory appearance! These bolt to the center of the bumper for a little bit of protection against parking errors! You need TWO (2) of these to do one front bumper. Don't forget the impact strip between the turn signals too! more info
Rear Decklid Seal, Beetle and Superbeetle, Mexibeetle
Rear Decklid Seal, Beetle and Superbeetle, Mexibeetle
Price: $24.95

This is the best decklid seal available for your VW bug or superbeetle. It slips on (without screws) to your decklid, and the air-filled bubble-seal presses against the body of the car, for a leakless seal. Even works if your normal seal channel is gone!

MADE IN USA!

 more info
Bumper Bracket, Front Left, 1968-73 VW Beetle and Super Beetle, 133-707-133AHD
Bumper Bracket, Front Left, 1968-73 VW Beetle and Super Beetle, 133-707-133AHD
Price: $24.95

Bumper Bracket, Front Left, 1968-73 VW Beetle and Super Beetle, 133-707-133AHD is a replacement bumper bracket for those tweaked and rusted original brackets! Most 40yo cars these have been hit and bent several times, they are cheap so replacement is wise more info
Bumper Bracket, Front Right, 1968-73 VW Beetle and Super Beetle, 133-707-134AHD
Bumper Bracket, Front Right, 1968-73 VW Beetle and Super Beetle, 133-707-134AHD
Price: $24.95

Bumper Bracket, Front Right 1968-73 VW Beetle and Super Beetle 133-707-134AHD is a replacement bumper bracket for those tweaked and rusted original brackets! Most 40yo cars these have been hit and bent several times, they are cheap so replacement is wise. more info
Bumper Hardware Kit, VW Beetle and Karmann Ghia to 1967, Stainless Steel
Bumper Hardware Kit, VW Beetle and Karmann Ghia to 1967, Stainless Steel
Price: $24.95

Bumper Hardware Kit, VW Beetle and Karmann Ghia to 1967, Stainless Steel includes the stainless bolts and washers to bolt your bumper brackets to the bumper itself. Does all 4 bumper brackets on your Early VW Beetle or Karmann Ghia. more info
End Caps, Front Bumper, 1974-79 Beetle and Super Beetle, Pair, 133-145-LR
End Caps, Front Bumper, 1974-79 Beetle and Super Beetle, PAIR, 133-145-LR
Price: $24.95

End Caps, Front Bumper, 1974-79 Beetle and Super Beetle, Pair, 133-145-LR are often cracked, discolored, or missing from little scrapes! Restore your car to a new appearance with crisp black contrasting Bumper End Caps, don't forget the impact strip too! more info
Rear Quarter Section Behind Door, Short, 17" Long x 6" High, Right, 1952-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-160K
Rear Quarter Section Behind Door, Short, 17" Long x 6" High, Right, 1952-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-160K
Price: $24.95

Rear Quarter Section Behind Door, Short, 17" Long x 6" High, Right, 1952-79 VW Beetle and Super Beetle Sedan and Convertible, 111-809-160K is a commonly rusted area between the door and the rear fender. This is the shorter version of this part, and requires welding to install. more info
Lower Door Skin, Short (37 x 5"), LEFT, 1949-79 Beetle and Super Beetle Sedan and Convertible, 113-831-063
Lower Door Skin, Short (37 x 5"), LEFT, 1949-79 Beetle and Super Beetle Sedan and Convertible, 113-831-063
Price: $24.95

Lower Door Skin, Short (37 x 5"), LEFT, 1949-79 Beetle and Super Beetle Sedan and Convertible, 113-831-063 is made of die-formed and shaped heavy-gauge primer-coated steel for protection. Must be welded into place! Doors often get rust and corrosion that this addresses.

 more info
Lower Door Skin, Short (37 x 5"), RIGHT,1949-79 Beetle and Super Beetle Sedan and Convertible, 113-831-064
Lower Door Skin, Short (37 x 5"), RIGHT,1949-79 Beetle and Super Beetle Sedan and Convertible, 113-831-064
Price: $24.95

Lower Door Skin, Short (37 x 5"), RIGHT,1949-79 Beetle and Super Beetle Sedan and Convertible, 113-831-064 is made of die-formed and shaped heavy-gauge primer-coated steel for protection. Must be welded into place! Doors often get rust and corrosion that this addresses.

 more info
Seat Track Rail (Welded to Floor Pan), 1956-70 Beetle, EACH, 113-701-435
Seat Track Rail (Welded to Floor Pan), 1956-70 Beetle, EACH, 113-701-435
Price: $24.95

Seat Track Rail (Welded to Floor Pan), 1956-70 Beetle, EACH, 113-701-435 is a commonly rusted piece which the seat slips onto. This is welded to the floor pan, properly locating and angling the front seat. Requires welding! You need 2 of these to do both front seats on one car! more info
   
 
1 2 3 ... 5
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.