INSERTS NOT INCLUDED (Must be purchased separately) The DRILL BIT IS NOT INCLUDED in the kit for spark plug repair, as it is not needed.
|
|
|
|
|
|
|
Big-Sert (Time-Sert) Tool Rental, 14 x 1.25mm (14mm Spark Plugs), Super-Duty Repair, 5141S is the best thread repair kit available. This size is typically used to repair damaged spark plug threads that have already been "fixed" (Heli-coil!) but blew out again! If you have a super loose or super tight spark plug, you will probably need this tool soon! This tool cuts to a 18mm ID, which will repair MOST previously repaired inserts. If you are not sure you should measure yours! This size is typically used to repair damaged spark plug threads in cylinder heads. For this item we recommend Copper Repair Inserts, it is more consistent size-wise, and has better heat transfer, than the steel inserts. The rental period for this kit is: ONE MONTH.
Time-Sert inserts are superior in every way to typical "Heli Coil" thread repair kits (which are usually wrapped wire, very weak and troublesome to install!), Wire inserts can leak Loctite from the outside of the insert to the inside seizing on the plug, which can not happen with Time-Sert Inserts because they are solid! Time-Sert inserts also have a flared shoulder that prevents leakage, and provides a fixed depth of installation, it is impossible to install the insert "too far".
This kit contains a Counterbore Bit, Tap, and Installation Driver. It does NOT contain a drill bit (as it is not needed to repair an already existing spark plug hole). To use the tool and affect your repair, you will need to supply: a drill, a Tap Handle, and high heat Thread Locker (Loctite #266 Red High Heat is what Time-Sert Recommends) -- These items are NOT included in the rental.
**Please also note that this rental does NOT include any inserts. They are sold separately (seee Related Items list at bottom right of this page), and Purchase of inserts is required as a condition of Tool Rental.WE REQUIRE THAT YOU PURCHASE INSERTS AT THE SAME TIME AS RENTING THIS TOOL. We do not rent the tool unless you purchase inserts from us to use along with it.
Rental Fee $65.00 $300 Tool Core charged AT TIME OF SHIPMENT (refunded upon return per terms of service)
|
Restrictions: Rentals are available for USA Orders Only
Availability: Ships when available (may be delayed if out on loan)
: BIG-SERT-RENTAL-5141S
|
|
|
|
|
|
|
|
|
|