OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

Schadek 26mm Oil Pump, 8mm Pump Studs, 111-115-107AKHD
Schadek 26mm Oil Pump, 8mm Pump Studs, 111-115-107AKHD


 
Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. We feel 30mm pumps are over sized in most cases, a 26mm is more than big enough IF you follow our blueprinting instructions! Too much pressure causes hot oil! Many new oil pumps are of inferior quality these days, obviously we carry the best available, which are genuine Schadek! Clearances are tight and they wear well. They also work with 3 AND 4 bolt cams! (we tell you how) We recommend 21 or 26mm for stock and mild engines with the T-1 based engine, and 30mm for T-1 and 3 race cars.

WARNING: a 30mm pump in a Type 1 or Type 3 engine can blow out your oil cooler or cooler seals with 30, 40, or 20-50 weight oil when cold if you don't modify the pressure relief system! Many people are not aware that VW machines the oil pump bore (in the case) to about 2.7559-2.7570", and the pump body should measure 2.7570". This results in a perfect or SLIGHT interference fit, which is why you need a puller to get it out (if you don't need a puller, you have an undersized pump).

These pumps provide much more pressure than "stock" unmodified pumps! With these tight tolerances, you MUST be careful you don't overwhelm the stock oil pressure relief system. These can easily generate over 200psi on with thick oil and cold weather!
Price: $44.95


: 111-115-107AKHD

Modification Service Option

Drill and Tap Oil Pump:


QTY:
Overview
 
Schadek 26mm Oil Pump, 8mm Pump Studs fits late Type 1/2/3s with 1500-1600cc based engines. We feel 30mm pumps are over sized in most cases, a 26mm is more than big enough IF you follow our blueprinting instructions! Too much pressure causes hot oil!
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Add your review too!

Related Items...
8mm Self Sealing Oil Pump Nut, per EACH, 111-115-161
Price: $3.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
8mm Self Sealing Oil Pump Nut, 111-115-161
Oil Pump Cover Plate, Type 1 Based Engines, 8mm Studs, 311-115-141C
Price: $19.95
Oil Pump Cover Plate, Type 1 Based Engines, 8mm Studs, 311-115-141C


  1 of 1 people found the following review helpful:
 
5 of 5 First quality oil pump February 26, 2013
Reviewer: Rick Helsabeck from Blackshear, GA United States  
I can safely say that this pump is as good as the pump VW installed on their engines at the factory.  Great build quality and fits like a glove.

Was this review helpful to you?