OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Exhaust & Mufflers >

A-1 Performance Upright Manx and Buggy Merged Racing HEADER (Muffler NOT included), J-pipes INCLUDED (No Heater Boxes), 1 1/2, 1 5/8, 1 3/4" Tubing

A-1 Performance Upright Manx and Buggy Merged Racing HEADER (Muffler NOT included), J-pipes INCLUDED (No Heater Boxes), 1 1/2, 1 5/8, 1 3/4" Tubing
This photo shows the header AND a Bombshell Muffler (Vertical Muffler). Another picture shows the header and Crossflow Muffler (Horizontal Muffler). MUFFLERS ARE NOT INCLUDED AND MUST BE PURCHASED SEPARATELY!
 
A-1 Performance Upright Manx and Buggy Merged Racing HEADER (Muffler NOT included), J-pipes INCLUDED (No Heater Boxes), 1 1/2, 1 5/8, 1 3/4" Tubing is a serious exhaust system for serious racers! These are designed for maximum ground clearance!

Each one is hand made by a master exhaust system craftsman for YOUR car! Remember that Exhaust Tubing is measured on the OUTSIDE (Not Inside), stock is 1 1/4". We recommend 1 5/8" for applications up to 190hp, 1 3/4" size is needed for 190hp or greater!

A-1 Racing Headers are designed with a silky smooth 'Superflo' merged collector (see the cut-away comparison photos), and offer dyno-proven performance. The maximum ground clearance these headers have is icing on the cake! Equal length (tuned) mandrel bent tubing delivers TOP HP and torque at all RPMs. These are not the Chinese made "headers" (term used very loosely) that won't even bolt up to your engine (and when they do, they are lop-sided!)! Check out the examples of typical "Cheap" headers in the collector cut away photos so you know exactly what you are avoiding!

A-1's headers are hand-built with Heavy Duty 16 gauge steel tubing, not that paper thin junk! Are you sick of flanges that are warped out of the box, or that bend during normal exhaust tightening? End THAT once and for all with these Double Thick Tru Flat 3/8" head and collector flanges that are so straight you don't even need gaskets if you don't want to use them! Remember that Exhaust Tubing is measured on the OUTSIDE (Not Inside)


Base Price $379.95
Country of Manufacture or Origin: Made in USA


: A-1-BUGGY-HEADER-112-158-134

Vehicle Application


Primary Tube Size


Choose Exhaust Finish / Coating



Ceramic Coating is a life EXTENDER, not a lifetime coating. In other words, you should expect the coating to make the pipes last longer than normal but don't expect the coating to be shiny or to last forever. Normal lifespan varies according to where you live and if you drive the car in the winter in the salt zones. Salt zone, daily driver summer and winter the systems should last about 4 to 5 years normally.
O2 Sensor Options



O2 sensor is useful for Wideband Tuning, or for Closed Loop FI functionality. The Single O2 Sensor Option places an O2 bung in the collector at the 9 o'clock position. The O2 Sensor x 4 Option allows for individual cylinder monitoring.
_
Custom Made Item Agreement

I AGREE TO THE CUSTOM ORDER (Non-Returnable) TERMS FOR THIS ITEM.

CUSTOM MADE TO ORDER ITEM TERMS AND CONDITIONS
A-1 Performance Exhaust products are CUSTOM BUILT TO ORDER. You are charged for Custom Made To Order items in advance of shipment, usually within 1-2 business days of order submission. However, time until shipment will be AT LEAST 3 weeks, and may be longer to allow time for manufacture, coating (if applicable), and shipping time in transit. There is no guarantee on timeframe of delivery, but typically A-1 products are done and shipped within 3-6 weeks. Your A-1 items will ship to you separately from your other requested items, and via UPS Ground regardless of the shipping method you select at time of order. US Postal Service shipment and International Shipment is only available by special arrangement (and may be subject to an additional surcharge).There are NO CANCELLATIONS, NO RETURNS and NO REFUNDS/EXCHANGES on A-1 Performance Exhaust products except at the sole discretion of Aircooled.Net. Any issues must be reported within 48 hours of receipt of your product.




QTY:
Overview More Info
 
A-1 Performance Upright Manx and Buggy Merged Racing HEADER (Muffler NOT included), J-pipes INCLUDED (No Heater Boxes), 1 1/2, 1 5/8, 1 3/4" Tubing is a serious exhaust system for serious racers! These are designed for maximum ground clearance!

Each one is hand made by a master exhaust system craftsman for YOUR car! Remember that Exhaust Tubing is measured on the OUTSIDE (Not Inside), stock is 1 1/4". We recommend 1 5/8" for applications up to 190hp, 1 3/4" size is needed for 190hp or greater!
Item Features
These headers have slip-fit tubes which connect the J-pipes to the header. They fit perfectly in Raw Steel (Un-coated), but if you get them Ceramic Coated it's likely they will be too tight, since the coating thickness eliminates what little play you had. If they are too tight, your first step is to make sure there are no burrs on the OD and ID of the tubing, that may be causing it to hang up. If that doesn't work, You'll have to gently sand the OD of the tubing (the Ceramic) to allow it to fit. When it's finally fitting without cursing, brush on some Milk of Magnesia (not a joke) or Never-Seize, it's slick and won't burn off, this will make installation and your removal in the future a much easier job!

Related Items...
A-1 Performance Bombshell MUFFLER for Upright Manx and Buggy Merged Racing Headers (Header NOT included)
Base Price $149.95
A-1 Performance Bombshell MUFFLER for Upright Manx and Buggy Merged Racing Headers (Header NOT included)
A-1 Performance DUAL Bombshell MUFFLER for Upright Manx and Buggy Merged Racing Headers (Header NOT included)
Base Price $249.95
A-1 Performance DUAL Bombshell MUFFLER for Upright Manx and Buggy Merged Racing Headers (Header NOT included)
A-1 Performance Crossflow MUFFLER for Upright Manx and Buggy Merged Racing Headers (Header NOT included)
Base Price $169.95
A-1 Performance Crossflow MUFFLER for Upright Manx and Buggy Merged Racing Headers (Header NOT included)

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!